Transfer (Idocs and TRFC): Errors occured
Dear All,
data extraction from R/3 into BI is working for small number of records. for huge number of records it ends with error,
i have adjusted info package setting DataS. Default Data Transfer but did't work. on the R/3 side i can see "transaction recorded" on tcode SM58 and the job successfully completed
please share me your experience on this issue,
With Regards,
Okay then I would think that there is some cofiguration issue related to communication between two system. Can you check below:
1. SM59 - RFC connections are wroking fine?
2. Any stuck Idoc or failed idocs in WE05/WE02- just trigger the infopackage and have look at WE05 and monitor the idocs. It may happen that you are able to recieve the Idocs but not able to send it back.
3. Configuration in WE20 for partner profiles in ECC system for your BW system. mainly outbound parameters message type RSSEND. Check if is as transfer immedeately.
4. Try executing your datasource in RSA3 with same exact selections as you pass from BW.
5. Check if you have any short dumps in ST22.
6. Check logs in SM21.
7. Try running infopackage for the same selection from past when you know it worked fine.
Please let me know findings.
Thanks
Amit
Similar Messages
-
Transfer(IDocs and TRFC) error when use infopackage to load data from R/3
I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
transfer(IDocs and TRFC): Errors occurred
request IDoc: Application document not posted
Does anybody know how can correct this error?
Thanks great.Hi Yimeng,
Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
regards,
Sumit -
Transfer (Idocs and TRFC): Errors ocurred
This error occured when we are loading flatfile (trans) into transactional infocube:
Info Idoc 1: IDoc with errors addeed (in red)
Info Idoc 2: IDoc with errors addeed (in red)
Info Idoc 3: IDoc with errors addeed (in red)
Data Package 1: arrieved in BW; Processing: Selected number does not agree with transferred
Info Idoc 3: IDoc with errors addeed (in red)What other data package errors are you getting? TRy going to a PSA first if you can...I have never tried loading a flat file to a transactional ODS directly.
/smw -
Error in Transfer (IDOC and TRFC )
Hi experts
I am getting the error in Transfer (IDOC and TRFC ) Info IDoc 1 : Sent not arrived : Error posting data to port" when I am trying to Upload data by executing an infopackage.
Pl. advice.
Thankls in advance
Dinesh SharmaHi Dinesh,
This latest error code E0 266 & is really a Basis one (BC-MID-ALE); not BW.
If the error occurs all the time then please do the following.
Firstly, please ensure that the relavant RFC destination is set up as per SAP Note 613389. The use of a logon language is a must.
Secondly, please also add the value of SCP2 as well as SCP5 to the role of the RFC user as per Note 784381 (SCP2 isn't mentioned in the note but please add it anyway) - This should resolve your issue.
If you only see this error sometimes, then set the flag in tcode OYEA as per Note 784381.
Hope this helps,
Colum -
Transfer (IDocs and TRFC): Missing messages or warnings
Hi,
While loading data from ECC to BI, I'm getting the following Error. It is for all DataSources...even for Full loads with 15 records also.
Requests (messages): Everything OK
Extraction (messages): Missing messages
-->Missing message: Request received
-->Missing message: Number of sent records
-->Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Request IDoc : Application document posted
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK
Data Package 1 ( 10 Records ) : Everything OK
Note: I tried with following options, so please don't repeate again.
1. No LUWS in ECC in SM58.
2. Connections are OK an dtested in SM59.
3. WE20 is also OK.
4. Job Finished successfully in ECC.
5. No Dumps in ST22 in ECC.
6. Dumps in BW in ST22.
Error Message is:
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSSM" or "LRSSMU36"
"RSSM_OLTPSOURCE_SELECTIONS"
7. Tried with BD87 in ECC and BI also.
Thanks
GangaHi,
Every thing is fine. And I searched for OSS note and I found some notes but I'm unable to resolve it. My data Target is Cube and DSO's.
Note 852443 - Dump in include LRSSMU36 RSSM_OLTPSOURCE_SELECTIONS
Note 869628 - Constant WAITUPDA in SMQ1 and performance optimization
Note 901878 - Information IDoc Sent, but did not arrive
Note 913330 - tRFC LUWs are not created
Thanks
Ganga -
Transfer (IDocs and TRFC ) Missing Messages
Hi,
I have taken INIT load and records were loaded successfully in the target system.Now when i run delta , the status goes Green but 0 records are loaded ,and also there is error as :
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Everything OK
Data request received
Data selection scheduled
No data available, data selection ended
Transfer (IDocs and TRFC): Missing messages
Processing (data packet): No data
Subseq. processing (messages) : No errors
Process Chains : Everything OK
Other (messages): Everything OK
I have checked extractor in source system and it has records in it.
