Transfer (Idocs and TRFC): Errors ocurred

This error occured when we are loading flatfile (trans) into transactional infocube:
Info Idoc 1: IDoc with errors addeed (in red)
Info Idoc 2: IDoc with errors addeed (in red)
Info Idoc 3: IDoc with errors addeed (in red)
Data Package 1: arrieved in BW; Processing: Selected number does not agree with transferred
Info Idoc 3: IDoc with errors addeed (in red)

What other data package errors are you getting? TRy going to a PSA first if you can...I have never tried loading a flat file to a transactional ODS directly.
/smw

Similar Messages

Transfer(IDocs and TRFC) error when use infopackage to load data from R/3

I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
transfer(IDocs and TRFC): Errors occurred
request IDoc: Application document not posted
Does anybody know how can correct this error?
Thanks great.

Hi Yimeng,
Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
regards,
Sumit

Transfer (Idocs and TRFC): Errors occured

Dear All,
data extraction from R/3 into BI is working for small number of records. for huge number of records it ends with error,
i have adjusted info package setting DataS. Default Data Transfer but did't work. on the R/3 side i can see "transaction recorded" on tcode SM58 and the job successfully completed
please share me your experience on this issue,
With Regards,

Okay then I would think that there is some cofiguration issue related to communication between two system. Can you check below:
1. SM59 - RFC connections are wroking fine?
2. Any stuck Idoc or failed idocs in WE05/WE02- just trigger the infopackage and have look at WE05 and monitor the idocs. It may happen that you are able to recieve the Idocs but not able to send it back.
3. Configuration in WE20 for partner profiles in ECC system for your BW system. mainly outbound parameters message type RSSEND. Check if is as transfer immedeately.
4. Try executing your datasource in RSA3 with same exact selections as you pass from BW.
5. Check if you have any short dumps in ST22.
6. Check logs in SM21.
7. Try running infopackage for the same selection from past when you know it worked fine.
Please let me know findings.
Thanks
Amit

Error in Transfer (IDOC and TRFC )

Hi experts
I am getting the error in Transfer (IDOC and TRFC ) Info IDoc 1 : Sent not arrived : Error posting data to port" when I am trying to Upload data by executing an infopackage.
Pl. advice.
Thankls in advance
Dinesh Sharma

Hi Dinesh,
This latest error code E0 266 & is really a Basis one (BC-MID-ALE); not BW.
If the error occurs all the time then please do the following.
Firstly, please ensure that the relavant RFC destination is set up as per SAP Note 613389. The use of a logon language is a must.
Secondly, please also add the value of SCP2 as well as SCP5 to the role of the RFC user as per Note 784381 (SCP2 isn't mentioned in the note but please add it anyway) - This should resolve your issue.
If you only see this error sometimes, then set the flag in tcode OYEA as per Note 784381.
Hope this helps,
Colum

Transfer (IDocs and TRFC): Missing messages or warnings

Hi,
While loading data from ECC to BI, I'm getting the following Error. It is for all DataSources...even for Full loads with 15 records also.
Requests (messages): Everything OK
Extraction (messages): Missing messages
-->Missing message: Request received
-->Missing message: Number of sent records
-->Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Request IDoc : Application document posted
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK
Data Package 1 ( 10 Records ) : Everything OK
Note: I tried with following options, so please don't repeate again.
1. No LUWS in ECC in SM58.
2. Connections are OK an dtested in SM59.
3. WE20 is also OK.
4. Job Finished successfully in ECC.
5. No Dumps in ST22 in ECC.
6. Dumps in BW in ST22.
Error Message is:
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSSM" or "LRSSMU36"
"RSSM_OLTPSOURCE_SELECTIONS"
7. Tried with BD87 in ECC and BI also.
Thanks
Ganga

Hi,
Every thing is fine. And I searched for OSS note and I found some notes but I'm unable to resolve it. My data Target is Cube and DSO's.
Note 852443 - Dump in include LRSSMU36 RSSM_OLTPSOURCE_SELECTIONS
Note 869628 - Constant WAITUPDA in SMQ1 and performance optimization
Note 901878 - Information IDoc Sent, but did not arrive
Note 913330 - tRFC LUWs are not created
Thanks
Ganga

Transfer (IDocs and TRFC ) Missing Messages

Hi,
I have taken INIT load and records were loaded successfully in the target system.Now when i run delta , the status goes Green but 0 records are loaded ,and also there is error as :
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Everything OK
Data request received
Data selection scheduled
No data available, data selection ended
Transfer (IDocs and TRFC): Missing messages
Processing (data packet): No data
Subseq. processing (messages) : No errors
Process Chains : Everything OK
Other (messages): Everything OK
I have checked extractor in source system and it has records in it.
Edited by: Bhavna_m on Aug 26, 2011 12:57 PM

Hi,
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Thanks,
JituK

Idoc or trfc error

Hi sap bw'iets
can any one describe step-by-step process to sloving IDOC or TRFC ERROR in production support.
thank you.
regards,
kiran

hi kiran,
sometimes idocs stucks in the source system, so it shows yellow in the monitor even if every thing else is showin green. so to correct this, go to environment -> Transact RFC -> In the Source System. If the status is showing "Executing" then leave it, otherwise u can drag it to BW by selecting execute LUW (F6), by selecting the tRFC.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Problem with IDOCS transfer and TRFC

