Transfer from COmpany code to another Central Person..
My client req is to transfer one Employee from company code to another COmpany COde
COmpany COde Number Range
HIL1 1000 - 50000
HIL2 100000 - 200000
Transfer EMployee 1111 from Company COde HIL1 to HIL2. SInce it is not possible to change his Number from 1111 to 100000 series it is not possible, I suggested to Seprate that employee from HIL1 and rehire in HIL. Now client wants all thta master data to be copied into HIL2 company code. Please adise how to handle this...
Thanks
Ravi.
Hi SAPHCM,
You are seeing some of the problems when you use Personnel Number to indicate something other than a specific individual. You should not separate blocks of PERNRs by Company Code or any other grouping for the reasons you are now seeing - people get tranferred and the PERNR should not change. The Organizational Assignment infotype contains all the fields necessary to separate out employees - PERNR should not be used for this.
If the Company Codes are in different countries, you can use the action "Cross Country Transfer". This will retain all the personal data infotypes for an employee while it terminates him from one country and hires him into the other. A better way to handle cross country transfers is "Global Employment". If you are in 4.7 and above you can activate this and it will allow you to have more than one personnel number for an employee. Here you use CP-Central Person to identify the employee.
Again, remove the separate blocks of numbers from being assigned by Company Code and your situation would be resolved by a simple transfer action.
Paul
Similar Messages
-
Asset transfer from company code to company code
Hi ,
I want to transfer assets from one company code located in India to another company code located in the US. The existing configuration is as under.
Both the the company codes share the same "chart of accoutns" but the "chart of depreicaiton" and the "controlling areas" of the above two company codes are different.
The client wants to transfer the assets at net book value.
In the above scenario (1) is it possible to transfer the assets.
(2) shall we have identical depreciation areas in both COD's
(3) what would be transaction variant should we use? and the its mapping the transaction types in "Define Transfer Variants" node?
Moderator: Please, avoid asking basic questionsDear,
Please check: Re: asset transfer within company code from one plant to another using STO
Re: how to transfer an asset from one plant to another plant within comp code
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/asset-transfer-237416
Regards,
Syed Hussain. -
Material transfer one company code to another company code
Dear All,
I want to transfer some items to one company code to another company code. Please suggest me the process.
Regards
Vimal
Note : Please search forum before posting.
Edited by: Jeyakanthan A on Dec 26, 2011 1:25 AMThis has been discussed on this forum million times...please search on this forum before asking generic query....
inter company code material transfer -
Amount conversion from company code to another currency?
Hi all,
I want to develop a report report in which I need to convert the amount from company code currency to foreign currency.
but before that should it be converted from company code currency to group currency which is standardized one?
means suppose I have company code currency GBP , grp currency USD and user selects EUR for amount currency.
then should I go like this: GBP to USD then USD to EUR.
I am using the FM : CONVERT_AMOUNT_TO_CURRENCY.
rgds,
MadhuriHi,
Check out this thread...
Currency Conversion
Regards,
Lydia -
Transfer an employee from one company code to another
Hello
How to transfer an employee from one company code to another? If both the company codes are in same client.
Thanks
YashHi,
Position is interlinked with Personal Area and Personal Sub Area. Through PA40 you can use Action Change in Position there you can Assign P.No to Position and in which personal area and sub area P.No belongs to.
I hope you know how Enterprise Structure is integrated with Org. Structure.
All the Best.
Kalyani -
Transfer Customer Master records from one company code to another company.
hi ,
working on a rollout project ,
needed to transfer Customer Master records from one company code to another company code.
is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
thanks in advance.
rahul
Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AMHi,
I think you should ask this question in functional consultant forum.
Thanks, -
Need to transfer more than 150 employees from one company code to another company code
Dear Sir/Madam,
I am new in SAP HCM . We need to transfer more than 150 employees from one company code to another company code due to some business requirement. Please suggest the process of transfer from one company code to another company code considering the other element like gratuity , leave entitlement, Bonus , Exgratia etc.
Your quick response will be highly appreciated.
Thanks & regards,
Babuna Ray
Mob:- 9007295305
[email protected]Dear,
do not transfer employee from one company code to another issues are as under.
1. Employees Form 16 you will get wrong value as per I Tax law because of company is having different PAN & TAN.
2. Form 24 Q annual return data will not get properly/easily from SAP because of form 24 Q will run on Payroll area base/ company code base
3. PF number is different for these 2 company codes then you are unable to submit annual return.
4. If employee will get hike after the transfer case then system will post expenses period wise means if employee is having 2 different cost center related 2 different company codes posting will done as per this scenario is it accepted to Account Depatment? it is reflected in FICO through KSBB how can they manage expenditure which is related to previous month?
