Transfer Memo from BlackBerry Z10 into BlackBerry 9320

Hi All,
Kindly please need your help,
i would like to ask how to transfer memo/remember into blackberry 9320.
Thanks,
Anggoro

Xilisoft makes some handy programs, maybe this one will help:
http://download.cnet.com/Xilisoft-iPhone-Transfer/3000-18551_4-10957926.html
It's always funny when it's someone else.

Similar Messages

Must-know BlackBerry Z10 and BlackBerry 10 tips and tricks

Check out the following must-know BlackBerry Z10 and BlackBerry 10 tips and tricks to get the most out of your new BlackBerry 10 smartphone.
1) BlackBerry 10's Built-In Screen Shot Feature
Capturing a screen shot on a BlackBerry 10 device is simple. Just hold both the volume up and volume down keys simultaneously for a couple of seconds until you hear a shutter sound. Screen shots are saved to your BlackBerry 10 camera gallery.
2) Volume Up/Down Keys as Media Controls
You can use your BlackBerry 10 device's volume up and volume down keys to skip through songs in your music librery. To enable this feature, open your BlackBerry 10 Settings by dragging down from the top of your display while on your Active Frames screen or a home screen panel. Choose Settings from the dropdown menu and click System Volume. On the following page, slide the Music Shortcuts button to the On position.
3) Volume Up/Down Keys and the BlackBerry 10 Camera
You simply tap your BlackBerry Z10's display with the camera or video camera open to snap an image or start recording a video clip. But it's sometimes easier to use the volume keys. Just tap the volume up or volume down keys with the camera open to snap and image. And you can also use these keys to start and stop video capture when your camera's video mode is enabled.
4) Instantly Launch Voice Control
The BlackBerry Z10 can initiate lots of different actions based on voice commands thanks to its Voice Control app. And you can instantly launch Voice Control by holding your device's mute key for a couple of seconds.
5) Launch BlackBerry Camera from Lock Screen
BlackBerry 10 lets you quickly launch your camera application from its lock screen, a feature that can be valuable when you want to take spur-of-the-moment shots. A camera icon appears in the bottom-right corner of the locked display screen, and you can hold it for a couple of seconds to launch the camera app.
6) Advanced BlackBerry Hub Inbox Controls
The BlackBerry Hub is the central inbox for all of you various BlackBerry 10 application notifications and messages. You can access basic Hub controls by clicking the Menu key at the bottom right of your Hub screen. (The Menu key looks like three dots stacked on top of each other.) But you can also access some advanced BlackBerry Hub controls from the date bars that appear in the inbox stream at the start of each new day.
Just hold a finger on a date bar to bring up controls that let you skip to the start of the past day, the start of the next day, jump to the top of the BlackBerry Hub, jump to the bottom of your BlackBerry Hub or mark all prior messages as read.
7) Speedy BlackBerry 10 Navigation
The BlackBerry 10 OS can be broken down into three main components: The BlackBerry Hub; the Active Frames screen; and your application panels. You can do navigation through these components using a basic set of swipes and gestures. But you can also use the tiny slider tray that appears at the bottom of the Active Frames screen and all of your home panels. Just tap a specific panel in the slide to navigate directly to that panel without scrolling. Touch the Active Frames square, which is composed of four smaller squares, to jump directly to your active apps page. Or tap the Hub button, which looks like three horizontal lines on top of each other, to navigate right to the Hub.
8) See Your Battery Life Status as a Percentage
The BlackBerry 10 OS does not currently allow you to set your battery-status indicator to show a specific percentage, only a battery icon. But you can check your device's hardware settings for a more specific battery status. Just open your device's Settings by sliding down from the top of your Active Frames or application-panel screen and choose Settings from the dropdown menu. Then click About. On the following screen, change the Category menu from General to Hardware. You'll see a battery percentage listed in the Hardware information.
9) BlackBerry 10 Boot Status as a Percentage
Whenever you restart or power up your BlackBerry 10 devices, a BlackBerry logo appears with a status bar that encircles it. The status bar shows you start-up progress, but you can also view that progress as a percentage number. Just hold your finger anywhere on the BlackBerry logo and a progress percentage appears.
10) BlackBerry Z10 Keyboard Tips, Tricks and Shortcuts
You can type special characters using the BlackBerry 10 virtual keyboard by holding your finger on top of a letter with associated special characters (e, a, i, o, u, y, etc.), and then sliding your finger over to the character of your choice.
Quickly sliding your finger downward from the top of your keyboard to its bottom cycles through the number and character screens so you don't have to tap the number/character screens button, which can slow down typing.
And you can delete an entire word instead of just individual letters by swiping leftward from the backspace key toward the center of your keyboard.
Click Her to know more

This could of been posted by JSanders already in his thread!
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

BlackBerry Z10 vs BlackBerry Q10: Which phone is the best choice?

