Transfer of Employee responsible from CRM to ERP

Hello,
I've replicated employees from ERP to CRM. I create a new corporate account in CRM. I assign an Employee Responsible. On the relationship, I assign a sales area and the partner function Sales Representative. I also maintain other sales area data like payment terms. I transfer the account from CRM to ERP. The Sales Representative is not transferred to the partner function PE in the customer master in ERP. Why not?
I have done the following IMG-settings:
IMG: Customer Relationship Management => Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from SAP ECC into CRM
Partner function ERP    Partner function CRM
VE (PE)                 00000014 Employee Responsible (CRM)
IMG: Customer Relationship Management => Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from CRM into SAP ECC
Partner function CRM    Partner function ERP    Type ERP
00000014                VE                      PE
When I at a later stage edit the customer in VD02 in ERP, I add partner function VE manually.
When I then open the account in CRM, the sales representative added in ERP appears with the relationship "Has the Responsible Business Partner", CRMH06. I would have expected it to be "Has the Employee Responsible".
Any ideas are greatly appreciated.
Kind regards,
Johan Wigert

Hello
Presently i am working on the same scenario,where i am trying to add employee in ECC and want to have the same BP in CRM under relationship tab as Employee Responsible but i am getting the following bdoc error
BP relationship C8323A4AA5D53555E1000000A05CCCAD 496E713643771182E1000000A05CCCAF BUR011: following errors occurred
Message no. BUPA_MW_EXCHANGE020
Relationship IEQ0002007496 IEQHR10048702 IEQ0000000000000000 do not exist
I maintianed the said custo settings in CRM with rel cat BUR011
Note: Employee number in ECC is say.. 9999 but in CRM the same employee is replicated as HR9999,hence will this creates any problem for relationship not to replicate from ECC TO CRM.
please let me know what needs to be corrected
Regards
Phani
Edited by: Phani Kumar on Jun 19, 2009 2:28 PM

Similar Messages

How to transfer hierarchy level 1 or level 2 in Contract from CRM to ERP?

Hi, Pro,
        I face a requirement that hierarchy in contract transfer from CRM to ERP by RFC, but the material number what we wanna to entry are maintained in hierarchy 3. Therefore after you entry the hierarchy 1 or 2 that not 3, it occur an error warning stop the process.
       Since I test manual entry a hierarchy by added a character '*" behind, it save and successfully archived that can using hierarchy 1, 2 and 3. I thought I solved the problem. But our ERP source is from CRM, so the only confuse me is that it can not transfer character '*' from crm to erp when it accour error like can match the hierarchy '12345*' .
      Pls help me solve this solution.
Thanks a lot.
Lorry

I am using the bapi BAPI_CONTRACT_CREATEFROMDATA and BAPI_CUSTOMERCONTRACT_CHANGE.

Prevent replication of Contact Person from CRM to ERP

Hello,
we replicate business partner with role "Solt-to Party" from CRM to ERP.
But we want to prevent that the contact person of the Sold-tp Party is relicated too.
How we can realize this?
Thanks for help
Ronald Ploß

Hello,
I have changed both objects (BUPA_MAIN / BUPA_REL) to Simple intelligent (msg). But in BUPA_REL you can only filter on BPARTNER.
In the scenario we need BUPA_REL for the replication of Employee responsible.
Thanks and regards
Ronald Ploß
Edited by: Ronald Ploß on Jun 23, 2008 4:19 PM

Settings for transactions replication from CRM to ERP

Hi,
Can you explain or point to documentation on what settings we need to configure in CRM and ERP side to replicate the transactions such as quotation, Sales Order etc from CRM to ERP?
As I understand we can use Adapter Business objects in CRM to transfer the ERP documents to CRM transactions?
What is the method for transferring in the other direction?
What are the customization things we need to maintain in both systems? Such as having the same transaction and item category types defined in both systems etc..
Please clarify this replication process.
Thanks

Take a look at the following notes:
620139
642944
888665
889051
And for replication of customazing and data take a look at building blocks B09 and C03.
However be aware that you will have to create transaction types and item category types on CRM, because this customazing can't be synchronized from ERP. So it has to be done manualy.
Regards.

