Transfer from unrestricted to quality

Dear Gurus,
I have a scenario that sometimse I need to transfer a certain quantity in the unrestricted stock to quality inspection stock and perform inspection to it.
I tried to transfer the quantity from transaction MIGO, but it didn't allow as quality is active on the material.
Keep in mind that this is not the case of recurring inspection, it is random.
How can I handle this issue?
Regards,
MaX

Hi
I will try to answer your question based on the little information provided by you.
As you have posted the stock already to the Unrestricted you can reverse the stock to quality using OSS note 175842.
Again if you do not want to reverse the inspection stock posting and ur business scenario allows you to create new inspection lot then you can use stock transfer inspection. Transfer posting ( Storage location to storage location) but create a Z movement type so that it will not effect your daily storage location transfers. Activate material for 08 Stock transfer inspection or new variant of 08, in QM view.
Post the material using MIGO
Regards,
Nitin

Similar Messages

Automatically Transfer from unrestricted to quality after oneyear

Hi expert
i have requirement that after every one year from the GRN i want the materiel goes to quality check automatically. now i am doing manually by Movement type 322.
regard
nabil

QA07 can do this job. Precondition is either a shelf life date or a recurring inspection method in material master

Posting change from Unrestricted to Quality inspection

Hi Experts,
Help please.
I am trying to do posting chnage using MB1B transaction (322 Mvt type). But I'am having an error : "Change the inspection stock of material XXXX in QM only".
I do not know what this error means, Please someone help me.
Initially, the material was received in "Quality inspection", but it was already been moved to Unrestricted. But now, we are having problem in doing posting change from Unrestricted to Quality inspection.

as the collegues already said. when QM is active you cannot do manual QM transfer postings.
But you can do a MIGO with 102, to cancel the receipt. (you have to change the proposed quality status in item detail from Quality to unrestricted before you can do this)
Then you can receive it again the standard way. It will again go to Qualtity inspection and create an inspection lot .

Stock Reversal - From Unrestricted to Quality

Hi All,
Our scenario is as follows,
Inspection takes place for a Inward material (101). Once the UD is given stock is moved from Quality Inspection to Un restricted.
Then the Raw Material is issued to Production. Some defects are observed at production Stage and they are returning it to Quality. How this can be done in SAP. I have tried to Transfer Posting (321 to 323), System says, as the Material is activated for QM Inspection, this is not possible.
Pease guide me, how to move the Material back from Unrestricted to Quality Inspection.
Regards
Sam

Hello,
You can choose a line rejection process for this. Please activate 08 inspection type for the material.
First pls do 344 movement type (MB1B) and post the material from unrestricted to block.
Then do 349 movement type for posting the material to quality from Block.
Lot will get created and you can reject the material by giving the UD and posting it to return delivery.
Please make sure that quality is active for 349 movement type in SPRO > Inspection for good movement.
Please revert back for any more doubts.
Regards
gajesh

Movement of material from Unrestricted to Quality at sub contractor

Hi Expert,
I am looking for a way to move stock from Unrestricted to Quality for stock that is stored at a vendor (sub contractor)?
Have you got any advice?

Hi Anders,
Is your wish to move your goods from unrestricted special stock at SC vendor to QI special stock at SC vendor?
In this case you may have solution, please check transaction MB1B + relevant movement type (sorrowfully I cannot check 'cause I have no access to SAP now). Please take care of choosing proper movement type with special stock category 'O'.
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b909643ad11d189410000e829fbbd/frameset.htm
BR
Csaba

Posting from unrestricted to quality

Dear Gurus,
For some reasons, I need to post batches from unrestricted to quality inspection, keep in mind that QM is active. How can I make this?
Regards,
MaX

I Presume here Baches means Batches & not the Inspection lot. If yes then you can go to QA32 & put the Batch into restricted.This can be done through MSC2n also.
This can generate 341 mvt in the background.
If Only inspection lot then you can follow the root of 08 inspection type with MB1B....

Transfer Posting Unrestricted to Quality Stock

Hello friends,
I need to move the stock from Unrestricted to Quality Stock. I dont want to use Movt. 322 as it is reversal of 321. Is there any other way out?
Regards,
Navin

Hi Navin
322 mvt is the better option. 322 is not only reversal of 321. also this will be used in many occassions to bring stock from Un restricted to Quality Inspection. for example in recurring inspection (09 inspection type), material will move from Unrestricted to Quality Inspection with 322 mvt type only.
Can you please explain why you dont want to use this mvt type tp bring stock to Quality Inspection?
regards
Srinivas

Transfer posting from Unrestricted to Quality using QM

Hi Team,
Im not expert in QM, I need your help.
Here is using the module QM for quality inspection, I have the following situation:
A GR 101 was done into a PO.
Quality release the material and stock moved from Quality to Unrestricted
The detect that the Qty of pieces are not correct and now they want to reverse the GR, they tried but was not possible. Error:; Deficit of SL Stck.in qual.insp 972 PCE : 004933000301 7601 9001
So What step I need to follow in order to move the inventory from unresticted to Quality.
I already try with Mov 322 but get this message: Change the inspection stock of material xxx in QM only

If you have QM then you cannot post stock with MM movement into Q-status.
But you can reverse the GR in MIGO, but not with cancel in reference to material document. You have to do a Goods receipt to purchase order but using then movement type 102 for cancellation. Then in the detail tab you can change the quality status from the proposed quality status to unrstricted status.

