Transfer of duty from plant to plant

Dear All,
          I am reposting this thread as it was not answered and rephrasing the question.
If i have to transfer the excisable goods from one plant to another.
How the duty will be transfered from one plant to another?
Pl details the process steps.
with reagrds
Kavita

Hi
Both of your plants might be having individual excise groups.
Use stock transport order with delivery for ensuring excise updates at both plants.
Following the process steps given below:
1) Stock transport order in receiving plant
2) Outbound delivery in supplying plant
3) PGI in supplying plant
4) Proforma billing  in supplying plant
5) Outgoing Excise invoice in supplying plant
6) Goods receipt with capture and post of incoming excise invoice in receiving plant.
The CIN FI documents associated with 4th step and 6th step will update the excise accounts appropriately and registers will be updated accordingly w.r.t. excise groups.
warm regards
sairam akundi
warm regards
sairam akundi

Similar Messages

  • Authorisation for transfer of material from group of plants to another.

    Hi experts
    We need to control mvt of goods from group of plants to another group of plants by the same user. The group of plants may be combination of multiple plants or single plant also. Transaction to be checked is MB1B with 541/412 mvt. Basically this requirement is to check transfer of exempted material to Non-exempted material from the point of VAT implication. Can any body share your thought.
    rgds
    Raghu Shetty

    Hi,
    i still have some concerns about the creating new materials solution because we have to create the following relevant things:
    SD: condition record
    MM: infor record
    PP: new BoM
    we have 25 materials which will change profit center, there're a lot extra works we need to do.
    Is there any other way we can try?
    Regards

  • Plant to Plant STO with excise invoice and taxes in one company code

    Hi,
    I have a new business requirement, we want to create only one company code and 12 plants in different states,  each plant will have separate purchasing and sales activity this is ok this can be done with separate excise and series group as ther will not be any issue for purchsing and saling of materisl with exice in each plant , but how we can transfer the material plant to plant  if the plant is in different states we want that the material should be transfer from palnt to plant  with excise invoice only,  as we have the company code common,  how to create the billing document for this, and how to pass the duty from the saling plant and capture the same in the recieving plant. with proper tax entry. Can we do the STO with biiling if the two plants are in single compnay code.
    regards,
    zafar

    hi,
    I am trying to create a Stock Transport Order (STO) with document type UB and item category U. My objective is to transfer material from Plant (supplying plant) 100 to Plant (receiving plant) 1100 within one company code (1000) with STO.
    For this purpose I created a raw material 1434 in plant 1000 with sales org 1 view and in that view entered in delivering plant field 1000 as delivery plant. After that I extended material 1434 to plant 1100 without changing anything what I did while creating the material first in Plant 1000 except in organizational level I entered 1100 in the plant field. I entered Sales org 1000 and distribution channel 10 in organization level for both plant while creating and extending the material. In me21n I chose Stock Transport Order with document type UB and item category as U also receiving Plant as 1100. With this when I tried to save the STO the message, I am getting an error,  Cannot determine shipping data for the material 1434? 
    I am doing solely mm function why I need to create Customer master? In this case plant 1100 is the customer right? 
    Solution:
    1. Mat.(1434) should be maintained in both the plants. (1000&1100).
    2. Should have enough stock in supplying plant(1000).
    3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
    4. Make it receiving plant as a customer in customization.  
        Create customer (xd01) & and define the shipping data for plants in both the plants.
        Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
        In Receiving plant (1100)                         In Supplying plant (1000)
        Customer num.  123345 (for ex.)              Customer num.  -
    (don't fill) 
        Sales org.yyy                                                  
        Dist. Channel                                                              
        Sales div.  y   
    5. Assign doc. Type is "NL" for intra company STO. If  STO is inter company, Assign doc. Type is "NLCC".
        Position doc type is "UB"
        Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
    6. Assign doc. Type is "UB" to u'r plants.(PO)
        Go for new entries 
        Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
    7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO  of the receiving plant(1100).
    8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
    9. Sales people they will provide "out bound delivery num".
    10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
    11. See the stock over view in the receiving & supplying plants.  
    thanking you

  • Excise invoice for Stock Transfer from Mfg. Plant to excisable Depot

    Hi Experts,
    Which tcode (j1iin or j1is) should be used for creating excise invoice in mfg. plant for transfer the goods to exciseable depot and why.
    And if we procure the material in mfg. plant and transferring the procured material to excisable depot then how can we map or assign incoming excise invoice to outgoing excise invoice so that same duty can be transferred.
    Thanks in advance and points on satisfying answers.
    Kuldeep Dahiya
    Edited by: Kuldeep Dahiya on Jul 4, 2008 4:41 PM