Replicating BPs from CRM to ERP

Hi guys,
Maybe i know what are the necessary steps to replicate CRM -> ERP?
Could someone help me?
thanks!

Hi Lee,
SMOEAC is the transaction code which is responsible for data to flow from CRM to R/3.
Now if you want BP Changes done in CRM to move to R/3, then goto tcode SMOEAC.
1. Select the Object Type as Site - Click on display button.
2. Select R/3 site and just expanding on it - we will get subscriptions assigned for the site R/3
3. Create the following subscriptions.
a. All Business Partners,
b. All Business Partner Relationships,
c. All Business Partner Hierarchies Subscriptions.
Hope this helps.
Thanks.
Best Regards,
Arun Sankar.

Error while serching by employee responsible in CRM Interactive reportong.

Hello,
CRM interactive reporting experts ,
i am getting a error while serching records in report using employee responsible as filter criteria .
This error only come when the employee is assign to an org Unit .
please help me if any one faced this issue and help me to resolve. it is really high priority to me.
attaching error detail .

Hi Dev,
You may need to check the authorization error if any in SU53.
As soon as you get this error, try to check SU53 in CRM GUI.
Regards,
Mandeepak

UPLOAD OF EMPLOYEE BP FROM CRM TO ECC

Hi all,
Is it possible to upload Employee Business Partners from CRM to ECC system.
as per client business process we create Employee Business Partners in CRM system and they need to upload in to ECC system.
I have worked on downloading of Employees data from ECC to CRM using ALE IDOC.
Please suggest whether it is feasible or not? If standard solution is available kindly let me know.
Your help will be highly appreciated.
Best regards,
Raghu ram

Hi ,
The common practice is to download "Employee" from ECC to CRM thru ALE IDOC ,
But you can also take another approach :
1) Create employee as business partner in role "BUP003" "employee" in SAP CRM .
you can create manually or you can use BP upload program in CRM.
2) You need to configure "internal number range " for business partner "emplyee " in CRM , and "External " in ECC Backend
3) set up middleware for replication of BP from CRM to ECC .
4) Business partners - EMPLOYEES create in CRM will be replicated to ECC as Business partner ( and not as HR employee )
hope this helps,
PD

How to replicate a customer from CRM to ERP?

Hi you all!
Can anybody help me!? A allready made the settings to replicate the ERP clients to CRM customers, but now I want that CRM be the leading system for customers creation, and I don´t know how to do the replication!
Help Please

Hi,
For replication from CRM to ECC we need to go thru site setting in SMOEAC. This is what you need to do:
1. Using tcode SMOEAC create a site for OLTP.
2. Assign the subscription 'All Business Partner (MSG)' to this site.
Please check this link for site creation information.
http://help.sap.com/saphelp_crm50/helpdata/en/cc/da6289fd126e4581bbc4f509dede10/frameset.htm
You can find more regarding site information in help.
Hope this helps,
Karuna.

How it is possible to debug the transfer of an order from CRM to ECC

Hello,
how is it possible to debug the coding when a CRM sales order is replicated to R/3?
The outbound of SCM APO and/or the inbound of SAP R/3?
Thank you in advance.

Hello,
Data flow from CRM to R/3 is like below:
- Write the data to outbound queue of CRM
- Wrtie data to Inbound queue of R/3
- Validation and Save in R/3
So you can debug from CRM outbound queue, by de-registering the queue in txn:SMQR
R3AI_<OBJECT-NAME> In case of Initial Load
R3AR_<Request-Name> In case of Request Load
R3AD_* In case of Delta load
Similarly you can de-register the queue in R/3 as well to debug the R/3 inbound queue.
As you might be aware that MW generic module CRM_UPLOAD_TO_OLTP, would be called for any data transfer
between CRM to R/3. You can start debugging from this point.
Hope this helps!
Best Regards,
Shanthala Kudva.