HR Master Transfer from PRD to Quality

Hi All,
I have a issue in PRD for an employee in PRD.
Hence to analyse and test the same, I need to transfer/clone all his HR master data of same employee from PRD to QUality.
Is there anyway I can achieve this?????

HI,
1. There is a Cloning tool available for such thing called Clone and Test from Accenture. You can clone the data employee data from one system to another.
2. However if there is a small set of updations, you can do that manually in QA.
Hope this helps.
Param

Stock transfer from Unrestricted Stock to Sales Order Stock

Hi,
We have one sceanrio where we are transferring Unrestricted Stock to Sales Order Stcok through TC: MB1B and movement type - 413.
In this the material consumption account of the material hit is assigned in GBB/VBR. Also I have made this GL as cost element.
But during this Stock transfer the system is asking for CO- Object. I dont wantt to have any CO-Object here.
How can we resolve this.
Or is there any other Transaction event key in OBYC that needs to be maintained.
Please help.
Regards
Kami

hi
try with 413 E movement type

HP Photosmart C5580 All-in-One- Photo Transfer from Scan- Color Quality

I am a quilter. I have printed a photo (from a scan) onto fabric. I purchased the fabric made for this specific purpose. However, the color is off. The actual photo and scan have more brown tones whereas the transfered photo has a more purple tone (rather like the tone you get when you are out of ink). I have brand new ink cartidges installed. #75 tri-color and #99 photo. Should I be using something else?

Hi Thisisridiculou,
I hate to hear you are having print quality issues. Please be aware fabric printing is not supported for this unit. Please view the chart below to identify supported media types. If you are experiencing print quality issues with supported media types please complete the steps located at the following link. Click Here Please carefully review the note below regarding non-supported media types. You may be able to improve quality by adding a generic driver. Here is a link that will provide the steps for that. Click Here
Note: Use of non-supported media types can cause poor print quality as well as damage to the internal hardware components of unit. HP and I are not responsible for damage caused by unsupported media type usage.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

QM - WM : How to change stock from Unrestricted to Quality

Hello,
I am working for the first time on a Project with both WM and QM and facing an issue : for a certain material, there was some stock in Quality - I released it using a Posting change via LQ02 Transaction and movement 321 (worked fine in WM and IM)
I am now able to create the QM view to activate QM in case of customer returns...
I now would like to put back this stock to Quality : I am using again LQ02 with movement 322 as IM and WM Movements have been linked in customizing...It doesn't work as I receive the message : *u201CChange the inspection stock of material *** in QM onlyu201D.*
Can any one explain me how to proceed to put back this stock to Quality as I only removed it to create the missing QM view and activate the inspection type.
I have no clue about QM but I checked in Customizing and it seems movemnet 322 is not relevant for QM so I don't understand this error message....
Thanks,
KAK

the following thread may help u:
INSPECTION LOT
regards,
indranil

IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
Prashant

Hi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore

Revaluation in stock transfer to Sales Order stock from unrestricted

User is trying to do a stock transfer posting from unrestricted to Sales order stock. Now the system is throwing an error saying that account setting has not been done for UMB (OBYC setting). I have given the GL for this UMB transaction type in OBYC> UMB is for posting Gain/Loss from revaluation.
I dont understand how a revauation happens when we transfer stock from unrestricted to Sales Order Stock ? What is the purpose of that in our scenario, could you please explain.

Hi:
Normally it should not happen in case of stock transfer posting. Please check the movement type settings for valuation class of your material and see if the transaction type UMB has been set against valuation class in OMJJ...Account grouping.
Hope it will help you.
Regards

How to transfer special stock type ''O'' from unrestricted into blocked

Hello!
I would like to finD out if there is any movement type which would move sprecial stock ''O'' (provided for Vendor) from unrestricted to blocked? The stock should still belong to vendor afterthat.
We want to move the quantity of some batches into ststus blocked as we do not want them to be used (bad quality) - the are physicaly at vendor. We move this unavailable materials from vendor to our plant every 2-3 months and would need to have accurate information about unrestricted stock.
Many thanks in advance for your answer.

Hi ,
For the stock of material provided to vendors, the available stock types are unrestricted-use stock and stock in quality inspection. So you can NOT change the stock type to blocked.
I suggest you create a special storage location for this purpose.
Best regards,
CM

Transfer from unrestricted to quality

Similar Messages

Maybe you are looking for