Transfer Goods Recepient from SRM to R/3

Dear SRM Gurus,
Is it possible to transfer the Goods Recepient from SRM to a standard table (for POs) in R/3?
I ask this because we have implemented some customized ABAP in R/3 which sends emails to the requestor of a shopping cart when there is no delivery after 2 days the delivery days has past.
Now we want to change this so that the email will be send to the goods recepient as he/she is the person that will enter the goods receiving in the system.
Thanks in advance for your reply.
Best Regards,
Jean-Pierre

Hi,
Not sure why the email is being sent out from R/3. I guess you could have easily used prgrams RSWUWFMLEC and RSCONN01 to send out the email reminders from SRM itself.
However, for your current situation, to transfer the Goods Recepient from SRM to R/3, will involve huge customization effort, as this field doesnot exist on any of the EKPO, EBAN tables
Step 1: Create a Z Field in both EBAN and EKPO
Step 2: In the PR or PO transfer, you can use one of the follow on doc BADI in confuntion with BAPI_PO_CREATE1 or 4.6cBAPI_requisition_create...something like that...not sure on the name of the BAPI. So depending on your version you can find out the relevant BAPI info.
Step 3: Once this field is populated from SRM to R/3, you can customize your email notification program to send out the notification to the Goods Recepient.
I still feel you should handle this in SRM to keep things simple !
Pls Assign points if answer is usefull !
Sundeep

Similar Messages

  • Attachment transfer of PO from SRM to Back end for extended classic scenario

    Hi Experts,
         We are using the SRM 7.0 with EHP 701 and ECC 6 , we have a SRM requirement where we need to transfer the attachment of a PO to back end ECC. I tried to implement the note 1594966 , but it doesn't work . we are using Extended classic scenario. Please suggest some SAP notes or the procedure to be followed to achieve this.
    Thanks ,
    Aishwarya.M

    As far as I am aware this functionality of transferring attachment is not supported in Ext classic scneario  
    http://scn.sap.com/thread/1873708
    Also  I suggest you should debug and see if its sending attachment from SRM if yes then
    could be something missing at ECC side , To debug use this
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=340264144
     You may also check in SXI_monitor and see if attachment is being recieved and sent from SRM and ECC respectively
    Are you configuring this for the 1 st time or its an error which u encountered?
    You must raise a NOte to SAP for the same till a solution is found .
    This one is another which you can check ..
    http://wiki.scn.sap.com/wiki/display/SRM/Transfering+shopping+cart+attachments+to+the+backend+system

  • Can we transfer Business Partner from SRM to MM?

    Hi All,
    We created BP in SRM through Supplier registration, now we want this vendori .e BP to be present MM...is it prossible to transfer this vendor to MM?...
    Thanks
    Ravi

    Hi Ravi,
    Pls refer below threads. This should help you to map your requirement:
    Tranfer vendor data from SRM to ERP (R3 / ECC)
    Vendor replication from  SRM to R/3?
    External Vendor replication from SRM to R/3
    https://forums.sdn.sap.com/click.jspa?searchID=571462&messageID=1487382
    Replication of Vendor master from SRM to backend.
    Regards,
    Prashant
    Do reward points for helpful answers

  • BAPI to transfer PO data from SRM to SAP

    Hello, i have modified my Purchasing org. in SRM . Is there a BAPI i can use to transfer this modification to SAP.

    Hello Antish,
    How did you modify concerned PO ? With a specific report ?
    If this modification was not transfered to R/3, run function module BBP_PD_PO_TRANSFER_EXEC using PO Guid as importing parameter.
    Regards.
    Laurent.

