Transfer master data such as contacts and products from SRM to MDM catalog
Hi! We have a client who is not using PI as their middleware. They are using SRM 7 with SRM-MDM catalogue. My question is: do we definitely need PI in order to distribute product master and contract data to the catalogue? When programs such as BBP_CCM_TRANSFER_CATALOG and MECCM are run, is the data passed on to PI automatically? Or do they just generate an XML file in a designated location which we then use to upload to SRM-MDM Catalog? In this case, I suspect we can use other middleware to handle the upload into the catalog?
Appreciate clarification on the above.
Thanks!
SF
Hi,
PI is required. Mapping is executed in PI.
If you do not want to have PI, you can develop custom extractor and mapping.
Regards,
Masa
Similar Messages
-
Load master data attributes of 0BBP_VENDOR and 0GN_VENDOR in SRM
HI ,
We are in BI Content version 7.04 recently migrated .
I was told to load the attributes of 0BBP_VENDOR and 0GN_VENDOR.But when i collect them in BI content with dataflow before ,i could see only the infoobjects, update rules for 0gn vendor and only info object for 0bbpvendor.
So what could the reason for this or am i missing anything in installing? Please help me with all you inputs and suggestions.0BBP_VENDOR is a Reference Characteristic to 0BPARTNER so it won't have dataflow by itself... Once data is loaded into 0BPARTNER, it will have it too...
0GN_VENDOR is different, that's why you see update rules for it... It loads data from 0VENDOR, if I'm not mistaken... -
TDMS HCM data transfer - no data transferred to receiver and no errors
Hi,
I am experiencing problems with a "Package for HCM Personnel Dev. PD & PA Receiver " for my client who has approximately 800 employees.
I have no errors in any of the phases, and I can see the TDMS SEND and RECEIVER jobs executing during the data transfer. However, the data transfer phase executes for approximately 1-2 minutes but when I check the tables in the RECEIVER the tables (such as HRP1001) are empty.
There are 42 tables selected, and CNVHCM_TR_TAB contains 1533 entries.
Below is a sample from the 'Transfer Selection Criteria' phase:
Transfer Target - System ECR / Client 210
The Transfer Program ran in PA Delete Mode
The Transfer Program ran in PD Delete Mode
Object Type: C // Total number: 5
Object Type: O // Total number: 5
Object Type: P // Total number: 28
Object Type: S // Total number: 31
Table HRITABNR - Time(ms) 10 - Entries 3
Table HRP1000 - Time(ms) 57 - Entries 65
Table HRP1001 - Time(ms) 39 - Entries 158
Table HRP1007 - Time(ms) 38 - Entries 5
Table HRP1018 - Time(ms) 39 - Entries 3
Table HRT1018 - Time(ms) 17 - Entries 3
Table PA0000 - Time(ms) 53 - Entries 47
Table PA0001 - Time(ms) 83 - Entries 76
So I would reasonably assume that if there are no errors anywhere in the Sender, Receiver or the Central system - that table HRP1001 would contain an extra 158 entries or PA0001 would contain 76 entries. This is not the case PA0001 is empty and HRP1001 contains the same number of rows as before the Data Transfer executed.
Has anyone come across this situation before, or got suggestions on troubleshooting the cause of no data transfer when all the phases are green.
Any assistance is appreciated. Regards,, Sheryl.Hi Poonam,
The reason why there is no extra PA* tables above is that this was just a short snapshot of the tables, those tables are included.
I have selected the following for the Data Transfer:
Plan Version = 01
Object Type = O
Object ID = 500383 (Contracts)
Objects Status = All Existing
Evaluation Path = BSSORG
Status Vector = 1
PD Selection tab:
Use Current PD Selections - ticked
Transfer PD Infotypes - 0000 to 9402 - ticked
All other PD values unticked
PD Delete and Target options:
Delete target area - ticked
Target plan version = 01, and transfer 1:1 without change chosen
Root options:
Without new root - chosen
PA Selections
Use current PA selections - ticked
Transfer Master Data - Infotypes 0000 to 9402 - ticked
Transfer Cluster Data - ticked
Transfer Central Person - ticked
Partial cut-off date - 01.07.2011
PA Delete and Target Options
Delete Target Area - ticked
Target PERNR Options - Target range - 700000 to 99999999, maximum number range= 99999, transfer 1:1 without change (chosen)
When I choose CONFIRM ONLINE the only warning messages I receive in the log file is (there are no error messages):
No CP Object Type records will be transferred from the sender system
Table PA3xxxx / PERNI is not registered as being released
Table HRPxxxx / PERNI is not registered as being released
Table PA09xx / PERNI is not registered as being released
Hi Toribio,
When I run the test with PD and PA Authorisation with granularity 04 I get no messages on the next screen. All users have SAP_ALL. SAP_NEW, SAP_TDMS_MASTER, SAP_TDMS_HCM_MASTER plus extra specific HR authorisations for PA and PY.
Thankyou both for your assistance, hopefully we can get to the bottom of this problem.
Regards,
Sheryl. -
How do I transfer, move, back up, upload or whatever the correct terminology is, my contacts and photos from my IPhone 5 to my Windows computer?
You can transfer photos in several different ways:
via USB cord: iOS: Import personal photos and videos from iOS devices to your computer
via Photo Stream: iCloud: My Photo Stream FAQ
via a number of 3rd party apps such as http://www.photosync-app.com
You can transfer contacts via:
iCloud: https://www.apple.com/icloud/features/
iTunes sync: iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
and there may also be 3rd party apps.
