Transfer Inforecord to MDM thru PI using MECCM

Hi,
I want to transfer inforecod data from ECC to MDM through PI.I am executing Tcode MECCM(Send Purchasing data to catalog) and log shows no erros but PI is not receving any message.
Selection: "X" Select Purch.Info record
Article - provided artciles
Info record category - '0'
Under catalog destination, Provided "catalog name" i.e MDM repository name
Am I missing any othe info and config here?
If possible, pls provide steps / checkpoints for using MECCM.
Thanks,
Srini
Edited by: SXP on Sep 28, 2011 10:53 PM

This has been resolved by myself after correcting sender Business system validity period.In debugging i found that,program is checking business sytem validity by readig TABLE "LCRT_CLNTCACHE" ,field "AEDAT" and comparing with current date.I changed validity date to current date and processed it.It worked but not sure how this date has been set in this table.
Thanks!

Similar Messages

HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

How to transfer range parameter from vb when using bapi calling

Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

Did you get the solution to your problem? Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

If I get a FaceTime call on my iPhone, can I transfer it to my iPad to use FaceTime there instead?

I want to know if I get a FaceTime call on my iPhone, can I transfer it to my iPad to use that instead of my iPhone?

NO you can't forward the call.
You will have to answer on your Mac. Whomever is calling you will need to use your apple id, to use the computer for facetime.
using facetime http://support.apple.com/kb/ht4319

All of sudden my Apple Mail won't transfer photos from Mail to iPhoto using the "add to iPhoto" feature in the drop down menu

All of sudden my Apple Mail won't transfer photos from Mail to iPhoto using the "add to iPhoto" feature in the drop down menu. Do you know how to fix this?

mmchisholm - just so you know you're not alone, I too am having the exact same issue as of latest software update bundle. Have to manually add each photo until Apple issues solution or minor software update.

Can I transfer the entries in my calendar using NFC and S Beam to another Galaxy III?

Can I transfer the entries in my calendar using NFC and S Beam to another Galaxy III or is there another way?

Hi Jcrumet!
Fantastic question! I know its important to have a device that can help make daily activities easy. Let's get this resolved. Yes, NFC through Android Beam lets you instantly share URLs, contacts and calendar events with other Android Beam-capable devices. Are you having issues completing a transfer? If so, what is the specific error message that you are receiving? Just to clarify, are you wanting another way to send a calendar entry to another galaxy 3 device outside of NFC/S Beam? Keep me posted.
Thanks,
Pamelaf_vzwsupport
Tweet us @vzwsupport

I do not achieveto transfer the files from my PC using the W.M.A. The whole process is normal up to the point where every machine must recognize the numerical code. After that indicates that he is inspecting the computer and no more. Sugerences?

I do not achieve to transfer the files from my PC using the W.M.A. The whole process is normal up to the point where every machine must recognize the numerical code. After that the assistant indicates that he is inspecting the computer and not show the list of transference (files, emails, etc.). In this point nothing is parked and done any more. Which can be the problem? Thank you.

I think you posted to the wrong place. This if for iMacs 2006 & older. I asked the host to mover you to Lion.
What version of X are you running?
Here is how to find out what version of Mac OS you are running:
Click on the blue apple in the upper left hand of the screen.
click on this icon
Click on the first line, "About This Mac"
Most of these are numbers & that's what we want.
What version & Processor do you have?

Develop MDM Heirarchy table using Webdynpro Tree

Hi
Can anyone let me know how i can build a MDM Heirarchy table using webdynpro tree.
Thanks

Can you be more specific? Is your problem with MDM or Web Dynpro? And what do you mean by "build an MDM Hierarchy Table"?
Walter

Before lollypop upgrade I could transfer files from LGg3 to computer using the LG supplied USB cord. How do I fix this bug?

Before lollypop upgrade I could transfer files from LGg3 to computer using the LG supplied USB cord. How do I fix this bug?

Is the G3 not recognized by the PC? Or is it recognized and you don't see the ext SD card? Are you able to use the Wireless Storage feature to transfer? Do you have updated USB drivers from the LG support site?

How do i transfer iPhotos onto a thumb drive using yosemite

how do i transfer iPhotos onto a thumb drive using yosemite.? thank you

If you are referring to the iPhotos Library do the following:
Open Finder and navigate to where your iPhotos Library is, by default it's in the Pictures folder
Control click the iPhotos Library and select Copy
Now navigate to your thumb drive and control click, select Paste item
If you are referring to transfer the actual photos, you will need to export all of them from iPhoto to your thumb drive.
Paul K

HT204053 transfer photos from iPhone to mac using iCloud?

transfer photes from iphone to mac using icloud ?

Connect the iPhone to your Mac and launch iPhoto. It will detect the photos and indicate those that are not already in the library so you can import them.
Be careful in letting iPhoto delete the photos from the iPhone. It's best to delete them manually from the iPhone so you have more control over what gets deleted.
Once you have your iPhone and iPhoto setup with Photo Stream to automatically import all new photos taken with your iPhone it'll be a seamless transfer:
OT

Mdm server connectivity using JCA

hi need code for mdm server connectivity using JCA.
Regards,
venki.

