Transfer ODS with Transport Connection

Hi all:
In Data Warehousing Workbench,i want to use Transport Connection to transfer ODS from DEV
to QAS; When i drag the ODS ZCH_DV01 into the Collected Objects,there is a error "Object '4C22YS5Z07BT88EVNXAO5S7YP'(ROUT) of type 'Routine' is not available 'A' ".
But although with the error,the ODS also can generates the Request ID.
I want to kown when i transfer the Request ID to QAS,whether i can use the ODS correctly in QAS and how the mistake take place.
Best Regards

Hi Ajeet
    Thanks reply!
    I want to transport update rules , transformation as well the DSO to QAS.
    I check the table RSUPDROUT,but i can not find the routine item "4C22YS5Z07BT88EVNXAO5S7YP"
   in D or A OBJVERS. Wether i need to add the routine item into the table RSUPDROUT.
   Then i drag the DSO into the Collected Objects again, finding that the error not    same as the first    time;for example there is no "4C22YS5Z07BT88EVNXAO5S7YP" !
Best Regards!

Similar Messages

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

FTP transfer failed with message 'connection to the server failed'

Hello,
I downloaded the CCE client response gallery from The Turning Gate but every time a create a new web gallery and try to upload i get the above message. I've checked my settings several times and they are correct. I've ebb follows an online tutorial on how to upload a web gallery and my settings are correct, so if anyone can help I would be very grateful?
Regards
Dafydd
www.picturethisphoto.co.uk

DafyddS wrote:
Yes I've tried different galleries
So, the problem is NOT unique to the specific server you are trying to connect to? In other words, you have tried different servers, with different credentials, and can't connect to any of them? Is that correct?
Can Lr connect to the internet in the map module?
In other words, unless somebody comes along who has the answer, or re-installing helps.., it seems worthwhile to isolate the problem, is it:
* Lightroom/plugins can't connect to the internet?
* FTP is broken?
* FTP to a specific server is broken?
Or did I misunderstand, and you've only tried FTP to one server? - if so, it could be that there was some change at the server end, like it now requires a different port or something..
If you want to try another server, you can get a free account at Flickr, for example, and try to upload via FTP..
Rob

Need of Transport connection tab

Hi BWers,
What is the need of Transport connection tab in RSA1.for example,I have a cube and I saved in a Transport request.using SE09 I transport it,then What is the need of Transport connection tab.
Sekhar.

Hi,
If you want to transport one cube only then you can transport it through Se09.
But if you want to transport 10 cubes and the corresponding infoobjects and structures along with it then it is not possible for you to go in each individual cubesand corresponding update rules,infosources again and again.......as it a big overhead.
With transport connection you have to just select the cubes and transport connection takes care of other issues with the grouping you use.
Also in the case of Queries it always better to use transport connection as you cannot trasport all the the constituents through SE9.
Also through transport connection you have the flexibility to change the packages of the elements insted of going to go each object individually.
Hope it clears
Thanks

Use an existing request in transport connection

Hello
I want to add objects into an existing transport request with transport connection.
How can i do?
Can i create a new one from transport connection but not transport it automatically? only insert objects inside it.
Thanks.

Dear Fernando Ariel Gonzalez ,
I think we can..
Please go through the steps below,
1. Go to rsa1 -> business content
2. Choose 'grouping' as "in dataflow afterwards"
3. choose 'collection mode' as "collect automatically"
4. choose 'infoproviders by infoareas' - choose appropriate infoprovider and 'insert objects for collection'
5. Select your query / queries
6.choose 'create transport request for BEx' and select appropriate development class
To Release a request....
se09/se10, 'modifiable' is marked, and 'display', cursor on you request and click truck button (release),
if request has 'child' request, need to release it first.
To delete or remove request
Goto SE03
Requets/Tasks > Unlock Objects
Give the Request num & Execute
Now Delete the Request on SE09
It is possible to rmove before transportataion from SE03. Well if you want to remove from after transportation it can happen in a case like this. While you delete the obect in dev, it should ask for a request and when that request is transported the object will get deleted in the target sys too.
For more information....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
/message/1257362#1257362 [original link is broken]
Re: How to collect & transport new cube & new update rules
Re: Transport to BWQ issue?
Re: Transport a query from BWQ to BWP
Hope it helps you,Revert me back if you have any queries
Regards
Bala

Why created package with SE80 can't be found in Transport Connection?

