Transfer of Configuration settings client to client within server

Hi All
I have a basic simple doubt. as u know, we can have different client in one server. My doubt is if I make all cofiguration settings in one client and I want the same configurations to be available in other client of the same server.
in our environment we have automatic transfer after release from Development server to Testing Server and from Testing Server to Production server after release.
where I want in Development server from 100 client cofigurations to be available in 650 client of same server.
Please clear this doubt.
Thanks & regards,
Zeenath.

Hi Zeenath,
Like Ravi said, there are settings which control this
You can find this in scc4( this is a basis transaction) i dont know if you will access
to this. Your golden or config client 100 should have the raido button automatic
recording of changes, i think in your case the radio button must be on a different
option, work with your basis team on this.
Below is a guide i had made for the employees in our company,
hope this helps, please assign points as a way of thanking.
Once you do the configuration in dev 100 and save you get a transport number. There we create a request and name the transport.
If you want to move to 120 or 140 then you go to that client (the target client) Tcode SCC1 and enter the Transport number that you got when you saved in 100. Then save it the system will ask you do you want to copy changes from 100 to 120? Say yes. This change takes place immediately, do not forget to check the box of include subtask and make sure test run is unchecked.
SCC1 would not be used to copy to other clients 250, 270 and 300( QAS and prod)
If you want to move to QAS you would go to se10 ( make sure the " modifiable" box is checked) and then go to the transport number that you get when you saved in Dev 100( you can identify your transport by the name that you gave when you saved in 100)
And then release it ( click on the truck) lower node first and then the upper one.
Transports to QAS take place every half hour ( every 10 th minute of the hour) eg 3:10 then 3:40 and so on.
Once tested in QAS then we would go to help.xxxx.com and then put the transport number that we want to br moved to PROD.

Similar Messages

Configuration settings Inter Company asset transfer

Hi
Can you please give material on Configuration settings Inter Company asset transfer. we have 2 different company codes under same client. we want to transfer some assets from one company code to another company code. please help
Regards
Sreenivasulu

Go to T.code ABT1N
1. Give transferring cocode and asset number that you want to transfer
2. Give the cocode to which you want to transfer and select whether you want to transfer to an exisiting asset or create a new asset
3. Maintain Acquisition from affiliated company and clear revenue sale to affiliated company accounts in AO90 for the contaicode to which u r transferring.
4. Maintain Company for both the company codes in OBY6
Assign points if helpful
Sneha.

How do I configure snow leopard server to allow local client to access the server using its public domain name

I have SLS 10.6 running on my local network with DNS configured.
I can access the server from a client on the lan using server.local or server.domain where domain name is my publically registered domain,
From the internet I can access my server using the registered domain name i.e. www.domain.com.
Is it possible to set my server up so that www.domain.com also reaches the server when used by a client locally? At present I get a page not found error.

The configuration you're aiming for is called split-horizon or split-brain DNS, and it's quite possible. It can get slightly hairy when you have different stuff using the same host name for different purposes, for instance, and you'll need to track all external DNS entries in your internal DNS server when you're running "split".
Here is how to set up DNS services. Split-horizon is one of the options listed there.
My preference is to use a different domain or subdomain within the network, and to avoid using split-horizon where I can reasonably manage it. One domain name is configured for and reachable outside and is effectively public, and the other domain (or a subdomain) is inside and private and only reachable directly or via VPN, for instance.

Transfer Rule copy in BW When client is changed ...Urgent please help

Dear Guru's
We have BI 7.0 System Connected with R/3 as S.system Which has two clients(Client 90 and client 10) , Earlier the Source System connection was with Client 90 and Exists feel Transfer rules and Ipackages, Now the Connection is changed to Client 10, So is there any possibility or a process that i can copy all these Transfer Rules and I package from (client 90)to (Client10), But not creating it manually again.
Can any one please suggest me some idea.
Thanks in advance
Dev
Edited by: Srinivas dev on May 29, 2008 11:44 AM

HI
One small Qn.
The note is for changing the client or copying it from one S.system to another sys (Eg:- dev to production)
But in my case i have to change the client within Bw system , So that i can get all the transfer rule from one client to another
Thanks and Regards
Dev
Edited by: Srinivas dev on May 29, 2008 3:05 PM
Edited by: Srinivas dev on May 29, 2008 3:22 PM

Best Practice to configure tnsnames.ora on client of MAA environment in 10g

Hi,
I have a MAA environment, 1 RAC Primary of 2 nodes and 1 RAC standby of 2 nodes too. I want to configure the tnsnames.ora on clients (we have many clients on each PC) and I need to configure the tnsnames.
I have read some papers but the information is not clear regarding to configure the tnsnames on clients. I just want to have only one entrie on tnsnames that I can use on clients to connect to RAC Primary and/or Standby depending on what site is primary in that moment, I was thinking in something like this:
SALES.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = site1a)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = site1b)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = site2a)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = site2b)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sales.world)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
Where site1 is RAC Primary now, and site2 is standby. But in case of switchover, I want that clients recognize automatically to which site connect.
I was thinking to stop listeners on site that is not primary on that moment.
The question is if this is the best practice on this scenario?.
Thanks for your advice.
Luis