    Hi There
    we will be using J1IIN for the transfer for the simple reason that you cannot move the goods from the manuefacturing plant without paying the excise duty.
    regarding your second query I am unable to understand your exact requirement but as per my understanding you will do the good receipt and CENVAT will be credited and outgoing or stock transfer will happen as the regular process afterwards by debiting the excise duty from the CENVAT account
    Hope this will help
    Manu Seth

  • Transfer from plant to Plant

    Hi guys,
    My scenario.
    I have two plant A(Customs warehouse) & B(Manufacturing Plant).
    Generally i will be importing materials to plant B whch is a manufacturing plant.
    In some cases  i will raise the purchase order from B plant and if need to brng the material to Plant A,I amend the PO to plant A.
    I can keep the material in Plant A upto 90days without paying Duty.
    I need to pay the vendor within 30days.
    After paying duty  i need to transfer the material from plant A to B.
    If i  make an STO order the material master price is being picked.
    I need to add BCD,ECESS ON BCD & HCESS ON BCD TO THE MATERIAL COST and transfer the material to Plant B.
    *The material master price should not be picked.*
    Is there any way  to transfer the from plant A to B without using STO route.
    regards
    murugan

    Hi,
    Please mainatain a seperate pricing procedure for imports ( stock transfer from bonded warehouse to manufacturing plant).
    In that assign these condition types in the procedure .
    Then in vendor master of that particular pant(Internal Vendor) assign the schema group.
    regards,
    Vijay

  • Report for stock transfer from plant to plant

    Hi,
      Is there any standard report for  stock transfer from plant to plant .
      If not is there any enhancements to get the above report.
    Regards,
    Ravindranath.

    Hi Ravi,
    U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
    if u want the list of stock transport orders then use tcode ME2N and the input parameter as  item category "U" and generate the report.
    hope it wud have answered ur question
    Reward if useful
    Shawn

  • How to transfer the requirement from one plant  to many plants(STO)

    hai gurus,
    My scenario is as follows:
    1) Plant "A" is Receiving plant.
    2) Plant "B" ,Plant "C", Plant "D" is three production plant.
    3) All the above 4 plant under same company code 1000.
    4) Now plant "A" gets the requirements and pass on to all the three production plants, which
    is based on forecast.
    5) How the requirement to be passed on from plant "A" to all the three production plants namely B/C/D
    under sap
    6) After production of fert under 3 production plants the final products is transferred to the plant "A"
    ware houses which is situated near by plants of B/C/D.
    7) Only one fert material( Fert 1) is common for all three plants produced based on the capacity at all three plants.
    8) Remaining fert material is plant specific, that is for Example Fert 2,3,4 produced only in plant" B"
    Fert 5,6,7 produced in plant "C" and Fert 8,9,10 produced only in plant "D".
    How to map into sap
    waiting for the positive reply
    Regards,
    sekar chand

    Hi again,
    For more details on stock transfer from alternative plant in MRP, see also the attached link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2d5a44af11d182b40000e829fbfe/content.htm
    Regarding FERT1, you can place sales order, but it will not trigger requirements in the manufacturing plant. Also, because all plants are in the same CC it is not a good idea.
    If you are willing to do some manual/external work in determining how much of FERT1 will each manufacturing plant produce, then you can just manually create STOs accordingly. These STOs will generate MRP requirements in the manufacturing plants.
    Regards,
    Mario

  • Process steps for Capital goods transfer from one exciseable plant to another exciseable plant

    Please guide me about below mention process :
    Capital goods transfer from one exciseable plant to another exciseable plant with updation of RG23C register.
    Goods purchase in prev month.

    Company code to company code u have to treat the another company as Vendor/Customer in each company code books. Then the process is same.  Sale order, delivery and billing to the Customer(2nd company code i.e. stock receiving company code).  Then in receiving company code based on the delivery document of other company code GR can be made. and IV.

  • Transfer the material from one plant(non valuated) to another plant valuat

    Hi All,
    How to transfer the material from one plant(non valuated) to another plant valuated.
    Which Goods Movement type we required to use.
    Regards,
    Amit Shah

    Hello,
    Please refer the link below. hope it could be a help.
    stock transfer plant to plant
    split valuation
    Regards,
    Jana

  • Project Transfer From Plant to Plant

    Dear All,
    We have New Plant created 2000.
    1000-nm3-abc25 has been created in 1000 Plant earlier and now we will in process of transfer of this project to 2000 Plant.
    We have Open PR/PO, Advances, Stock, CWIP etc on our Projects. Almost 90% of the Budget has been utilized.
    Please provide stepwise procedures which addresses the complete activities involved in this process.
    Regards

