Transfer folders from outlook 2010 to hotmail server.

Hello,
I have homail account and one day I discovered that some folders are missing my emails messages and also the sent folder missed all emails message in years 2012 till 2014. ( i don't know if my account been hacked or i deleted them by mistake). fortunately,
 I used to have outlook 2010 in my laptop and desktop as well, my laptop was the same like hotmail online. but i was lucky because I didn't open my desktop computer for about a month, so I opened my desktop ( network cable removed to avoid sync)  and
found all missing emails and sent folder containing my missing messages, first I made a copy of myemail.pst to external hard disk, then I copied the sent folder to inside other folder in outlook 2010. and connected network cable and outlook synchronized to
hotmail server and now outlook 2010 in my desktop are the same like online but the folder i copied still there but not transferred to hotmail server ( I checked hotmail account using browser).
My question are how to transfer those folder data to hotmail server so i can access them from any where?
my email: [email protected]
Thanks,
Yasser

Pst-files can be connected via:
File-> Open-> Open Outlook Data File
Once connected, you can move the messages from one folder to another like you normally would.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Similar Messages

  • Transfer emails from outlook 2011 for mac to Outlook 2010 for windows

    Hi,
    I want to transfer emails from outlook 2011 for mac to outlook 2010 for windows. 
    Outlook 2011 exports mails only in olm format and there is no option to import olm files in outlook 2010.
     I can drag and drop emails from outlook 2011 to a finder folder which saves emails as eml files. How can import eml files into outlook 2010. 
    Please help

    Hi, 
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    Base on the research ,
    We can try the steps below to add the registry sub key. This will open all .eml files that are in the file system using Outlook, including *.eml attachments on messages in OE/WLM. Any replies will be sent
    using Outlook.
    ===========
    Important This section, method, or task contains steps that tell you how to modify the
    registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem
    occurs.
    1.Type
    regedit in the Search field on the Start menu or press
    Windows Key+ R and enter it in the Run command.
    2.Navigate to
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Microsoft Internet Mail Message WLMail\shell\open\command
    Or HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Microsoft Internet Mail Message\shell\open\command
    3. Change the command line (here its "C:\Program Files (x86)\Windows Live\Mail\wlmail.exe" /eml:%1)
    to the following line, exactly as shown below but correcting the path to Outlook.exe to match the path on your computer.
    "C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE" /eml "%1"
    Thanks for your understanding.
    Sincerely
    Rex Zhang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • I am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac.  I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email

    i am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac.  I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email.  Please help

    Post your question in the MS Mac forums since it's their software you're having issues with:
    http://answers.microsoft.com/en-us/mac

  • Outlook 2013 Signatures not showing up at all after transferring signatures from Outlook 2010

    Hello, 
    first time on here asking a question needing help.  I recently bought a new machine, windows 7 Pro and Outlook 2013. I successfully brought over my .pst files from my old machine running Outlook 2010, Windows 7. This was great and easy, got to keep
    all my settings, rules, and private folders for Outlook 2010 right into Outlook 2013.  Then it was time to move my signatures over, I did so with ease however when I went to my signatures in 2013, NOTHING was present, not 1 out of 30 signatures I have.
    I sure dont want to rewrite each one over again. I restarted, made sure the signatures were in the right spot in Outlook 2013. I also tried putting the signatures in another folder and importing them in, nothing.  What is the deal?  Can someone please
    tell me what I'm doing wrong or has anyone had this issue?  Please help. and thanks. 

    Just to check, so you went into C:\Users\%username%\AppData\Roaming\Microsoft\Signatures on your old machine and copied ALL of the files & folders you found there, and moved them over to the same folder location on your new machine.
    After doing that when you start Outlook and look in File, Options, Mail, Signatures you see nothing listed under "Select signature to edit" at all?

