Transfer finished material from one unit to other with excise

Hello to all
we are manufacturing Crane and we want to transfer a finished product from one unit to other unit with taken 50% credit on Excise
.we are use that crane for Home comsuption .
we are waiting for your reply.
please give us step by step procerdure
thanks
regard, riten
Edited by: riten patel on May 26, 2009 12:23 PM

hello
i have already do it using j1id
but still i do not get 50% credit on this material
first i make po of this materia
then declare this material as Asset using j1id t code
then make grv of this material
then I made invoice using j1iex
but still do not get 50% credit on excise
when i simulate that invoice i got one erroa as
"NO CENVAT AMOUNT TO BE POSTED"
"NO CENVAT AMOUNT TO BE REVERSED"
so tell me what is its solution
i am waiting your responce
thanks
regard,
riten

Similar Messages

Transfer the material from one plant(non valuated) to another plant valuat

Hi All,
How to transfer the material from one plant(non valuated) to another plant valuated.
Which Goods Movement type we required to use.
Regards,
Amit Shah

Hello,
Please refer the link below. hope it could be a help.
stock transfer plant to plant
split valuation
Regards,
Jana

Movement of material from one plant to other within the same country

Hello,
I would like to move material from one plant to other via tran MB1B.
The system generates the following error while trying to save document :
Account determination for entry BAS1 BSX 9000 ___ C100 not possible
The system did not find an account for this transaction. This means that the account determination for key BAS1 BSX 9000 ___ C100 is not maintained in MM Customizing (Valuation). The key is made up of:
Chart of account
Transaction key (= Posting transaction)
Valuation grouping code
Account grouping code
Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Can you please tell me where the necessary setting should be made.
Thanks

Hi
Please check the confirguration in OBYC for this combination and assign GL account for this combination of Valuation class, Valuation area.
Regards,
Lakshmanan Krishnan

How to transfer all materials from one plant to other plants?

How to transfer all materials from one plant to other plants?

Hi
To transfer stock in one step between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
hope it helps

How to transfer my iBooks from one ipad to other?

How to transfer my iBooks from one ipad to other?

Purchased iBooks can be redownloaded on all devices. If they are not from the iBookstore, connect your iPad to computer and 'transfer purchases'. They should now be transferred to iTunes (or iBooks if you are using Mavericks). You can then sync using the other iPad.

Move a circle from one place to other with a desired speed

My motive is to move a circle from one place to other with a
desired speed.
For that what should I do.
Thanks
rajakvk

Thanks for that post.
I am new to actionscript & actually I am developing my
first simple game in
flash. For that I need a function like pauseMovie(seconds). I
am planning to
call this function within another function. Also I expect
this function
pauseMovie(seconds) should use system clock to calculate the
time delay.
thanks
rajakvk
"sneakyimp" <[email protected]> wrote in
message
news:e3c92l$1ni$[email protected]..
> suppose that you have put your circle into a movie all
by itself. suppose
> further that the circle is perfectly centered in the
movie it lives in and
> that
> movie is on your stage with instance name myCircle and
its xposition is 5.
>
> put this actionscript in your main movie
>
> var circleSpeed:Number = 10;
> var destX:Number = 400;
> this.onEnterFrame = function() {
> myCircle._x += circleSpeed;
> if (myCircle._x >= destX ) {
> delete this.onEnterFrame;
> }
> }
>
>

Standard procedure to transfer Inventory Items from one Warehouse to other

Dear All,
Please let me know what is the standard procedure to be followed while transferring Inventory Items from one warehouse to other warehouse through SDK. Right now I am using sql statements to deduct and add the items to and from warehouse. Its not working properly. Please let me if any business object is provided by SAP to achieve this functionality.
Regards,
Noor Hussain

Hello Noor,
You can use stocktransfer object:
Private Sub PostStockTransfer()
        Dim oDoc As SAPbobsCOM.StockTransfer = oCompany.GetBusinessObject(BoObjectTypes.oStockTransfer)
        oDoc.DocDate = Date.Today()
        oDoc.FromWarehouse = "01"
        oDoc.Lines.ItemCode = "A0001"
        oDoc.Lines.WarehouseCode = "02"
        oDoc.Lines.Quantity = 10
        If oDoc.Add = 0 Then
            sbo_application.MessageBox("Stock transfer Issued")
        Else
            sbo_application.MessageBox(oCompany.GetLastErrorDescription)
        End If
    End Sub
Regards
János

Transfer of Inventory from One Plant to another with in the same company code

Hello All,
Can you please let us the possible option's for transfer of Inventory from one plant to another plant in different geographical location with in the same state.

