Transfer of data from ODS to ODS

Hi,
I have update rules set up from ODS 1 to ODS 2. I would like to take all ODS data into the ODS 2. In BI 7.0 we use transformations for this. How do we do this in the older version?
Thanks

Hi,
If the system is still 3.5 then you will have to go to generated infosource object for this DSO in Infosource tab.
Find the generated infosource for the source DSO1 begining with 8* like 8DSO1.
Create an infopackage here at the data source below this infosource.
Now you can schedule a full repair load from DSO 1 to DSO2.
Its just like scheduling the data load from data source to PSA in BI 7.0.
The only difference is here is with infopackage you can schedule the data directly into the targets and not till PSA only.. as it is case with BI7.0
Create a new a new infopackage- init without data transfer .
Create another infopackage-Full repair
Here give selections if the data is huge and cannot be scheduled at one go.and load selectrion by selection.
Hope it helps
Thanks
Ajeet

Similar Messages

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Load data from ODS 3.5 to Info Cube 7.0 ?

Hi BI Experts
I am new to BI 7.0 , my requirement is i want to load the data from ODS 3.5 to Info Cube 7.0
Is this Possible to load from old version to new version?
If Possible please let me the steps
Thanks in advance

Hi there,
ODS 3.5 is just like DSO 7.0 and InfoCube 7.0 is just like InfoCube 3.5
So you can still use the old fashion 3.5 mode with InfoSource, update rules, transfer rules and InfoPackage to the InfoCube, or you can now use a transformation with DTP
Diogo.

Deleted data from ODS

Hi Experts,
I have deleted the data from ODS in between i have not used the PSA Transfer method. If i want to get back that data which i have deleted how can i get it.
Thanks in Advance
Vara Prasad

do a full load to ODS from R/3.
Then do init without data transfer.
Then continue with delta loads.
I suggest u switch on PSA in infopackage so that if further issues occur in coming days,u can reconstruct data from the PSA.
cheers,
Vishvesh

The error about loading data from ODS to master data.

hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
     Message no. R3005
Diagnosis
     The InfoSource 8ZPA_0022 specified in the data request, is not defined
     in the source system.
System response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench of the Business Information Warehouse,
     update the metadata for this source system, and delete the InfoPackages
     belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Error while laoding data from ODS to infocube

Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
     Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the steps

Thanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem

Error While Loading Data from ODS to ODS

Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
Vijay

Hi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P.

Index used or not for selecting data from ODS in a start routine

Dear friends,
In the start routine of the update rules to a cube, I am reading some data of an ODS in to an internal table .
The ODS is indexed. But, I am not sure if the index is at all used in the Select statement (that gets the data from ODS to the internal table in the start routine) while loading data to the cube.
Any help is highly appreciated.
regards,
atlaj

Hi Atlaj
You can findout this is display execution plan for SQL statement in DB02.
Goto DB02. and under diagnostic, you find explain. Select that and enter your query. Make sure that everything here is in capital format. Below is a sample query which I have entered.
SELECT "CRM_SALORG" "SALESORG" FROM "/BI0/QORGUNIT"
WHERE "SALESORG" = ? AND "OBJVERS" = ? AND "DATETO" >= ?
AND "DATEFROM" <= ?
The select parameters should be inside qoutes and in caps and even the from table. Once you enter your query in this format, click on explain. It will show the index scan if the index is present. the output for my query will be something like
0 SELECT STATEMENT ( Estimated Costs = 1,348E+01 [timerons] )
        1 (COOR) RETURN
            2 (    0) TQ
                3 (    0) FETCH /BI0/QORGUNIT
                    4 (    0) IXSCAN /BI0/QORGUNIT~Z1
Where my last statement (line 4) is showing index scan and the name of index read is Z1.
Hope this helps.
Please let me know if you have any problems entering the query in the specified format and u get any error.
Regards
Sriram

What are the ways to download data from ods?

Hi all,
what are the ways to download data from ods?
1. se11/se12
2. listcube
3. infospokes.
Apart from the above 3 is there any other way to download data from my ods.
I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
thanxs
haritha

Hi Haritha,
Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
Now you should see and Excel Icon on top, click on it then select Table , then
Microsoft Excel and it will open your data with all columns you want.
I just tried for 213 columns
Hope this helps.
Thanks
CK

Transfer of data from ODS to ODS

Similar Messages

Maybe you are looking for