Transfer mobile...could not pair.

Hi....I have transfer mobile on my Samsung Express and my Z2.
I set them up correctly....sender/reciever.
I enter the code generated by reciever phone to the sender phone.
The sender says connecting. I get an "accept" message on the reciever phone (Z2)
Then the sender phone (Samsung) says " could not pair. Try again later".
I have ....6 times!

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to restart both devices? 
Does Bluetooth work fine otherwise in your old device? 
If you can't pair the devices you could use Xperia transfer in PC Companion instead: 
http://www.sonymobile.com/global-en/tools/pc-companion/
What are your thoughts about this forum? Let us know by doing this short survey.

Similar Messages

  • I could not pair my bluetooth device with my ipad mini retina display. Is there anyone facing the same problem?

    I could not pair my bluetooth device with my ipad mini retina display.
    My ipad could not detect the bluetooth device. I do not facing this problem with my iphone and my older ipad on the same bluetooth device.Is there anyone facing the same problem?

    Yes I tried pairing with my bluetooth car hands-free set - Not discoverable.
    I tried to pair with my bluetooth headset - Also not discoverable.
    I have no problem with my other apple products my older ipad2 and my current iphone5.
    Just this ipad mini retina display could not discover the above bluetooth device.
    Any idea on how to solve this? Thnaks.

  • I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

    I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

    Bluetooth: How to set up your Apple Wireless Keyboard

  • "Connecting to Motorola H500" and then "Could not pair."

    Here's my problem...my iPhone starts searching for devices, it finds my bluetooth device, then it asks me for the pin number, then it says it's trying to connect to it and then it tells me: "Could not pair with Motorola H500." Just last night (after the 2.0 update) it worked perfectly fine and I was able to make calls using my bluetooth device, so what happened? Anybody have an idea why it won't pair with it? Help, please!

    You need to set your H500 into "discovery mode" also:
    From the Off status, hold its button down for about 10 seconds until you see a sold blue light, then go to the iphone's Bluetooth settings do the pairing.
    My iphone automatically paired without having to enter the H500's default PIN "0000".

  • Transfer Structure Could not be Collected

    I am trying to activate some Business Content (CO-OM-CCA Costs & Allocations).
    In the “<b>Select Object</b>” Popup, after selecting the required object and I am pressing the “Transfer <b>Selection</b>”. Now I am getting the errors as below
    <i>1) Object 0VALUATION_TEXT               D6B100PCC (Transfer Structure,ISTS) could not be collected for object 0VALUATION_TEXT        D6B100PCC (Transfer Rules,ISMP)
    2) Object '0VALUATION_TEXT               D6B100PCC' (ISTS) of type 'Transfer Structure' is not available in version 'D'
    Message no. RSO252</i>
    This error is coming even I try to activate some DEMO Content (CO-PA Demo Cube).
    I am Grouping the objects with the Option “<b>In Dataflow Before and Afterwards</b>” with Collection Mode as “<b>Collect Automatically</b>”
    I am following the SAP Best Practices - BW Scenario
    https://media.sdn.sap.com/html/submitted_docs/Best_Practices/BW/html/index.htm
    Your help will be appreciated

    Hi Nathan,
    Make sure the objects are active. If so, then goto the infosource -> Extras (from menu) -> Object directory.. -> Transfer rules -> assign the package and it would ask for transfer structure later so assign the package to that as well.
    Bye
    Dinesh

  • ADF Mobile : Could not find property inputvalue in class java.math.BigDecimal

    I tried to add an input text item to the list view like below and received an error message while navigating out of the input text field.
    "Could not find property inputvalue in class java.math.BigDecimal".
    Can someone show me some pointers about what is wrong with the below code.
    JDEV Version : 11.1.2.4
    <amx:listView var="row" value="#{bindings.Empdtls.collectionModel}"
                            fetchSize="#{bindings.Empdtls.rangeSize}" styleClass="adfmf-listView-insetList"
                            id="lv1" editMode="true">
                <amx:listItem id="li1">
                  <amx:tableLayout width="100%" id="tl1">
                    <amx:rowLayout id="rl1">
                      <amx:cellFormat width="10px" id="cf3"/>
                      <amx:cellFormat width="60%" height="43px" id="cf2">
                        <amx:outputText value="#{row.ClassCode}" id="ot3"/>
                      </amx:cellFormat>
                      <amx:cellFormat width="10px" id="cf4"/>
                      <amx:cellFormat width="40%" halign="end" id="cf1">
                        <amx:inputText value="#{row.bindings.Salary.inputValue}" simple="true" id="it41"/>
                      </amx:cellFormat>
                    </amx:rowLayout>
                  </amx:tableLayout>
                </amx:listItem>
              </amx:listView>

    Hi,
    #{row.bindings.Salary.inputValue) doesn't access a binding in ADF Mobile. Use #{row.Salary} instead.
    Frank

  • Can not pair iPhone with iPad via bluetooth

    Usually, I use my iPhone 5 to control Keynote in my iPad mini. After I updated iOS 8 my iPhone could not pair with iPad via Bluetooth anymore. I have been reset network and all setting but it still be the same. Now I updated iOS 8.1.1 to both device but Bluetooth can not find each other and pair them. How can I do?

    http://support.apple.com/kb/HT4517
    Bluetooth is not supported for file transfer
    You can pair to tether.
    You have to use USB

  • HT201210 iphone could not be restored error no 1015

    iphone could not be restored error no 1015
    massege recieved while updating
    mobile could not start

    Search!!!!!!
    http://lmgtfy.com/?q=iphone+error+1015

  • My iPhone will not pair with any devices on bluetooth, help?