Edited by: Bhavna_m on Aug 26, 2011 12:57 PMHi,
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Thanks,
JituK -
I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution
the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem
-
Hi sap bw'iets
can any one describe step-by-step process to sloving IDOC or TRFC ERROR in production support.
thank you.
regards,
kiranhi kiran,
sometimes idocs stucks in the source system, so it shows yellow in the monitor even if every thing else is showin green. so to correct this, go to environment -> Transact RFC -> In the Source System. If the status is showing "Executing" then leave it, otherwise u can drag it to BW by selecting execute LUW (F6), by selecting the tRFC.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN * -
A update(6.1.5) was available for my ipod 4 and an error occurred. Itunes is telling me to restore my ipod, but i know that if i restore my ipod everything will be erased. But will i have the opinion to get everything back after i restore my ipod? I dont have any music, but i have about 14000 photos. And none of my photos are saved to my laptop. Help Please!
Photos
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official -
I was updating my iphone 4 and an error occurred and now i can't restore my iphone
I was updating my iphone 4 and an error occurred and now i can't restore my iphone and it wont show up in my itunes or on my computer
http://support.apple.com/kb/HT1808
-
when trying to download the latest itunes it stops half way through and says "error occured whilst installing the update"
anybody know how to fix this?Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9
Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed? -
Hello everybody!
I finally installed Mac OS X Lion on my MacBook Pro yesterday and I bought it from Mac's App Store! However I went to iTunes stroe using my Lion Operating System and I downloaded the new Cut the Rope: Experiments and my account was working fine in the beginning of the day! Then I realised that I wanna changed my accounts e-mail adress and this is not my main e-mail adress! So I changed it and after that I am not able to sign in to iTunes Store from my Mac OR FaceTime! BTW FaceTime was working fine as well! I tried creating new Apple ID's but even they didn't work for me! I received the error "We could not complete your iTunes store request! And unknown error occurred! (12002)"!
I tried signing in with my friends MacBook Pro with a different IP and he we received the same error again! I can sign in to apple.com through Safari and I can sign in with my iPod Touch! What should I do ??! Any soloutions ?!?!
Peace
RominGot it. I realized that I am logged in under my old log-in name (email) on my iPad. After I signed out and logged in back under my new log-in name (email) on iPad, it went through on my Mac as well. Check if you are not logged in to iTunes under the old ID on another device.
MH -
I have updated my iphone 3 version 4.1.but in the middle of the updating time one message is coming.that is,(the iphone``iphone ``coundnot be restore and unknown error occured( 1015 )
Your phone is jailbroken. You can not get help here.
-
After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???
http://support.apple.com/kb/TS3694#error3194
This might help. Good luck, I really hope this all works out. :-)
Maybe you are looking for
-
How to define namespace with one XSD using in two different DB-Locations ?
I'm not clear,How to define namespace, targetnamespace, schemaLocation or NoNamespaceSchemaLocation when using one common schema.xsd-definition in two different database-locations for exchange xml-documents? when insert xml-document I've got an error
-
Share via Mail not working after Yosemite upgrade
Hi all, I recently upgraded from Lion to Yosemite and now I cannot use the Send via Mail option in Pages (or Numbers for that matter). I searched for this already in another tread but the answer (permission repair) did not work. The Exporting option
-
ITunes not responding in Windows 8.1
I cannot get iTunes to respond in Windows 8.1. I have uninstalled and reinstalled iTunes twice and I still cannot get the program to respond. I have the latest version, 11.2 (?)
-
Read a barcode(including line feeds) into text item
When I scan a bar code from a text item, I am unable to retrieve line feeds that are in a barcode. I need line feeds to retrieve various values encoded in the barcode. When I scan the same code on a notepad, I get output in multi-lines. But, oracle f
-
Pages 5.2 OSX 10.9.2 I have been getting this error (on keynote as well) "This document was changed in another application. To work on that version, click Revert. Changes you made here will be saved as a version on your Mac. Tip: If you're using an