Transfer Music with other software! Please help
I was reading one of the FAQ from nomadness.net and they said that if you have connection problem with Zen then you could try some other transfer software such as Windows Media Player. Does anyone know how to transfer music with these other software to a Zen Micro player?
I don't find the Windows Media Player or the Creative Players to be very easy to use, at least for me. Am using the Real Player and find it is great to use for my Zen Micro 5GB and Zen Xtra 30GB. You can go to www.real.com and download their free basic player. Go to the burn/transfer page and it will prompt you to add your Zen Micro to the list of devices. The learning curve seems to be very short for this player.
Best wishes.
luvmyrescuedogs
Similar Messages
-
i have ipad4 but i have a big problem in blutooth so ican not pir this with other devices . please help me
Which other devices? Please note the list of supported Bluetooth protocols below.
http://support.apple.com/kb/HT3647 -
Can't transfer music to new computer, please help
My old computer crashed so I can't connect it to my new one to transfer my songs. I plugged my ipod into the new comp before downloading itunes and I save my playlists onto it in My Music. Then I downloaded itunes and tried to transfer my music into my library. It says theres an error and the songs can't transfer. Also, the ipod's songs pop up when I click on the ipod but they're gray and I can't highlight, move, play, or acceses them in anyway. I reeaallly don't want to download my 800+ songs all over again so any tips will be appreciated!
I'm new to this Discussions Forum but I've notice so many people with the same problem as u...I guess I'll just post my solution here n hope it relieves some of everyone's headaches..
I've discovered a way to preserve my ipod songs n transfer it into my new computer. It took
me quite a while to figure it out so if it also work for u, please give credits where
credit is due~ ^_^ MyMyMai
Follow these steps for Windows XP users:
1) Go to "Start"
2) Go to "Control Panel" n click on it.
3) Click on "Sounds, Speech, and Audio Devices"
4) Click on "Portable Media Devices", then a list of ur portable devices should pull up,
including ur ipod.
5) Click on ur ipod, then it should pull up folders named "Calendars" "Contacts" "Notes"
"iPod_Control" n "Photos"
6) Click on the "iPod_Control" folder, it should pull up several folders named "Artwork"
"Device" "iTunes" n "Music"
7) Click on the "Music" folder which would bring up several folders named "F00" "F01" "F02"
and so on and so forth.
8) All you have to do is copy n paste ALL the folders onto ur new hard drive, like ur
desktop or "My Music" folder.
9) Open up ur new itune on ur new computer, go to "file", "add folder to library", and
click on ur "My Music" folder or each "F00" folders on ur desktop.
All the songs should transfer into ur new iTune library. Hope this helps! -
Toshiba M35X S109, having great issues with installing software - PLEASE help.
I have a Toshiba M35x S109 and lost my harddrive. I installed a new one and tried to reinstall software from the Toshiba Recovery and Applications/Drivers DVD. When I first tried this it came up to the first page that said to press F1 for ok or F2 to cancel. I pressed F1. Then it went to the warning page telling me that all the data on harddrive would be lost if I continued. Press A to abort or C to continue. I pressed C. It took me back to the first page again. This happened over and over.
I called tech support and they told me I had a bad disc and could either get a new one or install from a full version of Windows. I tried that as I have a full version of Windows 98 and an Upgrade version of Windows XP Home Edition. I got the Windows 98 on and get to the desktop but can not seem to get the keyboard to work. Mouse works, but keyboard does not work at all. Reinstalled Win 98 as instructed by Tech Support and it worked. Then we hung up and I did as they instructed and tried installing the upgrade to Win XP home ed, but when I needed to input the product key - again the keyboard does not work. URGH.
I called tech support back again and was told the previous tech support gave me bad info. This guy said I needed to install from the Toshiba restore disc and left me with a million instructions that I did not understand on how to erase the harddrive of the Win 98 and then start over with the Toshiba restore disc.
I am so frustrated and confused and really need some good advice and help. I have the 98 installed but the keyboard is not working. The pc initially had the Win XP on it. I will likely upgrade to the Win 7 if I get this going but can't get past this issue. What should I do?????
Do I need to erase WIN 98 and start again from the Toshiba Restore Disc?
If so, why would the Restore disc not work when I initially put it in and try? This problem continues to reoccur with the old and new Toshiba Restore Disks. What else could be causing this?
Can I go from Win 98 and fix the driver issue or what ever it is and move on with the rest? How do I fix the problem with the keyboard?
ANY AND ALL HELP is very much appreciated! Thank you.
AJJMH
Solved!
Go to Solution.Did the flash complete, or shut off prior to finishing? If the former there is a chance, but if the latter there is little that you can do at home to fix this (as in, if you need to ask you have neither the equipment or the skill set to fix it yourself).