PLANT TO PLANT TRANSFER IN THE DIFFERENT GEOGRAPHICAL LOCATION UNDER THE SAME COMPANY CODE
Assume - plant 1 - 1000 ; plant 2 - 2000.
From 1000 - 2000 u shall transfer the parts using 641 movement By creating a Stock transfer order with the following conditions.
1, Master & source list to be extended for both the plants vice versa. including accounting & excise view
2. Create an Sto po in ME21n for one time only /ME31N as scheduling agreement
3. Generate pick list and do Post goods issue in va02.
4. Create excise invoice & do the Gate entry in the other plant & stocks are up loaded.
5. In India excise rules are becoming stingent & you have to inform both the Excise ranges before starting the transactions

How to copy-paste frames from one document to other with there respective layers intact?

Hi All,
 I am facing an issue while copy paste frames from one document to other. I have a 3 frames in first documents each one on different layer. First document has 3 layers. The second document too have 3 layers , I am copying frames from first document to scrapdata using 'ICopyCmdData ' and 'kCopyCmdBoss'. I have 'Paste Remembers Layers' menu 'Checked' on Layer panel. I am using following function to copy frames to scrapdata.
bool16 copyStencilsFromTheTemplateDocumentIntoScrapData(PMString & templateFilePath)
 bool16 result = kFalse;
 do
 SDKLayoutHelper sdklhelp;
 PMString filePathItemsToBeCopiedFrom(templateFilePath); //("c:\\test\\aa.indt");
 IDFile templateIDFile(filePathItemsToBeCopiedFrom);
 UIDRef templateDocUIDRef = sdklhelp.OpenDocument(templateIDFile);
 if(templateDocUIDRef == UIDRef ::gNull)
 break;
 ErrorCode err = sdklhelp.OpenLayoutWindow(templateDocUIDRef);
 if(err == kFailure)
 break;
 InterfacePtr<IDocument> templatedoc(templateDocUIDRef,UseDefaultIID());
 if(templatedoc == nil)
 break;
 InterfacePtr<ISpreadList>templateSpreadUIDList(templatedoc,UseDefaultIID());
 if(templateSpreadUIDList == nil)
 break;
 IDataBase * templateDocDatabase = templateDocUIDRef.GetDataBase();
 if(templateDocDatabase == nil)
 break;
 UIDRef templateDocFirstSpreadUIDRef(templateDocDatabase, templateSpreadUIDList->GetNthSpreadUID(0));
 InterfacePtr<ISpread> templateSpread(templateDocFirstSpreadUIDRef, IID_ISPREAD);
 if(templateSpread == nil)
 break;
 UIDList templateFrameUIDList(templateDocDatabase);
 if(templateSpread->GetNthPageUID(0)== kInvalidUID)
 break;
 templateSpread->GetItemsOnPage(0,&templateFrameUIDList,kFalse,kTrue);
 InterfacePtr<ICommand> copyStencilsCMD(CmdUtils::CreateCommand(kCopyCmdBoss));
 if(copyStencilsCMD == nil)
 break;
 InterfacePtr<ICopyCmdData> cmdData(copyStencilsCMD, IID_ICOPYCMDDATA);
 if(cmdData == nil)
 break;
 // Copy cmd will own this list
 UIDList* listCopy = new UIDList(templateFrameUIDList);
 InterfacePtr<IClipboardController> clipboardController(gSession,UseDefaultIID());
 if(clipboardController == nil)
 break;
 ErrorCode status = clipboardController->PrepareForCopy();
 if(status == kFailure)
 break;
 InterfacePtr<IDataExchangeHandler> scrapHandler(clipboardController->QueryHandler(kPageItemFlavor));
 if(scrapHandler == nil)
 break;
 clipboardController->SetActiveScrapHandler(scrapHandler);
 InterfacePtr<IPageItemScrapData> scrapData(scrapHandler, UseDefaultIID());
 if(scrapData== nil)
 break;
 UIDRef parent = scrapData->GetRootNode();
 cmdData->Set(copyStencilsCMD, listCopy, parent, scrapHandler);