Hi Louis,
you need to setup a service with clusterware. On both sides: primary and standby.
On primary you start them. On standby the services are also configured but stopped.
In case of switchover or failover, data guard will notice clusterware to bring them up.
You need to use this service name in your clients tnsnames.
Another issue are TCP timeouts, to protect against them you use
outbount_connect_timeout in your sqlnet.ora
Also have a look at
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_SwitchoverFailoverBestPractices.pdf
HTH Mathias

I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description fie

I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

Please wait while windows configures SAP Business One Client

Hi
I have just upgraded to SAP B1 8.8 PL16
All is fine apart from when I run vb 6 to compile some early programs of mine I get the following window which you can't seem to easily cancel
Please wait while windows configures SAP Business One Client
Can anyone suggest anything please ?
Thanks
Regards Andy

Hi,
You may check this: SAP 8.8 PL13 - Client keeps getting Configuring Client dialog box.
Have you searched the forum or web? There are quite a few discussions regarding the possibility for this.
Thanks,
Gordon

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

Hi Can anyone guide me configure LDAP client in solaris 8 server.

Hi,
I am already having the solaris 8 LDAP master server. We have new server which i need to confgure as a client to that master server.
Can any one help me to configure the same.
Thanks in Advance....
Bala......

LDAP Setup and Configuration Guide
Solaris 8 2/04 Update Collection > LDAP Setup and Configuration Guide > 1. Overview > Solaris Name Services
[http://docs.sun.com/app/docs/doc/806-5580/6jej518ou?l=en&a=view&q=solaris+8+ldap]
Download this book in PDF (557 KB)
[http://dlc.sun.com/pdf/806-5580/806-5580.pdf]

Settings for the Client by using NetWeaver Portals

Hi,
is there any document/how-to-guide which settings on the client has to be made to run a Netweaver Portal ???
I need the Browser setting and all the settings which have to be made...
Thanks for helping,
Marielle

Hi,
here are the settings as described in the sap help
http://help.sap.com/saphelp_nw04/helpdata/en/7c/48e93be23c8d06e10000000a114084/content.htm

Is it possible to Automate configuration of skydrive pro client for a document library

Hi Everyone,
I would like to automate the document library url(configuration) for skydrive pro client programatically.Please let me know if this is possible and how can we do this.
Thanks in advance,
Sailaja Kaladurgi.

It's not possible to automate that. Although you can trigger a standard word-search using JavaScript, you can't do anything with the results - they just appear in the user interface. There's no GREP functionality so you can't search for an extended block of page content, and there's also no way to select or extract a specific region of a page into a new file using scripts.
The only way I could think of doing this would be in InDesign - assuming each question starts with a distinct element that can be GREPped for, you could separate each one onto a new page by running a search/replace that add a page break in front of the element. You can then export all the 'single-question' pages as images, and use PS automation to trim the whitespace.

Transport not getting created for certain SPRO settings in Golden client

Hi,
Currently we are in the realization phase of the project ,we are in the process of configuring system in golden client.
For some SPRO configurations ,the system is not prompting for the Transport request.
Kindly let me know if anybody had gone through similar kind of issue.
Regards,
mmuser
Edited by: mm Keyuser on Dec 30, 2009 5:34 AM

Hi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

How to Transfer Users fom CUA to Other Clients

Hello Experts,
Can anybody tell me the process to transfer Users From CUA to Other Client's?
Pls let me know if there is any Function Module to Transfer the Users from CUA to Other Client's or any other procedure to do this?
Thanks in Advance.........

Hi,
you can find information about this in 'Transferring Users from New Systems':
http://sas00706.saspf.svc:1080/SAP_ERP_ECC_60_DE_neu/En/8c/b1b13bb3acd607e10000000a11402f/content.htm and in the SAP documentation 'Setting Up Central User Administration'.
Regards Wolfrad

Client based settings and non-client based settings

Can I knwo what is the client based settings and what are the non-client based settings.

Hi,
Slight error in you question:
There are 2 settings:
1. Client specific: These are customising settings which impact only in the client you are making the changes in. Let us say that in an instance you have 2 clients, 800 and 900. When you change a client specific setting in 900, it is not reflected in client 800. This is beacuse the table where this setting is stored contains the client as one of the fields.
2. Cross Client settings: Here, a change in one client is also replected in all the clients in that installation. Needless to say, the tables for these settings will not have client as one of the fields.
Cheers

Transfer of Configuration settings client to client within server

Similar Messages

Maybe you are looking for