Transfer material from  quality inspection

Hi PP and QM Guru,i have confusion in QM..when i use Qa32 for UD..after GR from production..the quantity is 40 pc in inspection...after inspection i sent only 10 pc in unrestricted wit QA32 rest 30 pc in quality inspection.
..but when i want to send rest 30 pc with pervious lot..it does not allow to do me...again i try to do manual lot generation..it also does not allow...
now my material 30 pc is inspection....how i will send  this martial to un restricted
kindly suggest me
regards
Akil

Hi,
First goto the tcode ; MD04 and check whther the balance qty is showing in QI, if so take the Lot number and goto Tcode : QVM2 / QA12 and post .
Try using the QVM2 transaction code and post the balance qty which is showing under Inspection.
Hope this will help you.
regards
radhak mk

Similar Messages

  • Moving material from quality to unrestricted

    Hi Experts,
                     We have a scenario where the user has given the UD but the stock posting tab was missing in the QA32 screen, so stock posting could not be done. Now in the stock overview the material is available in quality stock only. We want to take the material to unrestricted stock. Inspection types 01, 08 and 09 are active in material master. Please advise how to proceed? If we try to transfer material from quality to unrestrictedthrough 321 movement in MB1B, we are getting error message "change inspection stock in QM only ". Please advise.
    Regards
    Sm.

    Hi
    08 is Stock transfer
    The QM component cannot manage stock movements for inspection lots that were created manually.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
    This inspection lot is created automatically during stock transfer or created manually ?
    Alagesan

  • QM- Material in quality inspection

    Hi Gurús,
                  Hi Gurús,
                   We have some materials in quality inspection. For each material exist an inspection lot but not an inspection plan.
    I would like to know if there is a way to move the material from quality inspection to unrestricted use, but without creating an inspection plan and recording a use decision
    Regards
    Enzo

    Hi,
    There are 2 possibilities -
    1) If you have activated QM at material master & due to this the material is placed in the inspection lot, then you can transfer the same in QM only.
    2) If you have not activated QM for material, but selected Inspection Lot stock at PO, then you can transfer the material in MB1B by movement 321
    Regards,
    Prashant

  • Movement of Material in Quality Inspection

    Does anyone know a way to move material from one plant code to another and still keep the material in Quality Inspection, blocked or restriced. We are now having to move the material to Unrestricted in order to move it and the mateial has actually gotten to our customers as a result. We want to keep the material in a status that would not allow orders to cut against it but we can move it to other plant codes.

    thanks to everyone for your responses. However, the MB1B will not work in this case. The seniro is this. I have material at an off-site warehouse with plant code ABCD (warehouse managed). The material is in QI there. I need some of the material at the manufacturing site plant code XYZ1. I want to enter a UB transfer order (STO) and not take the material out of QI at ABCD so that the remaining material left in ABCD will remain in QI. The problem is if we have material that is off grade at ABCD and we want one unit sent to XYZ1 for testing we have to take the whole off graded lot out of QI in order to move the one unit. Since the off grade was put in unrestricted it has on occasion gotten out to a customer.
    Edited by: Renee Flatt on Feb 7, 2008 11:00 PM

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Movement of Material from Quality.

    Hi ALL,
    The inspection lot is created with Insp. type "04" ..'Goods receipt inspection from production'...The usage decision as "DEV2" has been  made for the lot...but the qty for offgrade  has been posted to Quality instead of unrestricted. and new insp lot of type '08' is created..for the offgrade..
    On analysis it is found "Post to insp stock " indiactor was not set...So this takes care of all future lots...But for the current lot how to move the material from Quality to Unrestricted...SAP does not allow to carry out UD for the 2nd lot.."08" .
    Your help is required..
    Thanks,
    Regards,
    Ameya K.

    Hi Sriramachandra,
    Thanks for the reply..Actually now two inspection lot exists...one with type"04' whose UD was done as "DEV2" devalue for scrap..and as a result system prompted to enter the Offgrade material ...
    As a result new lot got created with new batch for the offgrade...Now do i have to create insp plan for the offgrade...or is there any other alternative...?
    Thanks
    Ameya k.

  • How to consider sample qty of raw material's quality inspection during mrp.

    hi expert.
    i have to consider sample qty of raw material's quality inspection during mrp.
    i am wondering how to implement it.
    is this possible?
    thank you~~!!

