Transfer from windows to mac

i recently bought a macbook and i tried to connect my ipod to my macbook but it freezed and won't do anything.
i previously used windows xp to update my ipod.
any clue?

I didn't have that problem when plugging my windows ipod into my new macbook, have you tried all of your usb ports?

Similar Messages

  • How can i transfer from windows to mac with my catalogue ?

    hello, how is the best way to transfer my catalogue from windows (8.1) to mac (yosemite) ?
    thx for your help.
    best regards from germany
    oliver

    Is Apple compatible with Microsoft Office?
    Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
    How can I transport from Windows to Mac?
    You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
    If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
    The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
    Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

  • Data transfer from Windows to Mac

    Hi
    My first post so be gentle!!
    Just about to take delivery of my new 27" Mac after converting from the dark side!
    I currently have all of my data on a NTFS external hard drive (about 100GB) and want to transfer it over to my new Mac.
    Can someone point me in the right direction on how to do this?
    Many thanks

    Man what a reduculous question, how obserd...
    I'm only kiddin'... I'm trying to be gentle!
    Let me start over!
    Hello "Welsh Mac"
    Welcome to the Apple Discussions.
    Macs OS (OSX) will read NTFS partitions just fine, it just won't natively write to NTFS partitions with out 3rd party software. If you're simply trying to transfer files from the NTFS partition, then all you need is to place the NTFS drive into an external USB or Firwire enclosure, attach it to the iMac then drag the files from the external drive to the internal drive. Then you can reformat the old drive (if you wish) to OSX extended and use it as OSX backup drive or an external storage for the iMac.
    Congrads on your new Mac, be sure to post if you have any questions. This forum will always be gentle...

  • Photshop CS5 transfer from windows to Mac

    I run Photoshop Extended cs5 on Windows. Can use this same product on my MacBook I just purchased or do I need to purchase a whole new version of Adobe Photoshop?

    Creative Suite 6
    Click Buy
    I want to buy: Upgrade
    I own: Photoshop CS5 Extended
    Platform: Mac
    Complete your purchase.

  • Transfer from pc to mac. code number is on the mac but not appearing on the pc

    Using migration assistant to transfer from windows to mac. Almost there but code is appearing on mac but not on the pc. have tried a number of times. any ideas please?

    The sharename would refer to the shared folder, directory, or drive on the server side. Perhaps the following will be more helpful:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1161.html
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1163.html
    http://joelshoemaker.com/computer/mac/macfilesharing.html

  • How can I transfer my photoshop elements information (catalog, etc.) from Windows to Mac

    I have been using photoshop elements for year. I'm currently using version 11 on Windows 7. I'm considering switching to a Mac and getting version 12 there. But before I do that, I want to make sure that there is a way to convert or transfer the catalog and the pictures and videos from Windows to Mac. Any help is appreciated.

    Sure. Basically you just do a full backup in windows using the organizer backup command and then restore it to the mac.

  • How to transfer license key from Windows to Mac for adobe photoshop lightroom 5?

    how to transfer license key from Windows to Mac for adobe photoshop lightroom 5?

    You can download from this link and validate with your serial number. You can run LR5 on both machines.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856

  • How  do I transfer iTunes music from Windows to Mac?

    How do I transfer iTunes music from windows to Mac?

    Click here and pick the option which best fits your situation.
    (124310)

  • I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

     I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.  
    I am currently using Photoshop Elements 8 on Windows 7.  After several years of use, I am self taught and adequately proficient for an amateur.  What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing. 
    Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust.  Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom.  Frankly, I'm thinking that it would be smoother to stay within the Apple product line. 
    So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies).  But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
    - If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?  
    - if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?  
    - Can it splice together several separate photos to give a panoramic?  
    If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not  support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).  
    Thanks in advance for your consideration and help! 

    I am concerned, however,  about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
    Thanks for any insight on this
    Amy,
    Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
    One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
    The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
    Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
    One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

  • External Hard Drive (from windows to Mac)

    Hi Mac users!
    I just moved from Windows to Mac and I'm very glad I made the switch. However, I am having some issues with my Win-Mac transistion. I have 3 external hard drives that I used under Windows to keep backups of my videos and personal files. Out of the 3 external hard drives, only one is recognized by OS X (10.5). I really need the other 2 to be recognized to transfer some more data to my new Mac system. Could you please help me to figure out what to do??
    Here are some information on my 3 externl hard drives:
    1 is a WD My Book (working fine)
    1 is a La Cie Porsche model (Not working)
    1 is a Ximeta (Not working)
    I tried several USB ports, USB hubs. I have checked the Utilities to make sure the hard drive is not recognized/detected. Please, i need help to recover some important information and to complete my Windows-Mac transistion!
    Thank you for your help!