Like this many points are there you have to study it and then suggest to your client.
Regards
Subhedar
9158881202 -
Transferring an Employee from one Company Code to Another Company Code
Dear All,
we are implementing the HR Implementation for the group of Hospitals, each hospital being an Individual Legal entity, but there is a requirement, where in there is a possibility that the employee may be transferred from one Hospital to other on a short term basis or on a long term basis, and as long as the Employee stays in that transferred place, his salary is to be paid from that particular Hospital,
As per my understanding, we have to run the seperation action and then go for a hiring action in the new company,,, but this wouldnt solve the purpose if the employee works for 10 days in a month in one Hospital and the rest in the Other Hospital...
I have come across various posts on sdn regarding the same issue that it is possible, but i didn't find the end result for this one,I would request you to provide me with your inputs on this one.
Regards,
BharadwajHi ,, I am aware that we need to execute a transfer action, but how can we transfer an employee from one company code to another??? let me explain you with my scenario here....
HOSPITAL-1 : XYZ1 ( Company Code)
HOSPITAL-2 : XYZ2( Company Code)
Hospital 1 (XYZ1) and 2(XYZ2) belong to the XYZ Group of Companies
both these hospitals are separate legal entities
an Employee "A" is working in a Hospital 1 ( XYZ1) from 1st of a month till 10th and from 11th onwards he is working in Hospital2(XYZ2).
if i want to transfer an employee internally from one Personnel Area to another Personnel area or from one org unit to other org unit then i can do it through transfer actions, but how am i supposed to do a transfer action in between two company codes? -
Copy data from 1 company code to another company code
hi friends
my client has 3 company codes but now they want to close one company code for that they want to copy data from one company code to another company code after copying the data they want to delete that company code
i am fresher to sap(fico) please tell me the solution for this,
1) what is the process of copy from one company code data to another
2) what is rules and integrations for thatCompany Codes are the individual identity and we have to give accounting details (Balance Sheet and Profit and Loss account) to statutory bodies so deletion of Company code or coping data from one to another is not posible and not suggested too.
Expalin your client to block all the transaction in one company code and transfer all the closing balance as per trail balance, open Purchase orders, open Sales orders, inventory valuation to another company code and start doing trasaction there.
This is the only solution as per my knowledge.
Uttam -
Transferring of employee from One Company Code to Another company code
Hi Friends,
There is already configured SAP HR solution for say 1000 Company code, Now I am implementing for another company code 2000, Client has requirement to transfer employees from 1000 ( company code ) to 2000 ( company code ).
Country is UAE (Gratuity / Pension legal calculation)
According to me as company code is an legal entity, We need to resign the emplyee in one company code and hire him in another company code. What you say? OR any best SAP Preactice ?
Thanks
JayHello Jay,
You need to have different PAs for different company codes and assign those PAs to the respective company codes (check IMG: Enterprise Structure -> Assignment -> Human Resources Management -> Assignment of Personnel Area to Company Code).
Now you need to run action (transfer or org reassignment) wherein you will change the existing PA (belonging to one company code) to another PA (belonging to different company code). This way the employee master in IT 0001 will show different company code from the date of such action
Goto PA40, choose Transfer actionChange Info group
0001 COP
0006 COP
0009 COP
0007 INSS
0008 COP
0014 COP
0015 COP
0588 COP
OR
Perform the action Organizational reassignment in PA40 for that employee and change the personnel area. by changing the personnel area the company code will cahnge automatically
regards, -
Employee transferred from one company code to another company code
Hi
I have an issue.
If an employee is transfered from one company code to another company code.
how can we transfer the master data and payroll data of the employee from existing company code to new company code.
Regards
Vish1.Try with this report RPUP0001 (read the documentation )
2.The other option would be LSMW
But you havent say how the payroll Should process from the persent period with changed company code or for previous periods with pervious company code -
Posting Error when Employee Transferred from 1 Company Code to another
Dear All,
I am working on 2 company codes and I am facing a problem in Payroll posting to finance when employees of 1 company code are transferred to the other company code if there is Retro Accounting for the employee.
For Eg. 1 employee is transferred from Company Code 1000 to Company Code 2000 in the month of September. But the employee has taken 3 days of unpaid leave in August and the same was not updated in the system in August before the payroll of August. So in september when the payroll is processed, retro accouting happens and the amount for 3 days is deducted in september.
But when I am making a posting to finance it is giving me Error in posting as "Posting balance is not cleared (Period 08 / 2011 P)".