Do you have the Intel or the ATI graphics on your laptop?
What bios revision was on the laptop originally? If you don't know that then why were you trying to update the bios as you wouldn't know what revision to install? Plus, it would have come with at least rev. 1.0 installed already so why would you want to install that again? Trying to install an older revision over a newer one won't work without some specific flags added to the command.
Did you flash from a startup disk or from Windows?
Can you get into the bios settings by pressing the F2 key (or whatever key that model requires)?
Have you tried a reset of the system by doing the following. Unplug the AC adapter, remove the battery, then press and hold the power button down for a minimum of 30 seconds. Now replace the battery and AC and see if you can now access the BIOS when it starts to power up.
Are you sure that the new hard drive is properly installed AND working correctly? Did it work prior to what appears to be a failed bios flash?
I'll try to help, but I'm afraid this might be a bad flash which will require sending (or taking) it to a qualified repair shop/technician who has the special equipment and skillset to reflash the bios using an Eprom burner and that will run you about $100 or so the last time I checked.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
When I hit any music from the library the list start rolling and it cautions " the URL is not supported by this server it's so frustrating ps help
Have no idea what you're talking about. There are no URLs involved with playing from your music library anywhere - on the phone speaker, hardwired speakers or Bluetooth,
-
i spend a long time to try to sync my itunes music on my ipod 160 GB Classic, but after waiting so long get a pop up message that itunes stop syncing because of error 46, some times giving me 58, 1469, and many other numbers, please help am using macbook pro
That is precisely what my mid-2010 MacBoook Pro 13 was doing before the drive finally died after an Apple Genius rebooted it a dozen or so times. I have since read about the exact same thing happening to others, including a writer for The Atlantic magazine who had never had an issue with a Mac before. Do a back-up ASAP to make sure you don't lose anything and see about replacing the HDD. It is only about $140 for a new drive. The real issue is if you lose your data, too. So, make sure you do that back-up!
-
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me
What e-mail are you talking about?
What exactly did it say?
Are you sure that the e-mail was not your receipt? -
i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest
Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
I had a mac and then switched to a windows computer. When i downloaded iTunes and signed in with my apple idea I do not see my music... Please Help!
Copy everything from your old computer or your backup copy of your old computer, to your new one
-
i can't transfer music and other files from library to my iphone 4 by dragging it.can anyone help me?is there any other way to transfer files into iphone?
If you want to drag and drop ( don;t know why you would do this), you will have to check manually manage music.
Why not just sync?
iPhone User Guide (For iOS 5.0 Software) -
How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.
If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck! -
N97 mini: Can't transfer music with ovi suite!
Someone please help! every time i try and transfer music with ovi suite it says "can't read tracks" anyone know how to fix this?
Solved!
Go to Solution.Depending on how much time you want to spend, there are a couple of methods. Before putting music on phone, get it up in Windows media player, then drag and drop album art onto the album picture at left hand side of screen. Then right click on a track and select advanced tag editing, and click pictures, the photo you drag and dropped should be there. If you want individual pictures for each track you can add from here ( but you would need to do this on phone also.
On the phone select an album, select options, select album art, select change, pick a picture (the album cover) select ok, ok wait and thats it. You also have album art choice in the options of each individual track, but will need more photo's in gallery to use different ones.
Good Luck
ps Kudos is quite a cheap comodity !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
Hi
When i am trying to restore backup to my iphone, its coming up backup is not compatible with iphone. Please help me restore.
Thanks
MandyFrom the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.
Maybe you are looking for
-
Cannot connect to smtp sever in Mail or Eudora
Hi All, I've been reading the forums all afternoon and although there are a lot of similar problems none exactly like mine (or, no solutions that fixed mine!) After a hard drive failure I'm trying to set up Mail with my godaddy account. I can receive
-
Can't open CR2 files in CS5, updates fail
I have some CR2 files I need to edit. I have CS5. When I try opening the files I get the following message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera
-
Really need some !!HELP!! ALMOST 6 MONTHS WITH OUT BURNING A CD
I've posted before about my problem but but i still have not gotten an answer. This might be my last atempt to get any help before i end up taking my laptop to a repair shop so here we go. I've recently ran a diagnostic with i tunes and here it is: M
-
I have a situation where i have partitioned a record set. If in any of the partition on that recordset, the value of one field(field name- status) is '45' i need to order the result of that partition by- 'outdate' desc, 'receiveddate' desc and order
-
BT Cloud blank setup window on new Windows 8.1 PC
I've been using BT Cloud successfully for months however I have ecently upgraded my PC and I'm now running Windows 8.1 with IE11. When installing BT Cloud to add the new PC to my account the setup window fires up but is blank so I can't continue. I c