    I had to ask...I also have to ask, when you tried a USB hub, was it an externally powered hub? Sometimes a USB disk won't mount because there isn't enough USB power. However, Mac OS has always given me an explicit message to that effect...
    If your LaCie came with a CD, you might use it to install drivers. In principle, that shouldn't be necessary, but is a possibility. If it is a drivers issue then you may be SOL for the Ximeta; glancing at their website--but not necessarily for the right product--they seem to claim that their hard drives require Windows. But I've never had to install drivers on a Mac to use an external hard drive.
    It shouldn't be an NTFS issue because NTFS is still readable, just not writable, as you already observed with the WD. The filesystem(s) should still mount.

  • IPod classic - switching from Windows to Mac

    I have an iPod classic and am switching from Windows to Mac - what's the best way to retain my iPod library? Thanks!

    If you just want to connect and use the iPod on the Mac then set it to manual update on your PC first. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
    Using iPod with Multiple computers
    Managing content manually on iPod and iPhone
    Syncing Music to iPod
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
    Macs can read Windows drives, the iPod shuffle for instance comes Windows formatted and is fully supported (you can update the firmware or restore it on the Mac and it retains it's Windows formatting). Other iPods (such as a 5th Generation or Classic for example) can be used in Windows format on a Mac but have to have the firmware updated or be restored on a PC to maintain the formatting. If however you don't intend using the iPod on a PC again you'll need to transfer your library from your PC so you can restore and reformat the iPod and keep it's firmware updated.
    Once you are safely connected there are a few things you can do to restore your new iTunes directly from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
    PodView Mac Only
    PodWorks Mac Only
    iPodDisk PPC Mac Only (experimental version available for Intel Macs)
    TuneAid Mac only (iPhone and iPod Touch compatible)
    iPodRip Mac & Windows
    YamiPod Mac & Windows
    Music Rescue Mac & Windows
    iPod Music Liberator Mac & Windows
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    Floola Mac & Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

  • Convert iPod from Windows to Mac

    I've been using my iPod (30GB) with Windows and am just now switching everything to a new MacBook Pro. Do I need to do anything to switch my iPod from Windows to Mac, or does it just sync with the new Mac without my having to do anything?

    Macs can read Windows formatting so your iPod should work Fine on your MacBook. However if you don't intend using the iPod on Windows again you should consider restoring it and formatting it on the Mac. If you keep it in Windows format you'll have to connect it back to a PC to make any firmware updates otherwise the formatting will be changed. One other thing, if you haven't transferred your music from the PC to the Mac you won't be able to sync the iPod if you do you'll lose what's on it. To be sure you don't accidentally erase the content you should set the iPod to manual update until your music is on the Mac.
    If your iPod is set to update automatically take care when connecting to your new computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. You should then be able to change your settings: iTunes Keyboard Shortcuts for OSX
    Just some additional information in regard to moving the music from your iPod in case you no longer have the PC. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7 A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there's a manual method of copying songs from your iPod to your Mac. The procedure is a bit involved but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    If you prefer something more automated there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod, this is just a selection. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    Senuti Mac Only
    iPodRip Mac Only
    PodWorks Mac Only
    PodView Mac Only
    iPodAccess Mac & Windows
    YamiPod Mac & Windows
    PodUtil Mac & Windows
    iPodCopy Mac & Windows
    Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

  • Migrating bookmarks from windows to mac

    Can I transfer my bookmarks from a windows platform to a mac platform and if so how do I do it?

    Hello,
    There are two ways of doing this:
    1. '''Firefox Sync''' - if you want to continue using both Windows and Mac versions of Firefox then you can use Firefox Sync to keep your bookmarks and other settings synchronised between the devices. See here for set up instructions: [[How do I set up Firefox Sync?]]
    2. '''Export as html and import''' - if you want to move permanently from Windows to Mac then I think the cleanest thing would be to export the bookmarks from Windows to HTML. Follow these instructions: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]] then transfer the HTML file to your mac and import them into Firefox there. Follow these instructions for the import: [[Import Bookmarks from a HTML file]]
    I hope that helps. Let me know if not.

  • Migrating Applications from Windows to Mac with new iPhone

    My original first gen iPhone died a horrible death a few months ago. I had always synced it to my Windows laptop. I just recently acquired a new iPhone and want to sync it instead to my iMac. However, I have a dozen or so iPhone applications that I still want and I cannot figure out how to migrate the applications that are recognized by iTunes on my Windows machine and transfer them to my iMac. I even attempted to download an application I already purchased from my iMac, and I was charged the fee for the iPhone application instead of it just recognizing i had previously purchased the application.
    Any assistance would be greatly appreciated.

    *1) moving the music*
    These pages may be of some help:
    How to move an iTunes library from a PC to Mac (and back)
    How to move your iTunes library from Windows to Mac
    *2) restoring the ipod as a Mac device*
    Connect the iPod to the Mac and restore it in iTunes. Restoring in iTunes for Mac will erase and reformat the iPod's hard drive, reload the software with the mac version and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes
    *3) pointing iTunes to and external library.*
    You might find this article useful: iLounge - Managing your iTunes Library on an External Hard Drive

  • I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    Posted in error.

Maybe you are looking for