Transfer of changed order BOM from quotation to sales order

Good morning!
Please consider the following scenario involving variant configuration:
A quotation is raised in the system, and the values of the characteristics are assigned. Therefore a order BOM is generated (for the quotation), and that order BOM is changed manually using tcode CU51 (for cost estimates purposes). When it is saved, the system updates the BOM in the quotation automatically (ok, this is a desired behavior).
Although when we create an sales order with reference to that quotation, the newly chnaged order BOM is not copied to this new order, the order BOM is redetermined instead.
How can I make the system to copy it from the quotation properly?
Thanks in advance!
Adriano Cardoso

Thanks for the reply. I have verified this note and it seems more toward the BOM explosion in the sales documents themselves than for the modifications made afterwards (CU51 changes in BOM, for example).
After realizing that, I´ve made a little research and found the Order Engineering Workbench possibility, which seems to fulfill all our requirements regarding this point. I looked all over SDN and haven't found too much input about it. In the SAP VC book, says it is not part of the SAP ERP, but a add-on.
So, you don't happen to have any idea of how can we check if it is activated / installed in our system or not? We are on version 5.0.
Thanks!
Adriano Cardoso

Similar Messages

How to Copy Cost Estimate from Quotation to Sales Order in MTO Scenario

Hi,
We are working on a MTO scenario- Sales order Costing with Valuated Stock.
And our case we are creating the Cost Estimate at the time of Quotation using PP qty structure. Now we wan to transfer the cost estimate to Sales Order as we don't want to recost the sales order.
Currenty it's transferring only the EK01 condition as total planned costs in Sales order but we want to see the itemization also.
Please suggest is there any way to transfer this cost estimate with itemization from Quotation to Sales Order.
Regards
venkat

Hi
As far as I know the CO esimate does not get copied from Quotation to Sales Order
You need to recost the SO again.. If your Qty Structure has not changed between Quotation to SO and your valuation variant is also the same - it would give the same result
br, Ajay M

To get PO reference number from Quotation to Sales Order

Hi ,
As per the Client requirement, I configured the Quotation process with respective to few Distribution Channels in SD. While creating Sales Order, PO ref.no is not copying from Quotation to Sales Order.
What necessary changes required to be done in Copy Control - VTAA. Can it possible through standard routines (or) Do i need to Develop a new Routine with BSTKD ?. Pl provide me solution with earliest. Thanks in advance !
Best Regards,
SRI

Hi Senthil Kumar B,
If the Sales Order is already stored in the DB you should be able to get the internal Row number from the DBDataSource.
...when the user is just entering the SO this won't work if I remember correctly. Do you need that too - or what is the functional goal that you want to reach?
Regards,
Frank

Copy data customer PO and PO date field from quotation to sales order

Hi Friends,
Can you please let me know what copy control settings I need to maintain in order to copy customer PO# and PO date field data in quotation to sales order.
All the data is getting copied from quotation to sales order when I create sales order with reference to quotation but the customer PO no. and PO date is not getting copied.
Can anyone please help.
Regards,
Wasim.

HI
Not sure if this is possible via Customization or not but you can try the user-exits or Routines for the Sales Order program for this
You need to change the include FV45C102 (assuming you have copied standard order and the copy controls). ABAP team should be able to make changes to this routine and achieve your requirement.
In VTAA, after choosing the Source and Target order type and choosing the right Quatation item, check the routine for 'Bus.data/item compl.' and it will be what has been mentioned above.
Please check &Revert
Thanks&Regards
Raghu.k

GATP run ffecting manual Pricing from Quotation to Sales Order

Hi SAP Gurus
We have a bit of problem, when we place a Quotation for a material and APO gATP is run it creates a sub-item for the material and thatu2019s where we add our manual prices(e.g Freight Charges).What than happens is the Quotation is later converted to a Sales Order and gATP is run again( I would think to still see if stock is still available) but all those manual Conditions are lost and our Users have to re-create those manual conditions. I checked in Copy Control(VTAA) to make Pricing type C(Copy manual Elements). Does anyone have an Idea what else can I do to make sure Manual Price is copied even though gATP is run again.
Thanks
Phenyo