Device
Z10
Q10
Display
4.2-inch, LCD, resolution of 1280 x 768 pixels, and 356 pixels per inch
3.1-inch, S-AMOLED, resolution of 720 x 720 pixels,
and 330 pixels per inch
Processor
Dual-Core 1.5GHz – Snapdragon S4 Plus
1.5 GHz dual-core QualcommMSM8960
Memory
2 GB of RAM
2 GB of RAM
Storage
16 GB internal; MicroSD card slot for expandable storage up to 64 GB
16 GB internal; MicroSD card slot for expandable storage up to 64 GB
Camera
8MP rear camera, 1080p HD video recording, and 2MP front-facing camera that records 720p HD
8MP rear camera, 1080p HD video recording, and 2MP front-facing camera that records 720p HD
Platform
BlackBerry 10 (10.1 update still rolling out)
BlackBerry 10.1
As you can see from the chart above, the BlackBerry Z10 and BlackBerry Q10 are almost identical when it comes to specs. wever, I found the Q10 offered a better quality screen that also provided more impressive viewing angles. This is due to the Z10’s lesser quality LCD Disply that only pumps out a resolution of 1280 x 768 pixels, while the Q10’s S-AMOLED 720p screen flourishes above.
In the end, I came to the conclusion that the handset that appeals to the larger majority of smartphone customers is the Z10. This device represents what people are accustomed to in the year 2013, while the Q10 appeals to a shrinking customer base that prefers a physical keypad over a virtual one.

Q10 vs. Z10 is a highly personal choice. As you pointed out in the specs the basic internals are identical. It comes down to full touch screen vs. physical keyboard. For a traditionalist like me it's the Q10 FTW. But then I cut my teeth on BlackBerrys all the way back to the 7230 model. BlackBerry's outstanding physical keyboard is ingrained in my DNA by now. I've also used Android phones and an iPhone so I'm no stranger to the full touch screen, and I even got used to the on-screen keyboards with that form factor. But the Q10 for me has just enough of a screen that I don't miss the full size screen too much, and it's more than compensated for by the keyboard I love so much.
The best choice is to have them both! But if you must pick one, best to go to a store and try them both out for as long as the sales reps will tolerate you.

Can I transfer memos from android to new iPhone?

Can I transfer memos from samsung galaxy to iPhone 5s?

There should be more than one way to achieve it.
http://www.imore.com/how-transfer-data-android-new-iphone-5s-or-iphone-5c
Follow this guide may help you to transfer data from Android to iPhone.
It supports iPhone 6 and 6 Plus.