  • Transfer supplier data from SRM to ECC

    Hi,
    As far as I know if we are using ROS only, then we can only have the one way synchronization from ECC to SRM. Thus in the process, if vendor register in ROS engine, then when we want to create the ECC vendor, we must create the data in ECC manually, and also link it manually as well.I know this for sure in SRM 5.0
    We are plannig to use SRM 7.0. Is this still the case? I also read somewhere that if we use SUS component, then t is possible for us to have vendor data in SRM synchronized to ECC.
    Is this true?
    Best regards,
    John

    Hi Nikhil,
    So you're saying that even if SUS is implemented and SRM_SUCO_1 is activated we still have to create supplier manually in ECC?
    I have checked the release note of SRM 7 and see this statement regarding SRM_SUCO_1:
    Supplier master replication to SAP SRM and SAP ERP back-end systems
    What does it mean by replication to SAP ERP back-end systems?
    Best regards,
    Yosea

  • Transfer attachment from SRM SHC to ECC PO

    Hi,
    Im working on SRM 7.0.Classic scenario.I need to enable the transfer of attachments from SRM SC to R/3 PO.Can anyone explain the steps to achieve the above?
    Also in case of extended classic scenario,is the attachment transferred automatically from the SRM Local PO to ECC PO?
    Thanks!
    regards,
    SRM Tech

    Hello SRMTECH,
    You have to do some configuration settings in SPRO
    SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Define Settings for Attachments.
    We are also working for the same requirement. We have did following configuration / customization to achieve this.
    - Activated BADI "BBP_CREATE_BE_RQ_NEW" in SRM and set the indicator as follow:
    cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
    cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
    cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
    - In ECC Side T.code DC10 and defined document type for SRM with following
    Add a New Document Type SRM (if not already exists). Set 'Use KPro', 'Version Assign' and 'Change
    Docs'. Set the Internal and External Number Range (02 and 01). Use MCDOKZNR as Number Exit.
    Ver No. Incr = 1 and Set the File Size (Usually 10000000 bytes).
    Once the Document Type is created, define Object links to PO Item and Pur Req Item. Use - Screen
    Number 247 and Screen Number 248 with Valuation Object of EBAN and EKPO for Objects EBAN
    (PReq) and EKPO (PO) for Doc Type SRM.
    After doing this changes we were able to transfer attachements but we are still facing one issue as we were not able to open that particular document in ECC / R3.
    See related threads for more pointers:
    Attachment transfer issue from Shopping cart to Purchase req in ECC
    Re: How to check the attachment in ME53N
    Re: Sending attachments from SRM to SAP Purchase Requisition
    Re: Attachments with follow-on documents.
    Arshad

  • Document transfer from SRM to DMS through content server

    Hi Everybody,
            In one of scenarios we need to transfer documents attached to the shopping cart line items in SRM to R/3.
           For that we followed the following procedure.
           1.In the SRM to R/3 system, the attachments are driven by the BADIs.
           2.In the BADI, if we define DMS_C1_ST as the storage category for R/3 Database, the DMS should work
           3.The existing DMS, the customized content server is Z_DMS.
          4.Using SRM (with Z_DMS)we are able to create the Document Info Record
          5.The attachments are not reflected in DMS (driven through SRM)
          6.When the attachments are added in the DMS manually, DMS works perfect
         I am thinking there might be some configuration required in content server for the conversion of original application files.
         If anybody have the solution for this please post here.
    Thanks,
    Rajesh.

    Hi
    <b>Please refer to the links below -></b>
    Re: Attachments in PR and PO
    Re: Sending attachments from SRM to SAP Purchase Requisition
    Re: Transfer  SC attachment from srm 5.0 to backend R/3
    Re: Attachments to backend
    Re: Attachments in PR and PO
    Re: URL vs. document attached in back end EBP 4.0 Classic/4.7 E
    http://help.sap.com/saphelp_47x200/helpdata/en/41/648838ab4e8a11e10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/d6/806c39917d423ee10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/9b/c2b9375e62545ce10000009b38f889/frameset.htm
    Do let me know incase you still have any queries.
    Regards
    - Atul