Hi Friend,
To copy the pricing from Quotation to Sales order without change you have to maintain copy control settings from QT to OR
Goto the Transaction code VTAA then click on position and choose the Source document as QT and the Target document as OR
Then click on the item in the control tab and choose ur item category and click on Display
Now in the Pricing field change the value To D
Hope it is clear and work.
regards,
santosh

Copying pricing condition from quotation to sales order

Hi,
I would like to know how the following can be achieved.
In quotation, i have two conditions type.
For e.g. a item value
1000 -> PR00
3% -> ZMarkup
Gross Value -> 1003
In the sales order, we are only having PR00 as the condition type. Thus only 1000 is being copied to sales order.
How can i achieve such that the gross value in the quotation can be copied into PR00 of sales order?
Regards

Hi Friend,
To copy the pricing from Quotation to Sales order without change you have to maintain copy control settings from QT to OR
Goto the Transaction code VTAA then click on position and choose the Source document as QT and the Target document as OR
Then click on the item in the control tab and choose ur item category and click on Display
Now in the Pricing field change the value To D
Hope it is clear and work.
regards,
santosh

Flow of Information from Quotation to Sales Order

Hi Group,
Just want to understand is there any possibility to put a check while information is flowing from Quotation to Sales Order.
Once information flows to Sales Order no one should be able to change the flown information in Sales Order. Any changes to be done in Sales Order, user should go to Quotation & Change provided Authorization is given.
How to put this check. Need help & explanation.
Regards
Deepak

Hello Deepak,
There are normally authorization BADIs for this. But once a sales order is created from a quotation the sales order is not updated if the quotation is updated any more, according to my knowledge. That would also be a strange business process as the quotation would have been already approved by the customer.
Best regards,
Thomas Wagner

Billing Plan from Quotation to Sales Order

Hello Friends,
When Iam creating a Sales Order with reference to a Quotation, I want to copy the Billing Plan automatically from Quotation to Sales Order.
How can I achieve this??
Thx,
Smitha.

Hi Smitha,
During sales order processing, the system determines from the item category whether a
billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and
cannot be changed in the sales document
REWARD IF U FINDS THIS AS USEFUL...
Regds
MM

Copy BILLING PLANS from Quotation to Sales Order.

Hi Guys,
I am trying to copy the billing plans from quotation to sales order(SO), when CREATED BY REFERENCE from quotation.
Quotation HEADER LEVEL Billing plans -> SO Header Level Billing plans
Quotation ITEM LEVEL Billing plans -> SO ITEM LEVEL Billing plans
I have already tried to use copy control routine 402 by adding a statments to copy internal table CPFLT to XFPLT. It did not work.
I will appreciate if somebody can tell how to accomplish this task. It is for ECC 6.00
Thanks,

Hi Manoj,
I know its very late to provide the solution. Thought of sharing since I had a similar requirement as yours and got the solution.
Here is the Solution::::
1) Let 402 routine stay in the config and do not add any custom code in it.
2) In TCode: VTAA , in FPLA tab, copy the routine 251 (Conditions) and copy the below mentioned code..thats it...
FORM DATEN_KOPIEREN_251.
*{ INSERT ECDK900223 1
LOOP AT CFPLT.
MOVE-CORRESPONDING cfplt TO FPLT.
CLEAR FPLT-FPLNR.
FPLT-FPLNR = FPLA-FPLNR.
MOVE-CORRESPONDING FPLT TO XFPLT.
XFPLT-UPDKZ = 'I'.
APPEND XFPLT.
CLEAR XFPLT.
ENDLOOP.
UPD_FPLT = 'I'.
*} INSERT
ENDFORM.
Now you should be able to copy the Billing plan from Quotation into Sales Order.
Reward if helpful
Thanks,
Maqsood.