Note that you can also backup to iCloud or to a computer, but that is only designed to be used for a restore back to the phone and you won't see usable photos or contacts on the computer. -
Transfer Master Data Rate Routing
Hello Gurus,
We need to transfer Master Data (Rate Routing) with ALE. We already configure the ALE connection. We need to know which is the Process Code in the Inbound Table.
Anyone can help us, please.
Thanks in advance.
Best Regards.Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm
For BOM and materials there are transaction codes...but i could not get for WC and Routing... -
HT201302 how to transfer contacts and massages from iphone to computer
How to transfer contacts and massages from iphone to computer?
Hi, Shahmeer23c
iCloud is useful for a lot of things and backing up your iPhone's data is one of them. Included in the data and files that you can safely keep using iCloud are your contacts. The following instructions detail how to transfer contacts from iPhone to computer.
Step 1. On your iPhone, tap on Settings. On the "Settings" menu, select "iCloud". You will then be taken to the iCloud Settings.
Step 2. Enable the "Contacts" setting and should you be informed that you'll have to merge your contacts to iCloud, tap "Merge".
Step 3. Now on your computer, go to iCloud.com and login with your iCloud credentials.
Step 4. Once you're logged in, click on the Contacts icon to access your address book and all iCloud features for the contacts you've uploaded.
Step 5. In the address book, click on the cog icon at the lower-left portion, click "Select All", and "Export vCard" afterwards.
Step 6. iCloud will then give you a vCard that you can store on your computer. It contains all the contacts you've uploaded to iCloud using your iPhone. -
How to transfer contacts and pictures from iPhone to iPad
I am trying to transfer my contacts and pictures from my iphone 5s to a new ipad air, tried doing it in the icloud by that doesnot work for some reason
If the music was purchased from iTunes then you should be able to copy them over to your computer's iTunes via File > Transfer Purchases (File > Devices > Transfer Purchases if you have iTunes 11 on your computer). If the music came from other sources and you don't have a copy of them anywhere else, then there are some programs listed half-way down this page which might be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For photos taken with the phone then on a PC you can use the windows camera wizard, and on a Mac you can use Image Capture, iPhoto or Aperture : copying photos. To copy photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer. -
HOW TO TRANSFER CONTACTS AND MESSAGES FROM 3G TO 3GS
I BOUGHT NEW 3GS 2012 MODEL 8GB , AND WANT TO TRANSFER MY CONTACTS AND MESSAGES FROM MY OLD 3G 8GB TO NEW 3GS.
OLD 3G IS NOT SUPPORTING TO I CLOUD. HOW CAN I GET ALL MY CONTACTS AND MESSAGES IN NEW 3GS?
THANKS IN ADVANCECan you try first backing up your 3G with iTunes (I guess synching also does this) and then restoring your new 3GS using this backup.
Note that this might delete all other data you have in your new 3GS (if any) and replace it with the data you have in 3G. This might also lower the version of your OS in your 3GS, however you should be easily update the OS if restore becomes successful. -
How do i transfer my contacts and photos from my iphone 3gs to my iphone 4s
how do i transfer contacts and photos from one iphone to another
Do a backup of the old device in iTunes and then restore from backup in iTunes with the new device, if u don't have a computer apple can do it, or ur service provider but service provider can only do contacts
-
How do we transfer contacts and mails from apple mail and address book to Microsoft outlook on my mac
From Contacts, anyway (the new version of Address Book) you can export to a .abbu file and import then into Outlook. I'm not sure about Mail as I only really use Outlook...
Clinton -
TS1347 Need to know how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s
how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s
http://support.apple.com/kb/HT1766
-
Master data loads for Attributes and texts failing
Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
InderHello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder -
Is there an add-on to clearly show that data is being received and transmitted from my PC plus the rate of transfer ?
I take it you are referring to a alternative to Net Usage Extension which is still being maintained and is current for Firefox 3.6.*
See https://support.mozilla.com/en-US/questions/750519
mozillaZine/Sumo mod. -
I am using IOS 5 on iPad2. I am wondering why couldn't I edit the data in my contacts and calendar data?
Movies are not stored in your iCloud account unless you add them in the theater feature of iMovie version 10.
-
Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"
Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx
Maybe you are looking for
-
Getting Dump COMMIT_IN_PERFORM_ON_COMMIT
Hi Experts, I am getting Dump COMMIT_IN_PERFORM_ON_COMMIT in the module pool program. Can you please suggest. Regards, IFF
-
Pivote table report dynamic month year
Hi Gurus, I got a requirement to create an report such that it has to show the last 6 months of this year and pervious year month column with values. It is a trending report to see current 6 months and last year this month to show in one report only.
-
How to recover log , sms , deleted contacts from n...
hi i'am mohamed from egypt i want to recover log from 10/7/2010 to 20/7/2010 recover the sms in this date too or deleted contacts from this date pleas help me soory my english dosent good
-
Ports Required for SMTP access from DMZ
We have a Windows 2000 Adv Server on a DMZ interface of a PIX firewall. We are using native Windows SMTP services as a Front End server for Exchange mail. Our Exchange server has a SmartHost entry that sends outbound mail to the server on the DMZ. Ou
-
How do I print to video HD footage captured from HD Canon HD20?
So far I've not seen any solutions on the discussion threads for those of us who are unsuccessful in printing to video via firewire back to our HD cameras for archive or display on a HD display via HDMI. I have combed the posts in several places for