  • Classic Scenario- Service Item custom field transfer from SRM to ECC

    Hello Experts,
    I was looking for a way to transfer custom fields from SRM to ECC(PR/PO) for service items.I am on SRM 7.01 and ECC 6.0 ehp 5.
    The same custom fields are getting transferred for Material item using the BADI BBP_CREATE_BE_RQ_NEW.
    But the same badi doesnt work for service item transfer.
    I would appreciate it if someone could help me with this.
    Regards,
    Cruiser

    You can use the Function Module SPOOL_RQ_CREATE with the parameters as bellow and debug.
    REQNO = SC number
    REQUIS_NUMBER = as Purchase Req no ( from backend )
    IV_BE_LOGSYS = backend logical system.
    System will go through the same path as SC bridging to PR.
    HTH,
    Chandu
    Edited by: Chandrahasan H on Mar 23, 2011 3:36 PM

  • Product Contract and supplier data transfer from SRM to SAP XI

    Dear MDM Guru's
    I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials  or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
    Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
    Please help.
    Regards
    Jacob

    HI Jacob,
    I believe below documents will give you the information which you are looking.
    [SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
    [SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
    [SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
    Please revert if you still get any question, after going though these documents..
    - Shiv

  • DMS configuration for attachement transfer from SRM to R/3

    Hi,
    SRM 5.0
    R/3 ECC6.0
    Scenario : SRM SC attachment transfer to PR in R/3
    I have done the DC10 and DC 30 configuration in R3
    BADI BBP_CREATE_REQ_BACK is implemented
    The attachement transfer is not happening to R/3
    can someone let me know the necessary DMS configuration to be done in backend system and some steps to validate the SRM configuration i have already done
    Thanks
    Jayesh

    Hi
    <b>Please refer to the links below -></b>
    Re: Attachments in PR and PO
    Re: Sending attachments from SRM to SAP Purchase Requisition
    Re: Transfer  SC attachment from srm 5.0 to backend R/3
    Re: Attachments to backend
    Re: Attachments in PR and PO
    Re: URL vs. document attached in back end EBP 4.0 Classic/4.7 E
    http://help.sap.com/saphelp_47x200/helpdata/en/41/648838ab4e8a11e10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/d6/806c39917d423ee10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/9b/c2b9375e62545ce10000009b38f889/frameset.htm
    Do let me know incase you still have any queries.
    Regards
    - Atul

  • BBP_PO_INBOUND_BADI:Transfer value from SRM to ECC PO custom field

    Hello, everyone
         Our SRM version is 7.13 with classic scenario,  ECC version is 6.17.  transferring quotation data to ECC for creating PO by PI.
        I created a custom field such as Z1 for PO in ECC ,  I need transfer someone value from SRM to Z1 when press 'create PO' in quotation,
    So  I have to use BADI:BBP_PO_INBOUND_BADI in ECC before PO generating,  but I found the breakpoint can not  reach this BADI, Why ?  how should I do?
    I used to apply normally  this BADI in SRM7.02 and ECC6.05  without PI  with extend classic scenario.
    Thanks very much
      Jesse.

    Hi Jesse,
    I think the BBP_PO_INBOUND_BADI  is used to enhance the data when the PO is sent via BAPI.
    Please check the PI interface name that you are using and find out the Proxy name (in Tcode: SPROXY) and find an Enhancement spot (either in SRM or in ECC).
    Regards
    Venkat

  • How to transfer user defined accounting fields from SRM to ECC ?