Copy item from Quotation to sales Order

Hello,
How can I copy all the line items from quotation to sales order including the price, Quantity & the Sales Texts?
Thanks
AK

Hi
Maintain copy control from sales document to sales document using t-code VTAA. Select your target & source sales document type from the list & double click on the same. There you can define the copy control.
For Text control you can use the T Code VOTXN & create your own text controls.
I hope this will be helpful.
Thanks & Regards,
Bidhu

Cannot change Tax Code from the referenced sales order line

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

Copy control from quotation to sales order

HI ,
Though my quoation is incomplete it can be copied into sales order, kindly suggest me a so;ution where in incomplete quotaion cannot be copied into sales order.Kindly explain me teh setting in TCODE (VTAA) STEP BY STEP.
Regards
Sunaina

hi,
Copying control for sales documents is in Customizing, under Sales and Distribution - Sales - Maintain Copying Control for Sales Documents.
In this you can change the procedure by not selecting incomplete quotation for sales order, but this can be done only when some of the data in quotation is missing.
like dont give the validity date in quotation and save it before providing the validity date.
Maintaining an Incompleteness Procedure
An automatically-created quotation does not contain a Quotation-valid-to date. The customer's system requires this information for processing; therefore you have to add it to the quotation prior to saving the document, and before generating the message to the customer.
The incompleteness control is set up in such a way that the quotation is incomplete if this date has not been entered. In Customizing for Sales and Distribution, you choose Sales and Distribution - Basic Functions - Incompleteness Control for Sales and Distribution Documents, to assign sales document type QT (quotation) to incompleteness procedure 10, which contains the field for this check.
Message Control
The following message types have been created to Sales and Distribution (SD) in the vendors system:
·        Message type AN00 for the quotation
·        Message types POST and PNST for status inquiries
·        Message types BA01 and BA02 for the order
         confirmation and amendment respectively
·        Message type LALE for the delivery
·        Message type RD00 for the invoice
regards,
Siddharth.

Header text copy from quotation to sales order

Dear all,
My Client Requirement is like this if i entered some text in Quotation header text the same should be copied into sales order hearder text , i tried a lot i am unable to find the answer
kindly guide me.
With Regards
san rao

Hi San Rao
If the Quotation header text has to be copied into the sales order then while configuring text determination , make sure that you are Configuring sales document at header level two times and .First time you configure for quotation and second time you do for sales order and while doing for sales order you assign a sales order and assign a the text id that has been used for quotation .then your problem will be solved
Regards
Srinath

Weight is not copying from Quotation to Sales order

Hi Guru,
I have made quotation and given weight and volume, and i created S.O with refernce to Quoattion, now the weight and volume is missing in sales order,
My cleint requirements is it should copy and it should be open feild so that they can change here...
wat all settings is required in copy control....
Thanks in advance...
Regards
RAmakrishna.P

Hi,
You will not get this requirment in std settings, you have to do some abap coding wiyh the help of abapes to get you r requirment from quation,
Regards,
Caprin

How to copy header/item text from Quotation to sales order?

Dear All,
On ECC 6, I am trying to get text copied from the quotation to the sales order (when the order is created with reference to the quote).
As of now, the order creation is fine with all the right items & partners etc. in it, but the text is missing.
The same text IDs have been assigned to both documents (at header & item levels).
Is the text content supposed to be copied by standard SAP? Is there any customizing needed for this? Please guide me on how I can achieve this.
Please help.
Thanks
Best regards,
Rohit L
Edited by: Rohit Lokray on Nov 26, 2009 10:49 AM

Hi Rohit,
Pls check this e.g.
Text Determination Procedure
You can define text for
Customer
Sales document
Delivery
Billing
1) Create new text types
(Menu Path: SPRO-IMG-Sales and distribution- Basic function-Text Control-Define text type). You can define new text type in this menu for your requirement for different objects (Customer, Sales document, Delivery and billing document). T-code: VOTXN
2) Assign the new text ID in the text determination procedure
(Menu Path: SPRO-IMG-Sales and distribution-Basic function- Text Control-Define text type). Click on change on application tool bar. Select text procedure created and double click on Text ID' s in text Procedure. Assign new text Id to Text determination procedure
3) Define and Assign an access sequence to the new text ID
(Menu Path: SPRO-IMG-Sales and distribution-Basic function-Text Control-Define access sequence for determining text).Access sequence can be defined only for sales document not for customer master. Select text procedure and double click on text id's in text procedure folder. Select text id and double click on access sequence and create new access sequence here.
4) Assign the Text determination procedure with the sales document type.
(Menu Path: SPRO-IMG-Sales and distribution-Basic function-Text Control-Define and assign text determination procedure) In this menu path you can assign text determination procedure to sales document type.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/758534c960a134e10000009b38f83b/frameset.htm]

Transfer of changed order BOM from quotation to sales order

Similar Messages

Maybe you are looking for