Hi,
when i load data , the load is sucessful but i am getting error at Transfer (IDOCS and TRFC) , This is happening daily .load is sucessful and the data is moving to the target ,but i am unable to understand why this error is being encountered ? does anyone have idea abt why this is happening ?
Regards,
Roja.

hai roja,
Transfer of records takes by Idocs and trfc's between source system and B.w system.u are getting error at transfer idocs and trfcs means that data is still in the source system i.e no transfer takes place due to some error.In details tab u can see that idocs and trfcs are in yellow in colour.click on the scroll down at transfer idocs and trfcs in details,by doing this u can see all the idocs like Request idoc,idoc1,idoc2,.........
see which idoc's are in yellow in colour.
suppose if the idocs are in yellow in color means it indicates that either idoc or trfc are hanging in the b.w side or source system side.
how to process these idocs?.
go to source system and by using the T.code:bd87 u can see all the idocs in the system.if any idocs in bd87 shows some error(i.e in red color),process them by selecting the particular idoc and click on execute process tab which is there on the right hand side.
To process the trfc:
Data transfer into BW takes place via Idoc and as LUW (Logical Unit of work). These LUW`s get transferred as TRFC`s. Sometimes due to any system issue, these TRFCs might get hanged either in the Source system or BW system.
suppose if there is no idoc error means go and check the trfcs in sm58.there u cans ee the trfc states i.e executable and recorded.if the trfcs are in recorded state for a long time means u have to process them.Place the cursor on the TRFC that is to be reprocessed and goto menu Edit --> Execute LUW. Go back to the process monitor screen and give refresh for the data load it can be found in the details tab that the TRFCs were processed and data load would have proceeded to next step.
Hope this helps u...assign points.......
regards,
sri

Transfer idoc

hi experts,
what is the differance between transfer idoc and collective idoc

Hi leena,
Transferring Idoc means sending Idoc to receivers using outbound program.
Collecting Idoc means receiving idoc using inbound program
Regards
Gokul
Reward Points if Useful

IDOCs in trfc with status text as error

Hi,
I have IDOCs in trfc queue with status text as 'The ABAP/4 Open SQL array insert results in duplicate database records'.
How to reach this error point and rectify the same.
Regards,
Sheetal

Hi Sheetal,
Please refer the link,
Successfully posted IDOC from XI but not reflected in Receiver R/3 system
Best Regards.
Reward points if it is useful.

An error ocurred while loading this content! Ive using my ATV for more than 6 months and last week i update the sw and since then i have rented two movies and keep seeing the same message. I have reset the ATV two times without success. Any suggestions?

I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
I restarted the ATV - no success
I reset my wireless - no success
I reset my ATV - no success
netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
Any ideas?

I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
I restarted the ATV - no success
I reset my wireless - no success
I reset my ATV - no success
netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
Any ideas?

Zen V not recognized and unknown error transf

Hello,
This is my third Zen during the past two years, and none of them seem to work for at least one week. I bought a Zen V 4GB and have had it for two days and it is already not functioning correctly. I noticed that my songs would be transferred, but everytime I tried to transfer pictures, they just wouldn't. The reason it would give was "unknown error". I decided to download every update I could find for the Zen V (firmware, media source, etc), but the updates wouldn't finish installing correctly (the Zen would freeze after reboot, etc). I had to format the Zen and then install everything all over again, after that, the updates managed to install correctly. Afterwards, I successfully transferred pictures. I turned off the Zen, and when I later tried to transfer music, the unknown error message would appear again, and also other error messages such as "insufficient disk space", which was impossible because I had only transferred 68 pictures. I formated the Zen V once again, and gave it a "reload firmware". I managed to transfer some pictures and music afterwards, but, as soon as I disconnected the player, and connected it again to transfer more stuff, the error messages appeared again. As my patience was wearing thinner by the second, I disconnected the player, and connected it again. Now, the computer doesn't recognize it at all. The Zen V appears to be docked, though it sometimes appear as if it were charging and sometimes it doesn't, but still the computer doesn't recognize it. It says that the player isn't connected. I did notice that on my taskbar, the icon of "Safely Remove Hardware" began to appear. I double clicked it, thinking that the computer was recognizing the?player as a mass storage device, but there were no devices or components displayed on the window.
I really don't know what to do anymore, and I'm tired of having to format it, just so that it'll work correctly once. I don't know if I'm not doing something right, or whatever it is. I just feel very dissapointed. These problems were very similar to?the ones my other Zens (I had?a Zen Micro and Zen MicroPhoto before). Creative just keeps coming up with great innovati've products, but the same problems appear in?every one of them, what's up with that?I really need help with this... Any suggestions? Thank you.

I am having the same problems!
!!! Now my Zen will not turn on. How is a 2 child supposed to use this if her mom can't? I am not the only one experiences problems, my daughters friend also got one and her dad took it back to the store 2 times before he got one that actually worked. I have called customer service and after spending over an hour on the long distance phone call they were unable to help me and I eventually figured it out myself only to have it tell me the device was not connected IN THE MIDDLE OF DOWNLOADING!!
!!! This

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

How to use ale/idocs in sap crm to transfer master and transactional data

hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudhary

Kavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi

I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading

I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading

Implies that the DL is hosed and necessitating DLing it again.

Transfer (Idocs and TRFC): Errors ocurred

Similar Messages

Maybe you are looking for