Transfer Data from Palm OS to BlackBerry 10 Smartphones - US

(I am Posting this a 2nd time because I'm not sure it went through the first time; got some kind of authenication error message.)
- 1. What is the best way to transfer my PIM Organizer Data from my Palm TX to a BlackBerry Z10?
- 2. How do I obtain the standalone BlackBerry Desktop Software, latest Build of v.6.1? or even a version later than 6.1? or should I obtain v.5.0.1? or v.4.7?
I am currently a U.S. Cellular customer and when they make the BlackBerry Z10 available, I plan to switch from my Motorola feature phone to the Z10. I currently also use a Palm TX PDA (Palm OS Garnet v.5.4.9) and use Palm Desktop Software v.4.2 ( = the CD installation version of
v.4.1.4e?) on a Windows XPmachine. I could upgrade the Palm Desktop to v.6.2.2, but I haven't because v.4.2 on Windows XP is working well for me.
The support page for Z10, Transfer from iPhone & Android to BlackBerry 10 Smartphones - US ( http://us.blackberry.com/support/transferring-to-bb10-device/personal.html ) implies that it does not support direct transfer from Palm OS to BB v10; only transfers from Androids and iPhones, as well as from other BBs, are supported. I have searched your Knowledge Base and found several articles that tell me how to migrate my PIM data from Palm OS to earlier versions of BlackBerry. I then presume that once I have my data imported into the earlier version of BB Desktop I can then later import it into the BB10 Desktop software; am I correct?
Here are the Knowledge Base articles I found:
1. Article ID:
KB03050 ( http://www.blackberry.com/btsc/KB03050 ) - How to transfer contact information from a Palm OS device to a BlackBerry smartphone
2. Article ID:
KB04346 ( http://www.blackberry.com/btsc/KB04346 ) - Field mapping list for the PIM Data Migration Wizard
3. Article ID:
KB04437 - ( http://www.blackberry.com/btsc/KB04437 ) How to use the organizer data migration wizard
4. Article ID:
KB05421 - ( http://www.blackberry.com/btsc/KB05421) What is the Switch Device Wizard?
The four articles all give slightly different advice, but
Articles # 2 & 4
imply that I can export the PIM data from Palm to BlackBerry Desktop Manager
v.5.0.1
and seem to have the most simple and clear instructions. However,
Article #3
implies that I should use BB Desktop Manager no higher than
v.4.7
, and
Article #1
implies that I can use BB Desktop Software as recent as
v.6.1
and use "Method #2", which seems very long and complicated by transferring data to
Microsoft Outlook
as an intermediary step!
So I am confused as to which method to use.
Articles #2 & 4 & BB Desktop software v.5.0.1 seem the simplest, but if I need to use the latest possible version, 6.1 with Outlook as an intermediary to get superior results, then I am willing to follow this more complicated method as described in article #1. I want to use the method that will give me the best results with the lowest error rate, even it may be the most complicated way.
... Help!
P.S.
I also use
Agendus for Windows Palm Desktop Edition v.5.42( http://www.iambic.com/agendus/winpded/):
"Agendus for Windows is an application that enhances how you view your calendar, contacts, tasks and memos. It also provides intuitive tools, such as text capturing, a free time finder, voice recording, advanced search capabilities and Internet features (weather, driving directions, address lookup). All of these things help in make scheduling extremely easy and hassle free."
It can form hypertext links between the separate databases of the Palm Desktop (calendar, contacts, tasks and memos) so you can flip back & forth between the databses without having to close one before you open the other.
There's also an
Agendus for BlackBerry version (
http://www.iambic.com/agendus/blackberry/
), but was developed pre-BB 10, and I think the code is sufficiently different between the BB and Palm versions, that I don't think it is easy to transfer data between them since the BlackBerry version synchronizes with Agendus for Windows Outlook Edition ( http://www.iambic.com/agendus/winoued/).
When I transfer my PIM data from my Palm to a BB-Z10, will I be able to keep those active hypertext links in Agendus in the transfer and still have them work?
P.P.S.
I also have
Palm Desktop by Access v.6.2.2 ( http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/solutions/article/32859_en.html )installed on a Windows 7 machine, but I find that v.4.2 w/ the Windows XP machine tends to work better. However, I am willing to use whatever combination of Palm Desktop version together with Windows OS version that will get me the best and most accurate results. Palm Desktop v.6.2.2 also has an extension called Palm Conduit Switcher Application (OutlookSwitcher.exe v.1.3.0, which is accessible through Start > Palm > PIM conduit sync > Sync with Outlook) which supposedly will change my Palm handheld to sync w/ Outlook instead of with Palm Desktop; would that accomplish the same thing as Article #1 (ID: KB03050 > Method 2 > Tasks 1,2 & 3) and maybe be easier or do it better? But it would seem that the KB03050 method would leave my Palm Desktop intact, whereas the OutlookSwitcher application could delete my Palm Desktop in a process that would convert my data permanently to Outlook; am I correct? An earlier version of OutlookSwitcher.exe also is included in Palm Desktop v.4.2.
There are so many questions and options for me, I don't know which way to go! If you and your colleagues don't know the best way either, then I will most likely follow the advice in KB03050 in conjunction w/ upgrading my Palm Desktop to 6.2.2 on my Windows XP machine, since I would have the most control over datafield mapping, and the extra work spent doing that may pay off with a smaller error rate after the transfer, which gets me back to my second question at the top of this article: How can I obtain a copy of the latest Build of BlackBerry Desktop Software v.6.1 as a stand-alone application into which I can transfer all my PIM Data first, *before* I install & syncronize the new BB10 phone? Or should I use a version later than 6.1?
Sorry for this being so long and convoluted, but after going through all the permutations and combinations, it should be obvious to you that I now need the support of someone more expert and experienced in this before I do anything else. Thanks!