Hi venki ,
Go through these links it may help you with a better understanding on the topic:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_con/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373131333330%7d
MDM JCo Connection takes a long time
MDM connectivity to java application
Hope It Helped,
Kindly Reward Points if found useful
Thanks & Regards
Simona Pinto

Reg..Not able to transfer items form MDM to SRM(Procurement System)

Hi,
We are implementing SRM5.0 with SRM-MDM2.0.
We have done all the initial level settings in SRM-MDM2.0, and able to add items in shopping cart and view the shopping cart through web, but the moment we click on "Transfer Items" the next screen display the following error message
(404 not found. The request resource doesnt found)
Though we have enter all the details in SRM > Master Data> Define Web Application Server Call Structure area and maintained the Catalog Id in the Org Structure Attributes link too.
But still we are facing the same problem.
Note-: Please help me once we create catalog in MDM how these catalog to be used by SRM users, what are the importent settings/configuration required for the same.
Points will be awarded for the help.
BR,
Vijay Mittal

Hi,
Just try this one ,may be it works.
While defining external webservices ,when u create a new entey u get a tab of technical settings ,check
Use Error Log
Use HTTP GET to call Web service.
then using slg1 transaction just check wat error r u getting then u can act accordingly
Regards
Nisha

Images being over-written when using MECCM

Hi,
We are using MDM catalog with SRM7.0. We are adding the images in the data manager. We have also added the field image to be displayed in the catalog. But every time we run MECCM, for uploading new data, the images stored for the previously for materials is over-written as blank.
Although the images are visible in the data manager. Kindly help me to resolve this issue.
Thanks,
Bhakti

Hi Masa,
Thanks for your reply. The issue has been resolved. Actually, we had just configured the image setting for one user only. Whereas, we were checking the catalog from another users id.
Now, we have done the settings for "default" user & our issue has been resolved.
Thanks,
Bhakti

Item will not transfer to/ from external drive "in use" error.

I have searched the boards and found a handful of suggestions that I have tried with very limited success. My assumption is that is is a drive issue rather than a mac issue (Enlighten me if I am not posting in the right place!)
I'd like to be able to avoid deleting the files and reformatting as I'd have a very tough time reloading the information seeing that I can't copy directly from that disk and the backup is in a different physical location (about 3 time zones away). Please let me know if there is something that can be done to find what the "hang up" is on this disk and pinpoint the error rather than having to start from scratch. Here is a more detailed background:
Computer - Mac Mini running 10.6.8 (I have tried on two separate machines of the same model and OS as well as on a Mac Pro also running 10.6.8 with the same results)
What I am trying to do: Copy several folders woth of .mov and .avi files of varying size (files are up to about 9GB but most are around 100MB) over firewire 800 from a 1TB LaCie Rugged to a 4TB G-Raid. (I have tried copying whole folders as well as individual files).
The Issue: In the middle of a large transfer of multiple files nested in a folder I got an error message saying that the file could not be copied because it was "in use." I tried again and got the error again, I then tried moving individual folders and started getting the error even earlier in the transfer.
What I have tried: Restarted, tried on multiple systems, and verified and repaired the questionable disk (even though no errors were being reported).
I then remembered a time when I had a similar issue that turned out to be a Quicklook Bug so I terminated Quicklookhelper in my processes and restarted (no luck) I changed my view settings in Finder to not have a preview (no luck).
I took the advice of another board and trashed com.apple.QuickLookDaemon and com.apple.QuickLookDaemon.plist and restarted (no luck).
I then tried verifying the disk again and it did come up with an error though it claimed to successfully repair it. (I will post the report from disk utility at the end for anyone that thinks it might be helpful)
At this point I was able to transfer one file of 4+GB to the other disk. Then when I went to go to the next file I started getting the same error. I went throught the above "trash and repair" process that worked before but saw no results this time.
I also noticed that I could not "trash"com.apple.QuickLookDaemon and com.apple.QuickLookDaemon.plist while the faulty drive was mounted as it was coming up as "in use" as well.
Any suggestions? I'd love you forever.
(Here is the report from Disk Utility: Yes, the faulty drive is called "Baby Mama")
Verifying volume “BABY MAMA”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Unused node is not erased (node = 29880)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 280)
Checking volume bitmap.
Volume bitmap needs minor repair for under-allocation
Checking volume information.
Volume header needs minor repair
The volume BABY MAMA was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “BABY MAMA”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 416)
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume BABY MAMA was repaired successfully.
Volume repair complete.Updating boot support partitions for the volume as required.

Console isn't reporting anything other than "aborted" whenever it fails to transfer.
For a minute the drive seemed to fail entirely, but then is able to be repaied in disk Utility (after 2 tries).
It also ocassionally won't unmount because the drive too is "in use" (despite the fact that this would be impossible as no other programs are running after I restart.
I got 2 small files to transfer in Safe Mode, but then I was back to the same errors.
Time Machine isn't running and I added the drive to the Privacy Pane. So far I'm still having a hang up with this thing.
All good suggestions though. I appreciate it.
I wonder what the process is that is holding it up!?! Is the "node" error I keep seeing some sort of clue? I can't find much about it.

Transfer Inforecord to MDM thru PI using MECCM

Similar Messages

Maybe you are looking for