I have activated the PPMOD Feature and have done all the necessary configurations.
Thanks in Advance.
Regards,
VijayDear Vijay...
Basically its better to rehire the employee in other company code rather than to transfer from one company code to another. because every company code has its own financial structure and error is cuming due to this.
Now u have to check few things...
1. Ask the Costing (CO) team to open the entries in last period 08/2011 and then check the posting.
2. If error will not resolve then check the wagetype permisibility for Personnel Areas and Employee Groups.
3. If error is still there, then ask the finanacial team to change the profit centers of those cost center which are related to that particular employees.
I hope ur issue will be resolved within these three solutions.
Regards, -
Copy Master Datas in FICo from 1 Company Code to Another --- Very Urgent
Hi Peers
I want to copy all the FI & CO master Data like G/L a/cs , Vendor Master, Customer Master, Cost Centers, Cost Elements, Commitment Items, Funds Center & Assets from one company code to another company code. Both the company codes will have same Chart of accounts. Is there any t.Code by which i can just extend these masters to my company code. Plz help. its very Urgent.
Expecting a reply ASAP.
Regards
RajaramHi
In customization, Assign Chart of A/cs to company code there u will get the path for copying one company code to another company GL Masters.
And also the CCtrs u already assign to the first company code. Once u copy the data for one company to another automatically it will copy to another company code.
Hope this is useful to u.
Shammi -
Stock transfer between one company code to another
How to configure stock transfer between one company code to another.
Please send me the step by step procedure ASAP.Hi
check following steps
1. Create Customer in Supplying Plant.
2. Create Vendor in Receiving Plant (In Purchasing View, Menu-Extras-Add Purchasing Data)
3. IMG-MM-Purchasing-PO-Setup STO-Define Shipping data for Plants (Assg Cust No in Receiving Plant)
4. IMG-MM-Purchasing-PO-Setup STO-Assgn Doc Typ, One-Step Proc Und Del Tol
5.IMG-Log.Execution-Shipping-Basic Shipp Func-Shipp Pt & Goods Recei Pt Det
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
also give ur mail ID will send doc
Vishal...
reward if usefull -
PO Conversion from once company code to another company code
Hello All,
Can any one help me the process or steps to convert Open PO's from one company code to another company code?
If anyone have done something like this in the past then please share your experience or the process steps you have followed.
Thank you very much for your help and support
Ex:
company code: ABC
Plant: 123
Sloc: AS12
PO # : ABC1
ABC2
convert above PO to,
Company code: XYZ
Plant: 999
Sloc: AS12
Edited by: Thil Nayak on Aug 31, 2011 5:35 PMThe important part is not really in LSMW, it is before in analyzing which POs you want migrate automatically and which manually.
you might have POs that are partially done, e.g. have partial receipts, so you only need to migrate the remaining quantity only.
And here I usually decide based on the volume of such POs whether I do them as well with LSMW (which adds more complexity to either source file or LSMW) or if they will be done manually.
you have to erase the PR numbers, otherwise SAP will validate whether these numbers exists for your new plant.
you have to think about how you prepare the source file, whether you do a download from various table and put it together in Excel, or if you do it totally different way. I usually setup a ALE scenario and send the old data via ALE IDOC process into a file on the applicaton server, then I use this file with thousands of IDOCs as my source, so I dont need to extract data from a table myself.
Maybe you are looking for
-
2.33 intel core duo and G5 2.0 dual desk
Hi i am using a g5 2.0 dual processer with 3.5. ram with lots of synths may b all possible softwares including viena.. i want to buy a laptop 2.33 macbook intel core 2 duo and work on the laptop with the same logic setion with all the synths at some
-
Business Partner Role and Business Partner Grouping
Hello Everybody! Business Partner Role and Business Partner Grouping. Which correlation ist between this attributes existing. In which table are this infos stored, In order create I can use e.g. BUPA_CREATE_FROM_DATA but how is the way inversely. Su
-
Hi all, I'm trying to create a JVM from within a windows dlln (vc++6) I'm writing. In the DllMain's DLL_PROCESS_ATTACH method of my dll I call a method called createJavaVM, this method creates the virtual machine. Using that method in a simple consol
-
*82 in phone number causes phone not to recognize incoming callers
With my old phone, I put *82 in some numbers to allow only those people to see it was me calling. When they called, the phone was smart enough to ignore the *82 and resolve their name. With the iPhone it seems that if I have *82 in a phone number, it
-
Launch apple store from AIR app (IOS)
Hi, How I could launch the apple store from my flex AIR app? I need the tipical "go to app store" button... Thanks! Jorge