Hey telemarkdoc,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Currently you can not transfer data from a Palm smartphone to a BlackBerry 10 smartphone through BlackBerry Link. Also previous versions of BlackBerry Desktop Software will not work with BlackBerry 10 smartphones.
The only way this could work is that you transfer the information from the Palm software to Microsoft Outlook and then BlackBerry Link can synchronize the contacts and calendar information to the BlackBerry Z10.
I hope this helps.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Transfer Contacts From BB Z10 to Q10

Hi...
How can transfer all contacts from BB Z10 to Q10 (With Out blackberry link )
Pls Help me

How are your contacts on the Z10 loaded and where did they come from?
Are they connected (synced) via an email account?
Details help.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Transfer Memos from Pallm Desktop to Palm Pre 2 (Verizon)

Any ideas how I can get my memos from my Plam Desktop to my new Pre 2. I own Companion Synchronize, but I don't believe it supports the phone yet. Thanks.
Post relates to: Pre 2 p102eww (Verizon)
This question was solved.
View Solution.

I had to gget the atest fersion of Palm desktop. Then I had to create a new temporary user and copy the memos under my regular user name to the temporary user name. I then used the Data Transfer Assistant (connecting to the Pre 2's usb drive mode) to transfer the memos to my phone.

HT2729 Steps to transfer music from flash drive into iTunes library.

What are the steps to transfer music from a jump drive into iTunes library? I am not finding where to drag a song off my jump drive and onto my iPhone.

You can't drag it from a jump drive to your phone. You can drag it from a jump drive to iTunes on your computer then sync your iPhone.

How to transfer app from my pc into itouch?

How do
you transfer app from pc into an itouch?

You'll have to use iTunes, see this article: Syncing applications from the App Store
or this one: Overview of syncing iPhone or iPod touch with your computer

Blackberry Z10 issues Blackberry World

I cann't open the app world
http://www.youtube.com/watch?v=cCCXeh4nlkg

Close BlackBerry World.
Open the Music or the Games application.
Select the 3 dots icon in the bottom-right of the screen
Select BlackBerry World.
Now, your BlackBerry World icon shoud work.
Detail: BlackBerry World displays a spinning circle and does not load content on the BlackBerry Z10 smartph...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How I can transfer data from the database into a variable (or array)?

I made my application according to the example (http://corlan.org/2009/06/12/working-in-flash-builder-4-with-flex-and-php/). Everything works fine. I changed one function to query the database - add the two parameters and get the value of the table in String format. A test operation shows that all is ok. If I want to display this value in the text area, I simply drag and drop service to this element in the design mode
(<s:TextArea x="153" y="435" id="nameText" text="{getDataMeanResult.lastResult[0].name}" width="296" height="89" />).
It also works fine, just a warning and encouraged to use ArrayCollection.getItemAt().
Now I want to send the value to a variable or array, but in both cases I get an error: TypeError: Error #1010: A term is undefined and has no properties..
How can I pass a value from the database into a variable? Thank you.
public var nameTemp:String;
getDataMeanResult.token = authors.getDataMean(arrayOfNumber[0], dir_id);
nameTemp = getDataMeanResult.lastResult[0].name;
public var nameArray:Array = new Array();
for (var i:uint=o; i<3; i++){
getDataMeanResult.token = authors.getDataMean(arrayOfNumber[i], dir_id);
nameArray[i] = getDataMeanResult.lastResult[0].name;
And how i can use syntax highlighting in this forum?