  • Acrobat 9 can´t send Emails from Outlook 2010 (x64)

    Greetings from Germany:
    I have a big problem with Acrobat Standard 9.4.1 and Outlook 2010 on Windows Server 2008 R2.
    Hope someone can help me with this Problem.
    Systeminfos::
    * Windows Server 2008 R2 x64
    * Acrobat Standard 9.4.1 x32
    * Outlook 2010 x64
    If I want send an Email from Acrobat with "Datei->An Email anhängen" (don´t know the english menü) I got that Error-Massage that my Outlook isn´t the Standard-Email-Programm. But it is - you can see on the Screenshot below.
    Every other Programm hasn´t such Problem with Outlook. mailto: Protocoll is working perfektly.
    Is there anyone who has solved that Problem or has any idea?
    Greetings from Germany
    Mario.M

    Sh**t... OK.. Thank you for that Info.
    Still try to use x32 Version.
    Greetings...

  • "changes to the public group membership cannot be saved" error from Outlook 2010 users, but no problem with Outlook 2003.

    We have the exact same issue as this but our groups are already universal security group and we still have problem:
    http://social.technet.microsoft.com/Forums/en-NZ/exchangesvrmigration/thread/2c953cb4-5411-4f72-beb9-6b4c16fd6685
    The distribution-groups were upgraded to Exchange 2010.  User A can update the group from Outlook 2003 or OWA 2010 but not from Outlook 2010.  Anyone know the solution?
    thanks

    Hi lilyl,
    For this issue, please refer to this document:
    How to Manage Groups that I already own in Exchange 2010?
    http://blogs.technet.com/b/exchange/archive/2009/11/18/3408844.aspx
    So what does the "Changes to the distribution list membership cannot be saved. You do not have sufficient permission to perform
    this operation on this object." error mean, when you are connecting to an Exchange 2010 server?
    It means Exchange 2010 is doing its job - as designed...
    Thanks,
    Evan
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Deleted messages from Outlook 2010 still appear on iPhone and OWA

    I have a very odd issue.  When I delete e-mails from Outlook 2010, they are deleted fine.  However, when I check my mail on my iPhone, or on the Outlook Web Access, the e-mail is still there.  I'm not sure what is going on.  Our e-mail
    is set up on an Exchange Server.  Is there a setting in Outlook that is not deleting the e-mail from the server?
    Thanks

    Hi Joseph,
    Could the emails be deleted via OWA and not displaying in Outlook?
    Please try to create a new profile and set it to online mode, then test the issue and see if it still appears in OWA.
    If it doesn’t work, I’d recommend you contact with Exchange admin for further troubleshooting.
    Regards,
    Rebecca
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • What is the best practice to move from Outlook 2010 to icloud. I want to sync primarily contacts and calendars.

    I would like to move from Outlook 2010 (originally on Exchange) to icloud, however I read lots of bad experiences about this.  Has anyone developed a good practice procedure for this?  I primarily want to sync Outlook 2010 calendar and contacts with a cloud service and my iphone.  I currently use a Dell latitude PC, outlook 2010, have upgraded to iOS 5 on an iphone 3GS (soon to be an 4GS).

    I was trying to find the answer to this myself.
    I found it.
    Use iCloud Control Panel for Windows: http://support.apple.com/kb/DL1455
    I found that you don't need to create separate iCloud contact and calendar folders before installing this, it does that for you (in fact, you can't choose what these new folders are called, or where they go, but I guess you're unlikely to have anything else in your Outlook named "iCloud" before you start.)
    Mike