    Hi!
    We are running SRM 5.0 and ECC 6.0 with classic scenario.
    We have defined Business entity filed account assignment tab in SRM SHC.
    New fields are also defined in tables BBP_C_ACC_F and in BBP_C_ACCFD and added in the structure also INCL_EEW_PD_ACC_CSF. New fields are also defined in srpo accounting.
    In R/3 the same field is already defined as it is standard one.
    When I create PR or PO i entered the Business entity for the account assignment R i.e real estate.
    However, when I order my shopping cart with values in new fields, the values are not transferred into backend.
    Standard fields transfer nicely, but the user defined fields dont transfer.
    Can any please let me know what we have to do for these user defined values to transfer to back end. We need to implement any BADI ?
    Please let me know
    Thanks

    Hi,
    Use  BADI  BBP_CREATE_PO_BACK ( t.code SE18) can transfer custom fields
    some useful links to transfer custom fields from SRM to ECC..
    Re: Purchase Order item customer fields
    implementation of BADI BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI
    Re: Custom field values are not being transfered to the backend system
    Re: How to replicate SRM PO customer fields to ERP PO in ECS
    Update Custom Fields in PO - BBP_ECS_PO_OUT_BADI
    BBP_ECS_PO_OUT_BADI
    implementation of BADI BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI
    Update Header Text in R/3 using BBP_ECS_PO_OUT_BADI
    Hope these are helpful..
    Thanks
    prasad .s

  • Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

    Dear SRM-MDM experts,
    We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0  The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results?  SLG1 just shows how many products were processed.  We need to see the list of the products generated.
    Thanks and regards
    Pedzi

    Hi Pedzi,
    You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
    C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
    Thanks,
    Anshuk Saxena

  • PO Replication from SRM to ERP

    Hello,
    We replicate purchase orders from SRM to ERP.  Now we would like to make all of the contract data available for reporting in BW.  Would anyone know a bit more about how purchase orders are replicated from SRM to ERP?  The name of the program that actually performs the replication would be great, but any information would be appreciated.

    Hi Larry,
    You can transfer you purchase orders based on your product categories and purchasing group and purchasing organsiations and their setting in SRM and ERP.
    To do that before you need to replicate Products, Product categories from ERP to SRM then you can transfer your PO from SRM to ERP.
    see the link below.
    http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
    If you already done replication you need to maintain a purchasing group which will handle all the requirements that are to be transferred to ERP from SRM.
    This Purchasing group should also be part of  Organsiation structure in ERP.
    With regards,
    mahesh

  • Request for PO attachment replication from SRM 4.0 to ECC 5.0 in Extended C

    Hi All,
    I want to replicate the Purchase Order Item Level attachment from SRM 4.0 to ECC 5.0 in Extended Classic Scenario.
    Please let me know the procedure for the same like related BADIs in SRM and ECC.
    Could you please send any documents related to Document Manage System to my gmail id sudarsan.srm ?
    Best Regards,
    Sudarsan

    Hi All,
    I did the following Steps to replicate PO Attachments from SRM 4.0 to ECC 5.0 in Extended Classic Scenario as per OSS Note 1057932:
    Step 1: I activated BAdI BBP_CREATE_PO_BACK~Fill_PO_INTERFACE in SRM System and added the following Code
    CV_ATTACH_TRANSFER_ACTIVE = 'X'
    CV_ATTACH_BE_STORAGE_CAT = 'DMS_C1_ST'
    CV_ATTACH_BE_DOC_TYPE = 'SRM'.
    Step 2: I created Doc Type SRM in ECC5.o with the help of DC10 Tr Code.
    Step 3: I maintained Data Carrier Type PC entry with the help of DC20 Tr Code in ECC 5.0 and default ebtries for Front End Computer Details. (I crsoss checked Storage Category DMS_C1_ST in ECC5.0, it is available).
    Step 4: I maintained all the details (document Types) for PC Carrier Type with the help of DC30 as per OSS Note.
    Then I tested the PO attachment replication scenario. I could not find the attachment in ECC5.0 in PO (ECC5.) which available in SRM PO (SRM 4.0)
    Kindly guide me or suggest me is there any additional settings required to transfer PO attachment from SRM to ECC5.0
    Thanks a lot in adavance.
    Thanks,
    Koyya

Maybe you are looking for