Astraport2012 wrote:
I have to go back to the discussion. The above example works fine when i want to get a single value of the database. But i need to pass an array and get an array, because i want to get at once all the values for all pictures tooltips. I rewrote the proposed Matt PHP-script and it works. However, i can not display the resulting array.
yep, it won't work for Arrays, you'll have to do something slightly more intelligent for them.
easiest way would be to get your PHP to generate XML, then read that into something like an ArrayList on your HTTPService result event (depends what you're doing with it).
for example, you could have the PHP generate XML such as:
<pictures>
     <location>test1.png</location>
     <location>test2.png</location>
     <location>test3.png</location>
     <location>test4.png</location>
     <location>test5.png</location>
     <location>test6.png</location>
</pictures>
then you'll read that in as the ResultEvent, and perform something like this on it
private var tempAC:ArrayList = new ArrayList
protected function getStuff_resultHandler(event:ResultEvent):void
    for each(var item:Object in event.result.pictures)
       var temp:String = (item.@location).toString();
       tempAC.addItem(temp);
in my example on cookies
http://www.mattlefevre.com/viewExample.php?tut=flash4PHP&proj=Using%20Cookies
you'll see an example of how to format an XML structure containing multiple values:
if($_COOKIE["firstName"])
        print "<stored>true</stored>";
        print "<userInfo>
                <firstName>".$_COOKIE["firstName"]."</firstName>
                <lastName>".$_COOKIE["lastName"]."</lastName>
                <userAge>".$_COOKIE["userAge"]."</userAge>
                <gender>".$_COOKIE["gender"]."</gender>
               </userInfo>";
    else
        print "<stored>false</stored>";
which i handle like so
if(event.result.stored == true)
                    entryPanel.title = "Welcome back " + event.result.userInfo.firstName + " " + event.result.userInfo.lastName;
                    firstName.text = event.result.userInfo.firstName;
                    lastName.text = event.result.userInfo.lastName;
                    userAge.value = event.result.userInfo.userAge;
                    userGender.selectedIndex = event.result.userInfo.gender;
depends on what type of Array you're after
from the sounds of it (with the mention of picture tooltips) you're trying to create a gallery with an image, and a tooltip.
so i'd probably adopt something like
<picture>
     <location>example1.png</location>
     <tooltip>tooltip for picture #1</tooltip>
</picture>
<picture>
     <location>example2.png</location>
     <tooltip>tooltip for picture #2</tooltip>
</picture>
<picture>
     <location>example3.png</location>
     <tooltip>tooltip for picture #3</tooltip>
</picture>
etc...
or
<picture location="example1.png" tooltip="tooltip for picture #1"/>
<picture location="example2.png" tooltip="tooltip for picture #2"/>
<picture location="example3.png" tooltip="tooltip for picture #3"/>
etc...

TS3212 How to transfer everything from iPhone back into ITunes?

I bought a new laptop the other day. and now I want to transfer everything from my phone to the new ITunes. How can I do that??? including all music and apps.
Please HELP!!!

See Recover your iTunes library from your iPod or iOS device.
tt2

I cannot transfer voice memos from iPhone 4 into iTunes 11.1.5

I was able to transfer voice memos until the 2th of March 2014, but then I have three other memos I want to transfer into iTunes and I can't, I have tried everything... any sugestions???

Hi,
The only way I found with my version of iTunes (11.1.1.11) is the following:
- select your device (mine was an iPod Nano 6G)
- in the options, select the activation of the device as an hard disk
- on your computer, navigate to the Apple device and select the folder "Recordings"
When here, you get the files, you can copy and paste or drag and drop where you want.
Ph.

Log and transfer footage from Panasonic GH1 into FCE

I have already read the few threads discussing importing AVCHD video from the Panasonic GH1 camera into FCE. I was expecting that the 1080x24 (wrapped in 60i) would import OK but the 720x60p would not. However, so far, I have had both formats import using the log and transfer just fine. These have been only short clips roughly a minute or less in length but no sign of FCE crashing when importing the 60p footage.
So, is this considered normal or has something in the most recent OSX updates fixed this FCE capability?

The program is usually able to ingest 24p and 60p footage fine, but upon exporting it will be conformed to the frame rate of your sequence. Since FCE doesn't support custom sequences all exported movies are either in 29.97fps or 25fps. Problems also sometimes arise where the program interprets your footage as 29.97fps instead of what it actually is, causing the audio to drift a bit as well.
Better to stick to what the program supports: 50i/25p and 60i/30p. If you need the functionality of 24p or 60p you should upgrade to Final Cut Pro.

My hard drive crashed - can I transfer songs from iPod back into iTunes?

My computer's hardrive crashed and I had to replace the entire hardrive. (Grrrrrr!) I lost the folder that contained all of my music. I re-downloaded iTunes onto my computer with the new hard drive but now my library is empty. All my songs are still in my iPod...
Is it possible to do a "reverse" transfer. In other words, put the songs from my iPod back into my iTunes. If so - HOW?
I'm afraid to hook up my iPod to my computer because I don't want the automatic upgrade to start and then my iPod will be empty too.
Please send help!
Dell Computer Windows XP 2003 iPod Photo
Dell Windows XP
Dell Windows XP

As iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. When you connect you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it.
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box: Managing Your Songs Manually
You can't sync or drag your music back directly from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs but not playlists back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
iGadget Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are quite cheap these days and you can get loads of storage for quite a small outlay.

Transfer Memo from BlackBerry Z10 into BlackBerry 9320

Similar Messages

Maybe you are looking for