Delta Changes from CRM to ERP

Middleware gurus,
Our delta changes with the BPs from CRM to ECC are generating a "Message type is unknown". Has anyone ever seen this? It works fine from ECC to CRM. We're on CRM 5.0 and ECC 5.0.
Does anyone have any clue???

Hi,
Please check the Master Data Syncronization settings under ERP->SPRO->Cross Application Components->BP-> Master Data Syncronization.
You need to define the required BP Role, Groups and map accordingly to Account groups. Since you are facing problem with CRM-> ERP, you need to check the settings for CRM->ERP only.
I hope this helps.

Wrong exchange rate is transferred from CRM to ERP R3 via BDoc.

Hi All,
In CRM system, whenever quantity contract(QC) is created, it is sent to R3 with all details via Bdocs
Exchange rate of QC which is present in CRM is different than in R3.
But when same contract is opened in R3 in change moce and do some changes it re determine the correct exchnage rate and updates the same in contract.
But again when same contract is changed in CRM then again updates are sent to R3 with previous wrong exchnage rate.
Please tell how to see which exchnage rate is available in Bdocs at the time of sending.
Why is it not updating as per the exchange rates in R3.
Please give your valuable inputs on this.
Regards,
Prashant

Hi,
Yes We checked the Bdoc. Currency rate is correct in CRM side but when it is sent to ECC, it changed to something else value which does not exist in TCURR table of both systems.
Regards,
Prashant

Transfer of data from APO to ERP via IDOC

Hi,
I know we can transfer the of transactional data(Planned orders) from APO to R/3 is done via CIF.
Suppose if I need to transfer the same via IDOC instead of CIF how can I do it?
Let me know the steps to follow and way to find out how the data got transferred by IDOC?
For e.g. When I have transfer a planned order from APO to ERP, the data should be populated in the IDOC LOIPRO01 on the ERP side.
Cheers,
Simha.

Hi,
For a thouht If you want to use that IDOC data to be transfer to an other system from R/3 then let the data flow through CIF and in INBOUND exit wright code to create IDOC.
But Iam not sure whether it works.
Please eloborate requirement.
Regards,
Kishore Reddy.

Error in ERP system while copying the document from CRM system

Hi Friends,
I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022     Product cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
u2022     Product cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
also
with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
"input data for industrial material is not fully"
regards,
sunil

Hi Sunil,
You are getting error in the Sales Order is because of Master Data.
Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
Please maintain the master data in R/3 side & download into CRM Side.
For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
Use following link for downloading Customer Master & Material master.
http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
Best Regards,
Rajendra

How do replicate the contact person to ERP partner fuction from CRM

All experts,
I already replicated contact person from CRM to ERP,but the contact person just appeared in tab contact person in ERP customer general data.
Actually,when i created contact person relationship in CRM,i could assgin contact person to a salse area,so I want to replicate contact person to tab partner fuction in customer sales area data in ERP. pls give me a light. thks
Raymond J

Hi Raymond,
I believe the contact person in question is assigned only as a partner function in R/3. Therefore you will only see the usage of that BP as a partner function, but not the relationship specific data.
You will need to create a contact person relationship for the BP.
So the relationship specific data will not be visible for a contact person in R/3 which is only assigned as a Partner Function in R/3.
Can you please check this on your system?
I hope this helps.
Best regards,
Ita

Organization structure From CRM -- ERP

Hi
Can we replicate Org structure from CRM system to ERP system.
If Possible Please tell me when such requirement comes.
and also prvovide me the steps or config guide to carry out replication from CRM to ERP system if such process is possible?
thanks

Hi Michael,
Thanks for prvoidng me suggestions.
I think you have not understood my questions. I already worked with replication of Org structure from ERP to CRM.
But i dont have idea about replication of Org structure from CRM to ERP.
My question is
1 Can we replicate Org structure from CRM to ERP.
2.If yes when that situation comes. also How.
Thanks for your understanding.
regards,
Sunil

Transfer of Employee responsible from CRM to ERP

Similar Messages

Maybe you are looking for