Transfer Library from PPC to new Intel iMac

I have an older G5 running iTunes 10 (latest) and am getting ready to buy new iMac that I assume will be running iTunes 10. My question is if there will be an issue transferring the library from the PPC version to the Intel version, even though they are both iTunes 10. My library is really big, around 300GB, because it contains movies, etc. I don't have room on my PPC HD to create a back up before I transfer the library. Will it be safe if I keep the PPC around for a couple weeks while I migrate files over? I'll have the same issue with my iPhoto and iMovie libraries. Thanks in advance.

Hi Chris,
Thanks for the note.
I wouldn't have asked if I didn't already look at that.. I would do it in a second - unfortunately, there is no sense of real control here - for example, if I'm migrating mail, does it migrate all my messages? Just my password/account settings? I don't want my mail content. I can easily set up the password/account settings by hand. Should I? I don't know.
I don't want to migrate all apps... I want to migrate iTunes.
I don't want to migrate all users... just me.
But... I am not willing to start poking "ok" and keeping my fingers crossed in hopes that I won't have to go through an hour of work to undo what I should have had the choice to avoid in the first place.
This may all be speculation, but it wouldn't be if the process was clear, or stated "all or nothing" - but it doesn't, at least, as far as I can tell.
The Apple site has little that really helps either:
http://www.apple.com/pro/tips/migration.html
I sure don't mind doing things by hand - I've been doing that for 20 years. However, I do mind -undoing- things by hand.

Similar Messages

Old Computer crashed! Want to transfer library from Mini to new computer

Hi! So... my old computer crashed , w/ no back up files! My Ipod Mini is totally intact, w/ my library, but I can't seem to load my library onto my new computer! I was told that if I try to "sync" The songs on my Ipod that I will lose my whole library and it will erase all my songs! Help!!!

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
SharePod Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

How do I move my old library from PPC to new MBP?

Hello,
I would appreciate any help as I'm not sure where to start.
I have an old G4 powerbook and would like to move AND merge ALL of my photos into one library. I will back them all up to my external harddrive using super duper and sync them to my appletv.
Where do I start? I currently have 100 photos in my iphoto on my MBP now. I will be moving 6000 photos to it. Terrance asked if I had a managed library and I do with both computers. I bought a firewire connector from OWC and am ready to proceed.
Where to start?
Thanks for your help!!!!!

In the Spotlight search window if you click on a file it will tell you the location:
Uploaded with plasq's Skitch!
That's how you know an image is in the Library. If it's in the Library +do nothing with it+.
Move other images to the Folder on the Desktop. Then import them to iPhoto.
Duplicate Annihilator works on images inside iPhoto, so you would use that only after you have migrated to the new machine and imported pics
Regards
TD

HT1338 How do I migrate from G5 iMac (PPC) 10.4.11 to a new Intel iMac?

I am running OSX Tiger 10.4.11 on an iMac G5 PowerPC from 2006. If I upgrade my hardware to a brand new Intel iMac running Mountain Lion as I am considering, how do I best migrate from my old machine to the new, problem free?
I believe that I can't upgrade beyond 10.4.11 on my G5 as it isn't supported so my problem is a dual upgrade/migration one!
I'm also aware that I can't run PPC software on an Intel Mac but I'm really having trouble getting my head around the problem of such a large, combined hardware and OS upgrade! HELP - what do I need to do?? Simple explantions only please!
PS - Apologies if this aimed at the wrong community or it is not presented correctly - it's my first post!
Many thanks,
Len57

Thanks Mende1; I know that PPC apps won't function on Intel machines but I can migrate the Universal apps, right? There is such a large gap between Tiger and Mountain Lion - can I still migrate files directly from one to the other taking the Universal apps as well? Sorry, I'm not very computer savvy!
Len57

Transfer content from old power imac to new intel imac

What are the dos and do nots when transferring the content from my 6 year old power imac to a new intel imac top of the range?
Thanks, Tom

There are caveats migrating from PPC to Intel, I had no problems, but see Kappy's fine/detailed "A Basic Guide for Migrating to Intel-Macs"...
https://discussions.apple.com/docs/DOC-2295

I'm sorry for repeating this, but i have not found a clear answer. i have a macbook wit iTunes library, an iMac, and a time capsule. how can i transfer my itunes library from TC backup to the iMac? thank you -

i'm sorry for repeating this, but i have not found a clear, step-by-step answer in several hours.
i have a macbook with iTunes library, a new iMac, and a new time capsule. how can i transfer my itunes library from TC backup to the iMac?
(sharing the iTunes library between the macbook & iMack requires both machines and seems silly ...)
thank you -

No.

