Transfer Global Settings - Multiple sources

Gurus/Experts,
I have BW system connected to many other r3 systems and i have this problem coming up for unit of measures being different in all this systems ,so when i load data to cube it fails with error saying UOM not available for this record ,I replicate UOM using transfer global settings of BW and it solves issue
Questions here is what happens if i keep on tranferring global settings from different r3 systems will it overwrite or update it
example -
System R31 = 10 units in table T006
system R32 =  10 units in table T006
system R33 = 10 units in table  T006
will it show me 30 entries finally or it will only show me the entries from system R33  ONLY ,the last system i replicated in BW
thanks

even if they are not and lets say 2 records are same should be ok rite because finally we need the units value doesnt matter which system gets it
example
system A has value ST
system B has value ST
final table will have value ST since they are not unique ,but thats fine isnt it ,or i am wrong
thanks

Similar Messages

  • Transfer global settings for Fiscal year

    Hi friends,
    There are two entries are posted for Fiscal year in R/3.. In BW side, I know that replicate transfer global settings is good option to get R/3 data for the Fiscal year.. here there is no fiscal year option.. but there is fiscal year variant options.. i want to know how can i replicate global settings by which option and which mode should use.....
    Guide and help me...
    with regards,
    Jaya

    Hi,
        I doubt if we have such option for Fiscal variant. I maybe wrong.
    But try to get the data for Fiscal Variant in a flat file and load it to BW.
    or
    Check the the table T009B if the Fisc variant is Updated.
    If not, there must be some option for that.
    Regards,
    Balaji V

  • Question to Transferring Global Settings from Source Systems

    1) When we do this steps, we found the following information as follows, so the question is that which fields that we should maintain?
    BW User ALE
    Debugging User
    BEx order number
    Releasest. hier
    Monitor initial
    Last IDoc no.
    Last IS-Nr.
    XPRA executed
    Lock Mangr Logs
    MD: Sing. Rec. Inst
    RFC BI Accelerator
    2) If we maintain some of fields should we do something before, and how? e.g. we know BW user ALE = aleremote, so should we maintain aleremote user using SU01 both in R/3 and BW before we do Transferring Global Settings from Source Systems
    Thanks for the answer.

    Is anyone know how to setting Transferring Global Settings from Source Systems, your answer will be high appreciate.

  • Transfer Global setting for Currency

    Whenever a new currency gets added in the R3 source system, what needs to be done to get them added in BW?

    Hi,
    Try using  the below steps:
    1) Go to RSA1 --- Source systems
    Right click on the source system from which you want to update the currency in the BW system, and click on Transfer Global Settings
    2) Execute it with the following selections:
    Transfer Global Settings--Currencies
    Mode--Update Table
    3) This will update the u201CTCURCu201D table in BW system with the currencies defined   in the source system table
    4) Go to the transaction SE38 and execute the program u201CZBWRSIMPCUSTu201D
    5) Select the source system and run the program with following selections:
    Global table settings--CURRENCY
    Mode as --Update table
    6) This will update the u201CTCURCu201D table in BW.
    Running above program for BW is necessary, because adding new currency definitions in the BW system will deviate the ISO code settings for the TCURC table.
    ISO code is the standard worldwide currency key. Thus it should be unique.
    Above program will assign the unique currency key to the ISO code.

  • Usage of tranfer global settings

    Hi,
    Some of units of measure are not avialable in BI but available in R/3, because of this we are getting erroneous records & then available in error stack. Now i want to use transfer global settings option to get unavialable units. So if  i use transfter global settings option under rsa1->source system, "will it affects already existing setting in BI".  Any suggestions..
    Regds,
    Bhadri

    Hi Bhadri,
    Being BW developer you will not have authorization to insert/update the entries in standard tables like T006, TCURR etc. These activities are generally performed by either service management team or basis team which comprises functional people as well.
    Now in your case you can either request respective teams to add the UNIT entries in the concerned table or replicate the settings from R/3 to BW.
    Hope this helps you in resolving your issue.
    Regards,
    Yogesh.