 if(templateFrameUIDList.Length() == 0)
 return kFalse;
 else
 status = CmdUtils::ProcessCommand(copyStencilsCMD);
 if(status != kFailure)
 result = kTrue;
 sdklhelp.CloseDocument(templateDocUIDRef,kFalse,K2::kSuppressUI, kFalse);
 }while(kFalse);
 return result;
After this I need to close first document. Now I am opening the second document from indt file which has same number of layers as first document. I am trying to paste frames from scrap data to second document using '' 'ICopyCmdData ' and 'kPasteCmdBoss' as shown in follwoing function
bool16 pasteTheItemsFromScrapDataOntoOpenDocument(UIDRef &documentDocUIDRef )
 bool16 result = kFalse;
 do
 InterfacePtr<IClipboardController> clipboardController(gSession,UseDefaultIID());
 if(clipboardController == nil)
 break;
 InterfacePtr<IDataExchangeHandler> scrapHandler(clipboardController->QueryHandler(kPageItemFlavor));
 if(scrapHandler == nil)
 break;
 InterfacePtr<IPageItemScrapData> scrapData(scrapHandler, UseDefaultIID());
 if(scrapData == nil)
 break;
 //This will give the list of items present on the scrap
 UIDList* scrapContents = scrapData->CreateUIDList();
 if (scrapContents->Length() >= 1)
 InterfacePtr<IDocument> dataToBeSprayedDocument(documentDocUIDRef,UseDefaultIID());
 if(dataToBeSprayedDocument == nil)
 break;
 InterfacePtr<ISpreadList>dataToBeSprayedDocumentSpreadList(dataToBeSprayedDocument,UseDef aultIID());
 if(dataToBeSprayedDocumentSpreadList == nil)
 break;
 IDataBase * dataToBeSprayedDocDatabase = documentDocUIDRef.GetDataBase();
 if(dataToBeSprayedDocDatabase == nil)
 break;
 UIDRef spreadUIDRef(dataToBeSprayedDocDatabase, dataToBeSprayedDocumentSpreadList->GetNthSpreadUID(0));
 SDKLayoutHelper sdklhelp;
 UIDRef parentLayerUIDRef = sdklhelp.GetSpreadLayerRef(spreadUIDRef);
 InterfacePtr<IPageItemScrapData> localScrapData(scrapHandler, UseDefaultIID());
 if(localScrapData == nil)
 break;
 if(parentLayerUIDRef.GetUID() == kInvalidUID)
 break;
 InterfacePtr<ICommand> pasteToClipBoardCMD (CmdUtils::CreateCommand(kPasteCmdBoss));
 if(pasteToClipBoardCMD == nil)
 break;
 InterfacePtr<ICopyCmdData> cmdData(pasteToClipBoardCMD, UseDefaultIID());
 if(cmdData == nil)
 break;
 if(scrapContents == nil)
 break;
 PMPoint offset(0.0, 0.0);
 cmdData->SetOffset(offset);
 cmdData->Set(pasteToClipBoardCMD, scrapContents, parentLayerUIDRef );
 ErrorCode status = CmdUtils::ProcessCommand(pasteToClipBoardCMD);
 if(status == kSuccess)
 CA("result = kTrue");
 result = kTrue;
 }//end if (scrapContents->Length() >= 1)
 }while(kFalse);
 return result;
 Here in above function its required to set Parent Layer UIDRef and because of this all frames are getting paste in one layer.
Is there any way we can paste frame in there respective layers?
 Also I need to work this code with CS4 server and desktop indesign.
Thanks in advance,
Rahul Dalvi

Try,
// dstDoc must be FrontDocument
InterfacePtr<ILayoutControlData> layoutData(Utils<ILayoutUIUtils>()->QueryFrontLayoutData());
InterfacePtr<ICommand> createMasterFromMasterCmd(CmdUtils::CreateCommand(kCreateMasterFromMasterCmdBoss));
createMasterFromMasterCmd->SetItemList(UIDList(srcMasterSpreadUIDRef));
InterfacePtr<ILayoutCmdData> layoutCmdData(createMasterFromMasterCmd, UseDefaultIID());
layoutCmdData->Set(::GetUIDRef(layoutData->GetDocument()), layoutData);
CmdUtils::ProcessCommand(createMasterFromMasterCmd);