We want to transport our custom InfoCubes from Developement environment to Test environment:
RSA1 -> Transport Connection, select an InfoCube we created and drag it over to the right frame, group it by "In Dataflow Before and Afterwards". The Package column shows it's attached to $TMP that we would have to change it to a custom package that it can be transported over. We click the Package picture icon with a pencil trying to change the package attached from $TMP to a custom one, but can't find any custom package we created with SE80 from here. Could someone tell us why?
Thanks

hey AHP,
Yeh, if I run rsdcube and follow the menu you specified, I can assign the InfoCube to the custom package I created with SE80. I wonder why it's to work in this way? If clicking the Package picture icon with pencil in Transport Connection doesn't work or successfully to bring up the correct custom package we created, then why SAP has this stupid picture icon over there to mislead our developers?
You asked me how we created the custom package, we created them with SE80.
BTW, someone says that's BASIS work to create package to do the transports in their companies, how about your company? You don't have to create custom package and just assign the objects to the package BASIS creates for you?
Also someone says the ideal transport strategy is to group by "Necessary" other than "Dataflow Before and Afterwards", how do you think?
Thanks

Transfer rules to the new source system not visible in Transport connection

Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
Srinivas

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Using XML Import/Export in Transport Connection

Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection. This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements? I was trying this out between a Dev and Sandbox system and only had limited success. I was able to take a small query and perform the Export to a local .xml file without much difficulty. But when I try to do the Import, my query never shows up. The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
==========================================================
SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
Diagnosis
You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
System response
The object was ignored during the import.
Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
Procedure
Install the specified objects from Business Content. Only import the metadata afterwards.
=========================================================
The portion returned for Saving and Activating returns green lights. The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK.
Just curious if anyone else has worked with this and could help advise.
Thanks... Jody

This is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
However, when an InfoObject is collected, you get all the attributes, texts in all languages.
If anyone has more insight, please enlighten us.
-John

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a facility to more easily sync music my four Apple devices and my wife's three Apple devices without the horrid iTunes error messages when there is nothing wrong with our connection?

We’ve been using iTunes Match pretty much since the beginning, but recently my wife has turned it off and refused to re-subscribe. I’m fast getting to the same place. It just seems so unstable, wishing Apple would invest some of their billions into it. I read with dismay how many people find Google Play to be so much better. As I write this I see a “Cannot connect to iTunes store” on my iPhone. Noting wrong with our connection … it’s alive and well.
Bearing in mind that I have two Macs, an iPhone and an iPad and my wife has a Mac, iPhone and iPad what we really want is the following.
I want all our music to go up to one location (iCloud or even better our own server). I want an app or web app that I see on the right hand side a list of artists or albums (or playlists) and columns for each device. I want to be able to tick the “matrix” to specify which devices the artist/album/playlist should be downloaded to. When the device is switched on, it must download (no fuss no bother and no stupid I-can’t-do-anything-about error message). A nice enhancement would be to specify three options for each entity (Download, Stream, Not Available). There must be options to easily bulk select.
So … is there such a thing out there?
In my immediate family plus spouses and kids girlfriends/boyfriends there are 11 Macs, three iPads and 10 iPhones. My brothers are very similar. I have nieces and nephews that use Apple. My parents also use Apple. Collectively, we have a bunch of Apple equipment.
Did I mention I'd like it to be stable?

Unless you have EE 4G service the UK 3G networks are the base of your problem - they are just far to variable in download and streaming speeds.
Add to the fact that use can/will eat into your Data usage !
ITunes Match as a service is pretty experimental at best over 3G and really i think so long as you have a 32GB or larger iOS device sync'ing via iTunes on a PC/Mac remains the best way to transfer music.
Remember even with iTune Match your music is STILL ON your own PC/Mac HDD !
Usng the devices tab in iTunes you can customize each differing identified iOS device and load as you please.
When we have a competitively priced stable and extensive LTE network in the UK then reconsider Match at that point.

Intercompany Stock transfer order with excise

Hi,
Can anyone tell me about Intercompany Stock transfer order with excise step by step.
hoping to replu

Hello,
Create Stock Transport Order - ME21N
Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
Regards
Mahesh Naik

How do I manually transfer music with the new itunes update for Windows? I don't want to sync my library and lose all of my music for what I have in my current library.

How do I manually transfer music with the new itunes update for Windows? I don't want to sync my library and lose all of my music for what I have in my current library.

The same way it was done in every previous version.
Connect the device to the computer.
Right click on the device in iTunes and select Transfer Purchases.
Why would you lose any content by syncing with iTunes?
Is this not the computer that the device is normally synced with?

Can i transfer stock with transfer order in Inventory management?

Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?

I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location.

Problem with Access Connection

Hi there At the moment I am using Lenovo T61 with Vista Business & SP1. In addition I have got the Access Connection v 5.12 and Intel Wireless card number 4965agn.I saw that, when Wireless network is open my T61 can established connection with more than 130Mb transfer both by access connection and Vista systems settings. Unfortunately when I set WPA/WPA2 security my T61 by vista settings can establish connection more than 130Mb but by access connection is established only 54Mb. I also saw that Access connection establish 802.11g standard (when the WPA is set) instead 802.11n. (When Wireless network is open then established 802.11n standard).Is possible to get any hotfix to Access Connection to solve this problem? RegardsPawel

any idea?

Transfer ODS with Transport Connection

Similar Messages

Maybe you are looking for