  • Manually Move Public Folders from Exchange 2010 to 2013

    Hi all,
    I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed.
    The final error is the following:
    FailureCode                      : -2146233088
    FailureType                      : SourceMailboxAlreadyBeingMovedPermanentException
    FailureSide                      :
    Message                          : Error: Couldn't switch the mailbox into Sync Source mode.
                                       This could be because of one of the following reasons:
                                         Another administrator is currently moving
    the mailbox.
                                         The mailbox is locked.
                                         The Microsoft Exchange Mailbox Replication
    service (MRS) doesn't have the correct
                                       permissions.
                                         Network errors are preventing MRS from cleanly
    closing its session with the
                                       Mailbox server. If this is the case, MRS may continue
    to encounter this error for
                                       up to 2 hours - this duration is controlled by the TCP
    KeepAlive settings on the
                                       Mailbox server.
                                       Wait for the mailbox to be released before attempting
    to move this mailbox again.
    So, after seeing this I started to monitoring all process and I realized that after creating hierarchy the process start to fail and keep in StalledDueMailboxlock status, and the error is:
    FailureCode                      :
    FailureType                      :
    FailureSide                      :
    Message                          : Informational: The request has been temporarily postponed because the mailbox is
                                       locked. The Microsoft Exchange Mailbox Replication service
    will attempt to continue
                                       processing the request after 2/14/2015 12:38:20 PM.
    Finally, digging more into reports of migration I  found this:
    MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to open entry ID. (hr=0x80040115, ec=6)_x000A_Diagnostic context:_x000A_ Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=73]_x000A_ Lid: 44583 EMSMDBMT.EcDoRpcExt2
    exception [rpc_status=0x6][latency=0]_x000A_ Lid: 62184 _x000A_ Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a_x000A_ Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 51452_x000A_ Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0415-02-14T14:25:40.9210000Z_x000A_
    Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2_x000A_ Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 6_x000A_ Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1741_x000A_ Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0_x000A_ Lid: 11672 dwParam:
    0x0 Msg: EEInfo: NumberOfParameters: 0_x000A_ Lid: 23260 Win32Error: 0x6_x000A_ Lid: 61553 StoreEc: 0x80040115_x000A_ Lid: 52176 ClientVersion: 15.0.1044.25_x000A_ Lid: 50032 ServerVersion: 14.3.181.6_x000A_ Lid: 50128 _x000A_ Lid: 50288 _x000A_ Lid: 23354
    StoreEc: 0x80040115_x000A_ Lid: 25913 _x000A_ Lid: 21817 ROP Failure: 0x80040115_x000A_ Lid: 22894 _x000A_ Lid: 24942 StoreEc: 0x80040115
    So, would like to know if exist any procedure to migrate/move my Public Folders from Exchange 2010 to 2013 manually, something like Export/Import.
    Regards!

    What script and process you are running to migrate the Public Folders?
    And what do you mean by Manually?
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.comTwitter:
    LinkedIn:
    Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Error opening PDF's from internet and from outlook 2010

    I am using Server 2012 R2 and receive an error when trying to open a PDF from Outlook 2010 or when I try to download a PDF and open it from the internet. However, if the PDF is one that opens inside the web browser, it works just fine. Using IE 11 The account does have access, i have also tried with a domain admin account. Lastly, i have tried to uninstall and re install with no luck. Any ideas?
    I receive:

    I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

  • Trouble sending emails from outlook 2010 to Ipad as excel attachments although.  One one recipent can not open the other can!!?? Help

    Please Help!!!
    When sending e-mails from outlook 2010 with excel attachements the recipents can view no problems.  However, a new member has joined but cant read the attachements?
    I'm lost!!!
    Please help
    Scott

    Hi there,
    Can you import the PST file and find the sent items in another Outlook for Windows? If the issue only occurs in Outlook for MAC, I'd suggest you pose the question in the forums below:
    Office for MAC
    http://www.microsoft.com/mac/support
    Support for Microsoft Office for Mac 2011 and 2008
    http://support.microsoft.com/gp/cp_macoffice2008_master
    How to obtain support for Microsoft Outlook for Mac 2011 connectivity problems with Exchange Server
    http://support.microsoft.com/kb/2353366
    Your understanding would be appreciated.
    Fiona Liao
    TechNet Community Support

  • Search Folders in Outlook 2010

    Hi,
    Is it possible to create custom search folders for Outlook 2010 from Exchange 2010?
    Thanks
    Anil Chauhan