Problem arise during transfer of material from one company code to other co

Dear CONS
While doing transfer from one company code to other company code by using movement type- 301 ( direct one step) we got one error message '' Field Bus. Area is a required field for G/L account JDPO 16020202
    Message no. F5808
Diagnosis
    The value for field "Bus. Area" in the interface to Financial Accounting
    is an initial value but you are required to make an entry in the field
    selection for G/L account "16020202" in company code "JDPO" linked to
    the field selection for posting key "21".
PL. SOLVE IT WHERE IS THE SETTING.

no, the system is not accepting the GL ACCT. as it is a balace sheet account. pl. help.
Edited by: nirupama swain on Sep 23, 2010 7:00 AM

Transfer of values from one recon to other recon account

Guru's,
I wanted to change the recon account of a vendor from 8050001 to 8050002.
Few entries are already posted in the vendor with the recon 8050001. I know that FAGL101 can be used to transfer the values from 8050001 to 8050002.
In the OBBW I did the configuration like this
Reconciliation account : 8050001
Adjustment Account : 9000014(Clearing account)
Please advise me if I need to do any other settings in Config and also tell me the procedure to run that in FAGL101.
Thanks in advance and points will defnitely be assigned.
Deepak

Hi,
I dont think you can update members. However, you can definitely send transactional data from one application to another using the DESTINATION_APP statement.
You have a good example available in BPC 320 on beforerange and afterrange.
Lets say that there are 5 columns in the report after the EVDRE expansion is done. Then in the beforerange or afterrange, you can use EVRNG function with a range of 5 cells. Lets say that you define EVRNG(J1:N1). In these cells, you can use formulas like EVSUM etc, and these formulas will be taken by the rows in your EVDRE report. If you define afterrange, then you will have additional row at the bottom. If you define beforerange, then you will have additional row at the top.
Hope this helps.

Transfer of values from one application to other

hi,
Can i update second plng application members from first application's default.lgf file.
Can i anyone give simple example on before range & after range options?
thanks,

Hi,
I dont think you can update members. However, you can definitely send transactional data from one application to another using the DESTINATION_APP statement.
You have a good example available in BPC 320 on beforerange and afterrange.
Lets say that there are 5 columns in the report after the EVDRE expansion is done. Then in the beforerange or afterrange, you can use EVRNG function with a range of 5 cells. Lets say that you define EVRNG(J1:N1). In these cells, you can use formulas like EVSUM etc, and these formulas will be taken by the rows in your EVDRE report. If you define afterrange, then you will have additional row at the bottom. If you define beforerange, then you will have additional row at the top.
Hope this helps.

Two user accounts - transfer e-mail from one to the other.

Hi, I set up a private account and would like to move mail from my main account into the in/out boxes of my private account - some files but not all.
How do I transfer between them?

What exactly do you want to transfer to the private user account? Do you want to transfer en entire mail account or some selected messages only? Do you want to remove them from the main account after they've been transferred? Do you want to share the same mail account between both user accounts?
More info on what exactly you want to do, please, since the best approach is not the same in all cases, and permission issues may need to be carefully taken care of.

Transfer ABAP Coding from one system to other.

Hi,
I have a ABAP package in a SAP system. Is there a easy way how I can transfer it to a other system in a completely different landscape.
Thanks for your help.
regards,
Mario

Hi,
Easy Steps
Include all the objects into a Transport Request no.
Provide the transport request no. to BASIS team & ask them to create a CONTROL & DATA file to import into another system.
In the target system, ask the BASIS Team to import those 2 files. Done !!
Laborious Steps
Goto SE38 & open the program, Click on EXPORT to file for all the programs & corresponding includes.
Then goto the target system & copy paste them.
Best regards,
Prashant

How to transfer the files from one server to another through pl/sql...?

I want to transfer all the files from source server with respective directory to designation server with respective directory (designation server - oracle reside server).
Is it possible to ftp from one server to another server(designation server - oracle reside server) through pl/sql. these two servers are independent & unix server.

No ... The package mentioned in
http://www.oracle-base.com/dba/miscellaneous/ftp.pks
this works for across the server i.e. transfer the files from one server to other (it is basically ftp) ..
So it is NOT correct that this code transfer the file between two location & with in server..

Transfer finished material from one unit to other with excise

Similar Messages

Maybe you are looking for