  • Transfering global settings

    Hi All,
    We have created a process chain where in we have included the code for transferring global settings and for Exchange rate Transfer along with their variants.
    In this Variants the we have given the system names as the DE0.
    (Development BI - DB0, Development R/3 - DE0.
    Quality BI -  QB0, Quality R/3 - QE0.)
    The Process chain is working fine. We need to transport this to quality and then to production. My questions are:
    1. Would this transport be successful (as we are writing the system name as DE0)?
    2. We do not have an option of doing any changes in quality system. Would the quality system automatically convert the system name from DE0 to QE0?
    3. If not what is the right way to do this so that the process chain is successfully transported and transfers the global settings / Exchange rates from the target system's R/3.
    Thanks,
    Maddy

    Hi Maddy,
    Check this post: Re: Process Chian for Transfer Global Settings and Transfer Exchange Rate
    Check reply of Sri Arun Prian:
    The problem arises due to non assigning of source system in the variant.
    Please follow the steps:
    1. While you create variant from RSA1 - Source system - Transfer your global settings, there is a tab named "Copy Screen Assignment" at the top of the variant screen.
    2. Click "Copy Screen Assignment" and save the variant, which automatically inputs the required source system name in the input.
    3. Provide the same variant in the process chain along with program name.
    4. Execute the process chain and will be success.
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Global settings using program RSIMPCUST

    Experts,
      We would like to update Units, Fisc per and Currency through a program RSIMPCUST in BW.  When I tried to create a variant It is not allowing me to enter Source system name.
    Could you please help me how to enter this source system name ?
    If i transport this change to test system, then the source system name for the variant will it automatically converts into test source name or do i have to change this manually.
    Thanks a lot.

    You have to do that
    Right click on the source system Transfer global settings!
    VJ

  • Transfer of global settings from ECC to APO

    I know there is the 'transfer of global settings' option from within transaction RSA1 in APO to transfer units of measure, fiscal year variants etc from ECC to APO, to ensure synchronisation.
    How does this actually work? For example, suppose we have 14 units of measure in ECC, but already have 16 units in APO. If we run the synchronisation transaction, what will end up in APO? Is the complete table of units replaced in APO, so we would have just 14 units?
    Thanks, Bob Austin

    there is some explanation to what you have mentioned in Re: Factory Calendar
    this talks about calendars and is relevant till SCM 4.x
    I would imagine the situation would be the same for UOM
    In SCM 5 you have the option to update the tables, Rebuild the tables and also a simulation option

  • Apply Interpret Footage settings to multiple sources at the same time.

    I would like to be able to select multiple sources and conform their Pixel Aspect Ratio from "D1/DV NTSC (0.9091)" to "D1/DV NTSC Widescreen 16:9 (1.2121)"
    I would like to also be able to use watch folders in this way.
    I was informed that this was possible using scripts and I should post this question on the forum.
    How do you use scripts?  And how would can I achieve the above using a script?
    I need to be able to do this so when I choose the "Broadcast - H.264 - NTSC DV Widescreen" preset that I don't have black bars on the sides.  Even though our camera's are Widescreen the AJA card we use to capture our mix records in 4:3 aspect ratio.
    Using:
      Windows 7 (Fully Updated)
      Adobe Media Encoder CC (Fully Updated)
    Thanks,
    Daniel

    Figured it out, without scripting.  In the program select the sources only then you can set all of them at the same time.

  • Transfering Global Settings from R/3

    Hi All,
    I am supposed to load data into Bw from R/3 client 120. But because of no data in it we are using client 150 for testing as it contains some data. The data in 150 is not reliable and we are using it only to check our loads. Now, I want to do some loads from 150 and so want to transafer the global settings like fiscal year variants etc. from 150. I am not sure if the fiscal year variants and all the other settings will be same later in client 120. Now, my doubt is if I transfer all the settings from client 150 now for our testing can we delete all of them and transfer all the settings again from client 120 when it is ready? Is it something possible? If so, will it effect the future loads from client 120 in anyway?
    Your help will be highly appreciated in this.
    Best Rgds,
    James.

    Hi Sergio,
    Sorry, but I couldn't get what you exactly mean. How can we transfer the global settings from  120 with "rebuild tables" options? I have checked for that option by right click on the source system but couldn't find any.
    Best Rgds,
    James.