    Hi,
    As per me this will not be possible.
    Because you have Open PR/PO, Advances, Stock, CWIP etc on our Projects. Almost 90% of the Budget has been utilized.
    In SAP,I don't think so any procedure will be available for such kind of Project transfer from Plant to Plant.
    Regards
    Sandeep

  • Capital goods transfer from plant to plant

    Dear All,
    Is there any possiblity to transfer capital goods through STO in R/3 between 2 purchase organisations and separate palnts under one legal entity.
    Best Rgds
    Suma
    Edited by: Suma Mani on Mar 19, 2009 11:53 AM

    Hi,
    Yes you can transfer capital goods from one plant to other plant using STO order from one purchase organization to other purchase organization.
    Ask MM to create the STO order for the same & transfer post the material from the sender plant to receiver plant & do GR against the receiving plant.
    orelse you can do transfer posting from one plant to other plant using MB1B transaction with movement type 301,309,311 or 415.
    Regards,
    Raj

  • Transfer of Inventory from One Plant to another with in the same company code

    Hello All,
    Can you please let us the possible option's for transfer of Inventory from one plant to another plant in different geographical location with in the same state.

    PLANT TO PLANT TRANSFER IN THE DIFFERENT GEOGRAPHICAL LOCATION UNDER THE SAME COMPANY CODE
    Assume - plant 1 - 1000 ; plant 2 - 2000.
    From 1000 - 2000 u shall transfer the parts using 641 movement By creating a Stock transfer order with the following conditions.
    1, Master & source list to be extended for both the plants vice versa. including accounting & excise view
    2. Create an Sto po in ME21n  for one time only /ME31N as scheduling agreement
    3. Generate pick list and do Post goods issue in va02.
    4. Create excise invoice & do the Gate entry in the other plant & stocks are up loaded.
    5. In India excise rules are becoming stingent & you have to inform both the Excise ranges before starting the transactions

  • Transfer of  material from Process plant to grading

    I am having an issuse when I am transfering the material form process plant to grading plant, i have to generate a excise invoice and delivery packing slip.
    so how to configure the same.

    PLANT TO PLANT TRANSFER IN THE DIFFERENT GEOGRAPHICAL LOCATION UNDER THE SAME COMPANY CODE
    Assume - plant 1 - 1000 ; plant 2 - 2000.
    From 1000 - 2000 u shall transfer the parts using 641 movement By creating a Stock transfer order with the following conditions.
    1, Master & source list to be extended for both the plants vice versa. including accounting & excise view
    2. Create an Sto po in ME21n  for one time only /ME31N as scheduling agreement
    3. Generate pick list and do Post goods issue in va02.
    4. Create excise invoice & do the Gate entry in the other plant & stocks are up loaded.
    5. In India excise rules are becoming stingent & you have to inform both the Excise ranges before starting the transactions

  • How to transfer all materials from one plant to other plants?

    How to transfer all materials from one plant to other plants?

    Hi
    To transfer stock in one step  between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
    303 Transfer posting plant to plant in two steps - removal from storage
    305 Transfer posting plant to plant in two steps - placement in storage
    to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
    hope it helps

  • Plant to plant stock trasnfer with excise duty

    Hi,
      We have one company code and two plant assign to it , now one plant is Ma=fg. plant  and other plant is depot plant  , now I have purchase  material with excise duty in mfg. plant and excise is capture with J1IEX aprt1 and part2 is done   now our requirement is we wan to sal that material thorugh depot plant  so for this the entry should be there in RG23D  so can you giude or give some link for this so that material from plant A  to be trasfer to depot plant , with excise then we can sale that  material thorugh trading plant.
    regards,
    zafar

    Hi,
            Steps to Stock transfer from one plant to another plant as below... ..
    1. First enable Sales View of material that you want to transfer (MM01) and  fill required data i,e.
    Plant  Select Plant where Material transferred.
    3)     Sales Org. Data1 Menu   Select Division u201851u2019 Cement.
    4)     Sales Org. Data2 Menu  Select Gen Item Cat. Grp u2018 NORMu2019
    5)     Sales General Plant Data 
    A)     Availability check u2018KPu2019
    B)     Loading GRP u20180001u2019
    C)     Profit Center u2018Plant Codeu2019
    2. Create Condition Records  (VK11)
    3.Create Sales Order                 (VA01)
    4.Create Outbond Delivery     (VL01N)
    5.Create Billing Document      (VF01)
    6. Excise Invoice                          (J1IIN)
    7. Printing of Excise Invoice and Commercial Invoice                           (VF02)
    Regards

Maybe you are looking for