Clarification on migration from iMac G5 running 10.4.11 to new intel iMac

Hello,
Although a lot of you have already posted on this subject, I just wanted to get a clarification, please. I just got a new intel iMac and I would like to transfer all my files from my iMac G5 (10.4.11). Should I just use the Migration Assistant and that's it? Will the two OS conflict with each other? And also, is it possible to continue to use 10.4.11 on my new iMac?
Thank you very much! I hope Ms. Miriam reads this one. She seems to be very knowledgeable!
-Pedro

Not Miriam, but...
You can use Migration Assistant to go from a Tiger Mac to a Leopard Mac. You will be running the Migration Assistant utility on the new iMac. You might employ FireWire Target Disk Mode (on the old iMac) as part of the process, to connect the two Macs.
http://support.apple.com/kb/HT1661
A new iMac has one FireWire 800 port and no FireWire 400 port (which is the type on the iMac G5). So you will need to get a 9-pin (800) to 6-pin (400) adapter, or a cable that has an 800 end and a 400 end (if you want to use the FireWire method for connection). They are available here
http://eshop.macsales.com/item/Other%20World%20Computing/FIR1369AD/
http://eshop.macsales.com/item/Newer%20Technology/1394B96036/
You can also use a wired or wireless network connection between the two Macs, to do the data transfer.
And also, is it possible to continue to use 10.4.11 on my new iMac?
No. Macs can generally run the OS that came with it, or LATER (up to hardware limitations), but not earlier. So if the new iMac had 10.5.6 pre-installed, it cannot run any earlier version of Mac OS X.

How do I transfer my iphoto library from my macbook to my imac easily?

How do I easily transfer my entire iphoto library from my macbook to my iMac? My iMac is not new and I know I should have done this on day 1! I also want to move my itunes. If possible I want to avoid moving in on my external.
Thanks

Details are critical to getting valid advice
The answer to your question is very simple. Connect the two macs together however you wish or use an external hard drive that is formatted Mac OS extended (journaled) and drag the iPhoto library from to old Mac to the pictures folder of the new Mac
However your comment about the iMac being old raises the question of a critical detail you left out. Do you have an existing library on your iMac that you want to keep? If so post back for different instructions
LN

Importing video from Samsung a707 to new Intel iMac

I've got a new Intel iMac with 3 GB RAM, 500 GB HD, and the Nvidia 256 graphics card... and I've just upgraded my cell phone to a Samsung a707, which has a 2 mp chip, and accepts microSD memory cards. With a 1 GB memory chip, it's supposed to be able to take about a one hour video. I can't find a firewire microSD card reader that would let me import the phone's videos into my iMac. It comes with an SD adaptor, so I could use a firewire SD memory reader too, I think. Does anybody have any suggestions about how I can get the videos on the microSD memory card into my iMac, and then edit them with iMovie?
Thanks for your help!
Tim

Your problems may well be down to the way you connect your camera and in which order you establish a connection. If all else fails voltaic will get the files from your camera in AIC which will readily be imported into im08 for editing.

Copying mail Preferences and Library from an eMac to an iMac Intel

I have copied the Preferences and the Mail folder of Library from en eMac to an iMac Intel.
The accounts appears but not the mailboxes I had in the eMac.
Could anybody help me please?

guillermo,
You may have to rebuild the Index. Within the folder <home>/Library/Mail there is a file "Envelope Index". Close Mail and then using Finder, move that file to the desktop and then re-open Mail. This will cause Mail to re-create the "Envelope Index" which will hopefully cause your mailboxes to be visible. If that works then you can move the file "Envelope Index" from the Desktop to the Trash.
Post back with the results.
Chris

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files Tried to do as a backeup t

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files

I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
regards

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

My G5 iMac died how do I move iTunes that I bought to my new Intel iMac

I was able to save the hard drive from my dead G5 iMac and it's now a bootable image on an external firewire drive.
How can I move all my iTunes that I bought to my new Intel iMac?
BTW from what I've read you shouldn't use Migration Assistant when moving from a PPC to an Intel Mac so I don't think I want to go that route.
Any ideas as to how I can do this and not lose all my iTunes that I bought?

i think this should work:
1) boot from the image.
2) use these tips to move the library from the image to another external HD. from the iMac, use the +choose library+ operation below.
or
3) if you have a suitably sized iPod, click here.
or
4) drag & drop the entire iTunes folder to the iMac. put it in the proper location on the iMac in HD/users/your_name/music (overwrite the iTunes folder there - presumably void of any content right now). when done, on the iMac, launch iTunes with the option key pressed. you will see this window
click on +choose library+ and navigate to the +iTunes library file+ (inside the iTunes folder you just dragged & dropped).
any help ?

How can i transfer photos from my macbook to my imac without altering their quality

I am trying to transfer photos from my macbook to my imac, with the same version og iphoto, but it seems that the imac is having trouble to give me clean photos, as if it was putting 2 images, one on the other.... any suggestion for a clean and quick transfer ? and to what may cause that the photos seems blurry ?
thanks
Lau

Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Installing an existing copy of CS3 to new Intel iMac

I want to install CS3 on my new Intel iMac (moving from my almost defunct PPC G5 tower) which will run Snow Leopard.
I understand using the migrate feature may not be a good idea.
Problem is, I have the CS3 upgrade disc. I do have my original CS full version.
Will the CS version install on an Intel Mac? I was planning on installing CS
and then upgrading with my CS3 disk. Will this work? If not please suggest another method.
I have PS7 and CS full install disks and CS2 and CS3 update disks.
Thanks

You should only need the serial number from the version you upgraded from. If you went from CS to CS3 then have the CS serial and disk handy.
I don't remember if the installer wants you to pop the CS disk in for verification or not.
Bob

Transfer Library from PPC to new Intel iMac

Similar Messages

Maybe you are looking for