    I can't seem to pair my iPhone 4 with any other phones or devices.

    PAISLEYSAINT
    I have a THB Bury car phone cradle specific to the iPhone 4 which was working fine until I updated to iOS 5.1.1 - my phone will no longer pair with it or recognise it or any other Bluetooth device !
    I carried out a full reset and relaunched the phone as if it were new - no success
    I took the phone to the appple store and one of the Geniuses looked at it for me. He told me it was not designed to 'discover' other BT devices after he paired it with his MacBook but could not pair the devices in the opposite direction - i.e my phone to the MacBook. I thought this strange that the premier smart phone on the market should not have this function especially when it previously worked well.
    He also carried out a full reset which is deeper than the one you can do at home - no success.
    The genius would not accept that this was a fault and claimed not to be aware of any issues but offered to have it repaired for around £116 !!!
    Incidentally my phone is just outside its  warranty and his phone would not pair up either when I asked him to check.
    THis is useless to me !! I understand Apple don't want to support BT function that allows it customers to send files between devices but come on ! My £90 BT car cradle kit is now useless and cannot be paired via my iPhone.
    I now really have to consider using a smart phone that will work.
    I love apple stuff and currently own no less than four different devices and was considering a new mac but not now. I feel let down by apple.
    DIssapointed !:-(
    iPhone 4, iOS 5.1.1
    I have this question too (0)
    Reply
    Categories: Wi-Fi, 3G and Bluetooth Tags: none (add)

  • Could not detect device

    tried to set up new devices - mouse and keyboard
    but the setup could not detect them.
    please advice.

    I successfully set up the Apple wireless keyboard and mouse on my PowerMac G5 (using an adapter) but my G4 PowerBook (built-in BT) could not pair either of them. The PowerBook did link up with the G5, but not the devices. Any suggestions from anyone? Thanks.

  • I can not pair my ipad with my iphone 5s

    I recently bought an iphone 5s and I could not pair it with my ipad (4th generation). I went to settings in each device, turn on  blue tooth and made both devices visible, but they can not connect.  Both devices has the OS updated.  Both devices were bought in an athorized dealer.  Thanks

    No, with Apple devices, life is different.
    If you're trying to keep calendars, contacts, notes in sync, consider using iCloud as described here:
    http://support.apple.com/kb/HT4436
    Apps are automatically available to both devices.
    You can keep the music in sync by using iTunes Match should you desire, or simply iTunes on your computer.
    You can use iTunes on your computer as a repository to sync your devices.

  • I can not pair my iphone with Powerbook Pro 10.6.8

    I could not pair my iPhone 4 with Powerbook Pro 10.6.8 using Bluetooth. The code # is displayed, but refused.

    I am not familiar with the Mini bluetooth system, but in most cars there is a possibility to enter it to see what it was paired to. In that menu delete all earlier devices that it was paired to. Set the bluetooth in the iPhone to off, then to on again, and then let iPhone and car search again: probably they will find each other again and then type the pairing codes.

  • Mac Pro did not paire With Bose Sound Link!

    COuld not pairing Bluetooth between Mac Pro and Bose Sound Link?

    I forgot to mention that I followed the same instructions that did solve the problem.
    The things I tried were:
    1. turning off wi-fi
    2. closing all apps
    Doing this however did not solve my problem either.
    Chris

  • Could not activate mobile data network - iPhone 3GS

    Hi, I really need some help please.
    Last week I started to get this message everytime I tried to use internet services, email, web or apps. I was on 4.1.2 and the phone was officially unlocked and running a T-Mobile sim with auto-update carrier file installed.
    I reset the phone, restored it and never worked, subsequently, I have done this many times, reset network settings, hard reset, soft reset and I eventually upgraded to 4.2.1. This still never solved the issue.
    After countless restores and resets and iTunes updating the carrier files, nothing is working. I contacted T-Mobile who said there are no connectivity issues, must be the handset. I then contacted Apple who advised the handset is out of warranty and an 'out of warranty' repair will cost minimum £146.
    The phone works fine calling, messages and on Wi-Fi it's only internet services that do not work. Is there anything else I can try or has anybody experienced the same problems?

    Thanks for the advice. That was one thing I hadn't tried purely becuase it is such a pain in the ***. I reset the phone and set it up as a new one and bingo, it worked fine. I then went to restor from backup, after which, same issue, Could not activate mobile data network, so another reset and now I'm pretty furious that all my phone contacts, apps and messages have all gone.
    Next question would be how to transfer phone contacts from phone to sim. I have lost all new numbers that have gone into the phone for the last year, so if I reset again, restore from backup, transfer numbers to sim, then reset again and set up as new phone I should be able to recover numbers at least.
    <Edited by Host>

  • HT204053 iPad will not pair up with wth my Samsung S3 mobile, can you help?

    iPad will not pair up with wth my Samsung S3 mobile, can you help?

    File transfer via Bluetooth is not supported without a third party app on both devices.
    Forget Bluetooth (which is quite slow anyway) and use a cloud service like Dropbox.

Maybe you are looking for