    Hi Anil Chauhan,
    Based on my knowledge, it is possible to create search folder using EWS.
    About how to create search folder using EWS, I recommend you ask in Exchange Development forum which is staffed by more experts specializing in this kind of problems. You can get better help there. Thanks for understanding.
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
    Besides, here is a related article for your reference.
    http://gsexdev.blogspot.com/2011/09/create-search-folder-using-ews-managed.html
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software
    or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Belinda Ma
    TechNet Community Support

  • Transfer email from outlook to mac

    Hy!
    I need to transfer all my email from Outlook 2010 in my new Apple MacBook Air to use correctly mail.
    Someone can explain the process to guide me in this passage?
    Thanks a lot for your collaboration.
    Gianluc@

    Hi Gianluc@74,
    If you are having issues migrating to Mail on OS X, you may find the following article helpful:
    Mac OS X Mail: How to transfer downloaded email from a non-Mac computer
    http://support.apple.com/kb/ht1534
    Regards,
    - Brenden

  • TS3899 Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone

    Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone.

    The meeting invite is being sent from a Computer through the Outlook 2010 Email Client. Both Computer and Outlook 2010 are set to Eastern Time. The OWA (Outlook Web Access) for the 2007 account is set to Eastern Time. The Outlook 2010 Email Client is connected to an Exchange 2007 account and the Exchange server for the exchange 2007 account is located in Chicago (Central Time) and is set to Central Time. When the meeting invite is sent from the Outlook 2010 Client the recipient receives the invite on his/her iPhone(set and located in the Eastern Time Zone) and a mime-attachment.ics file is attached to the meeting invite email. There is no info displayed in the subject line or message body. If the iPhone user opens the attachment it displays the meeting date and time and any other info that was sent from Outlook. The Outlook 2010 user sets the meeting for 10:00am to 11:00am. when the meeting invite mime-attachment.ics file is opened on the iPhone the meeting is displayed as 9:00am to 10:00am. if the iPhone user adds the ics file to his/her calendar it adds a meeting event that is scheduled 1 hour earlier than it is supposed to be. I had the iPhone user to set Time Zone support on and off and there is no change.

  • How can I transfer contacts from Outlook on a PC running XP to my new iPad? iPad, PC running XP

    How can I transfer contacts from Outlook on a PC running XP to my new iPad?
    iPad, PC running XP

    Did you select them to sync in the sync preferences of iTunes?
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Info Tab on the right.
    Scroll down to Sync Contacts
    Select the contacts from Outlook
    Click on the Sync Contacts heading
    Click on Apply in the lower right corner of iTunes

Maybe you are looking for

  • X200 External Monitor -- In High Resolution​, Tablet Pen Won't Work

    I have an X200 Tablet running Windows 7 and need everything I write on the tablet with the digital pen to be simultaneously visible on an external monitor.  The problem is that when using both monitors simultaneously, the X200 will only display on th

  • Import problems iPhone 4 to iPhoto 6

    Hey there, Have a new iPhone and am trying to import photos and video I've taken. At first, iPhoto 6 was happy to import both photos and video, then it decided not to, then yes, then no... All these files have been taken on the iPhone camera, so I do

  • Slow Queries After Upgrade from 9i to 11g

    We are in the process of upgrading several of our databases from 9i to 11g. I am doing some performance testing using SQL developer and I have found that some queries are executed much faster on 9i than 11g. For example, the following query ran in 0.

  • SquirrelMail LDAP address book error

    Hello all - over the weekend I upgraded my OD Master/LDAP server and my Mail server (two separate boxes) to v10.5.5 of OS X server, and now my users are reporting that they can no longer use our LDAP-integrated address book in SquirrelMail... I tried

  • PS + LR subscription

    i am currently subscribed to the single app version of PS and would like to subscribe to the PS + LR offer for $10/mo. i received an email yesterday for this offer but don't how to cancel my current subscription and "re"subscribe.