    Hi Seung Hyun,
    I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
    If it is fixed quantity, then there are several alternatives to follow:
    Include the sample quantity to your safety stock
    Create another material number to distinguish the sample from the original raw material number and include it in the BOM
    Regards,
    Julian

  • Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

    Dear Gurus,
    1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
    2 Effect of Financial Entries eg Cost ?..
    Thanks & Regards
    Darvesh

    Hi Shoib,
    Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
    2 Effect of Financial Entries eg Cost ?..
    Sol:  1  ans is No. You Can not  transfer a 1500 material  from quality to unrestricted stock, Cause  the  Transfer of material is based on Either  PO or material doument
         If you  still want to do it  Chek with your ABAper to  develop a BDC  wich can transfer the material and or each PO  it should crreate a Accounting Document

  • Batch from quality inspection to unrestricted use.

    Hi everybody
    Someone can help me with the following problem?
    I made a good receipt for order with a movement type 101. We are using the QM module, then with the movement type 101 an inspection lot is generated, consequently the amount entered is place in quality inspection. For any reason the inspection lot was not generated or this was canceled. My problem is that, now the amount entered is in quality inspection and there is not a lot inspection to move the amount from quality inspection to unrestricted use.
    I tried use a movement type 102 (transaction MB31) but the system send the message that the movement must be done only with QM transaction. The same message was sent when I tried to cancel the material document (MBST).
    Someone know how I can create an inspection lot or how I can move the amount from quality inspection to unrestricted use?
    Thanks in advance.

    hi carlos
    if you create an inspection lot manually you cannot able to post the stock ( since a manual inpsection lot is not stock relevant) better thing is try to figure out why inspection lot is not genereated and solve it
    i think if the inspection lot is not generated it will show some message during MIGO itself.try to find the inspection lot using QA32 and specify the material and select Select all inspection lot
    regards
    thyagarajan

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • Transfer material from Valuated project non valuated project

    Hi Experts,
    While i am trying to transfer material from Valuated project stock to Non valuated project with T.Code MB1B movement type 415 'Q', I am getting following error.
    WBS element  has different inventory valuation
    Message no. CN769
    Diagnosis
    The project definition for WBS element  only allows the following stock control:
    No project stock
    No project stock with defined valuation M
    ' ' = non-valuated project stock
    'M' = valuated project stock
    System Response
    Account assignment not possible.
    Procedure
    Change the settings for the project stock in the project definition (Control tab) or use a suitable WBS element.
    Kindly suggest me how to trafer material from Non valued project stock to valuated project stock.
    Regards

    Actually, you sohuld not be transferring stock to non-vlauated proejct directly. In case of non-valuated project, stock is never valuated while in case of valuated project it is valuated. So there is basic difference in valuation method. This will create inconistency if you attempt ot transfer it directly.
    You should rather transfer this stock to general stock and then transfer to non-valuated project stock.
    Regards,
    Mahendra

  • Transfer Material From Vendor to Vendor

    Please can anyone  explain material can transfere from vendor to vendor....Thank you ....Raveendra

    Hi,
    What do you mean exactly by transfer material from Vendor to Vendor?
    Are these your materials provided to Vendor?
    Or are you referring to Consignment?
    Anyway, please have a look below.
    1) Go to MIGO_TR t-code
    2) Set it to Transfer Posting A08, Other R10
    3) Use movement type 542 to transfer from Vendor to our warehouse in storage location
    4) Use movement type 541 to transfer from the receiving location in step 3 and transfer it to the new Vendor.

  • STO to transfer material from Stor.Loc. 0001 to 0002 under the same Plant

    Dear friends ,
    Does anyone already have used the new functionlity to transfer material from Storage Location 0001 to Storage Location 0002 under the same plant  with STO ?
    Which delivery  and movement type should I use to do that ? we put a mov. type 311 but errors appear for us.
    best regards,
    Alessandro

    Hi Alessandro,
    You can very well create an STO keeping the issueing and receiving plant as same and mentioning the issue S.location and do the DO using VL10B and PGI using VL02N.
    at the time of GR you can specify the receiving S.location and post the GR.
    There is no any requirement for specific config.
    Regards
    Merwyn

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • Transfer material from Storage location to Storage type.

    Hello,
    At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
    we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
    Client want to differentiate these two samples, so we have created two storage types.
    Now My question is " can we transfer the samples in different storage types from Storage location.
    This is the QM and WM integration.
    Please advice
    Thanks in advance.
    Regards
    Anil

    Hello Anil
    I don't think you can transfer from storage location to storage type.
    If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
    If you want you may also set up 2 different physical sample locations: That would be ideal.
    SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
    SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
    SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
    On the application side you may use the sample management procedures to deal with samples. See the following link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
    Does that work? Let me know.

Maybe you are looking for