  • Import Global settings

    I want to import Global settings from R/3 to BW. How to perform this activity???
    Please search the forum before posting a thread
    Edited by: Pravender on Aug 27, 2010 8:19 PM

    Hi,
    You can use the below approach:
    RSA1 --> Source system --> Tranfer Global Settings --> Select the required thing which needs to be replicated like Currencies/Units/ Fiscal year variants cts... And use the Update tables option below which will update the required fields..
    or
    To automatically bring the update in r/3 to bw you can schedule that 2 program in background job to run periodically. basicaly RSIMPCUST is just same with the 'transfer global setting', it uses the same program. RSIMPCURR is for update currency exchange rate. This will take care of the things automatically.
    With this all the necessary units, currencies and other values will update the tables in BW.
    Hope this helps..
    Murali
    Edited by: Murali M on Aug 27, 2010 8:47 AM

  • Single Transfer Order for Multiple Handling Units

    I have been researchig the ability to create a single transfer order for multiple handling units.  My assumptions are if it can be done that:
    1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is different, that means different transfer order
    2) A TO can have multiple materials (line items) with different destination bins and quantities per bin
    I looked at the configuration for TO Split, but it's not clear that this will handle my requirement.
    I also saw this http://aq33.com/material-management/Articles-005798.html and it also says that my requirement can't be meant.  I'm just checking before I tell my customer this cannot be done.

    Yes you are right, if Source document is different, you need to go with different TO.
    But you can choose the Handling unit split, while creating a TO itself. i.e., You can quantify the goods for each handling unit.
    Edited by: Ganesh M on Feb 29, 2012 6:20 AM

  • Satellite L-50 can't play audio from multiple sources

    I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
    I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
    25/02/14
    DTS Studio Sound
    DTS Inc.
    Windows 8.1 - 64 Bit
    1.01.2700
     I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0 
    I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
    10/02/15
    Sound Driver
    Integrated Device Technology Inc.
    Windows 8.1 - 64 Bit
    6.10.6491.0
    IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
    Why are toshiba releaseing old driver as 'NEW' ?
    2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"
    Attachments:
    audio.png ‏6 KB
    test2.png ‏7 KB
    specs.png ‏16 KB

    Can you check the full model and part number from the laptop?
    - Peter

  • Satellite L50-A-19N can't play audio from multiple sources

    I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
    It goes away when I plug out my headphones..
    I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
    25/02/14
    DTS Studio Sound
    DTS Inc.
    Windows 8.1 - 64 Bit
    1.01.2700
    I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
    I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
    10/02/15
    Sound Driver
    Integrated Device Technology Inc.
    Windows 8.1 - 64 Bit
    6.10.6491.0
    IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
    Why are toshiba releaseing old driver as 'NEW' ?
    2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

    I see that the option called “give exclusive mode applications priority” has been checked.
    Usually different applications and programs can access the sound card simultaneously.
    For example: you can hear the sound in game, while you can run your own music via an external player.
    This is prevented with these options “give exclusive mode applications priority”.
    Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
    I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
    However, I use Win 7 and Realtek sound driver… It’s another configuration.
    So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

  • Open Hub - Data from multiple sources to single target

    Hello,
    I am using Open Hub to send the data from SAP BI to Flat files. I have a requirement where I want to create a single destination from multiple sources. In other words in BI we have different tables for attributes and text. I would like to combine the data from attributes  and text into a single file. For eg. I want to have material attributes and text in the same single file as output.
    Is this possible in Open Hub? If yes could you please help me to understand the process.
    Thanks,
    KK

    Hi,
    1. Create the Info Spoke and activate it
    2. Change it and go to transformation
    3. Check the box InfoSpoke with Transf. Using BAdI
    4. You are asked if you want to generate the spoke. Say yes & Simply set some texts and activate here, then return.
    5. You can now change the target structure. Simply create a Z structure with all the attributs & text field in it in the SE11 and enter it here.
    6. Double click on BAdI implementation & then double click again on "TRANSFORM" method of the implementation. It will take you to method  
    "IF_EX_OPENHUB_TRANSFORM~TRANSFORM"
    7. Write a code to select & fill the text field & map other filed with the attribute fields.
    Example:
    ZEMPLOYEE_ATTR_STRU - Target Structure for InfoSpoke EMPLOYEE_ATTR
    EMPLOYEE     /BI0/OIEMPLOYEE     NUMC     8     0     Employee
    DATETO     /BI0/OIDATETO     DATS     8     0     Valid to
    DATEFROM     /BI0/OIDATEFROM     DATS     8     0     Valid from
    COMP_CODE     /BI0/OICOMP_CODE     CHAR     4     0     Company code
    CO_MST_AR     /BI0/OICO_MST_AR     CHAR     4     0     Controlling Area of Master Cost Center
    HRPOSITION     /BI0/OIHRPOSITION     NUMC     8     0     Position
    MAST_CCTR     /BI0/OIMAST_CCTR     CHAR     10     0     Master Cost Center
    TXTMD     RSTXTMD     CHAR     40     0     Medium description
    Note: Text and attribute are in same structure.

Maybe you are looking for