Transfer of Material between plants

Dear Gurus,
I have a scenario, i have two plants. My material is placed ion plant A in unrestricted project stock and i want to transfer this material to plant  B( plant B is non-valuated). kindly tell me the movement type for this. and any settings to do this.
Regards
Johi

hi,
Solution:
1. Mat.(1434) should be maintained in both the plants. (1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.  
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
    In Receiving plant (1100)                         In Supplying plant (1000)
    Customer num.  123345 (for ex.)              Customer num.  -
(don't fill) 
    Sales org.yyy                                                  
    Dist. Channel                                                              
    Sales div.  y   
5. Assign doc. Type is "NL" for intra company STO. If  STO is inter company, Assign doc. Type is "NLCC".
    Position doc type is "UB"
    Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
6. Assign doc. Type is "UB" to u'r plants.(PO)
    Go for new entries 
    Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO  of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
11. See the stock over view in the receiving & supplying plants.  
note :- if dont want the billing document then dont assign the delivery type(nl) to the doucumnet type(nb).
for project stock transfer use 415 q movement type at the time og goods issue.
Thanking you

Similar Messages

  • Transfer stock of material between plants

    Is it possible to transfer the stock of material between plants?

    Yes, stock transfer between plants is possible.
    1. [One Step using Transfer Posting 301 movement type|http://help.sap.com/saphelp_470/helpdata/en/4d/2b90e943ad11d189410000e829fbbd/content.htm]
    2. [Two Steps using GI & GR|http://help.sap.com/saphelp_470/helpdata/en/4d/2b90f643ad11d189410000e829fbbd/content.htm]
    Removal from storage happens with movement type 303 from Plant 1. Then do the posting using movement type 305 to store in storage of Plant 2.
    Check the transaction code MB1B.

  • Transfer of goods between Plants

    I have 2 manufacturing plants- Plant 1 and Plant 2.
    I have to transfer the excisable material from Plant 1 to Plant 2. In this case I have to transfer the excise duty paid from Plant 1 to Plant 2 also.
    The STO is without delivery. We are using movement type 351.
    I have created STO and did goods issue using 351.
    How to transfer excise duty? What is the step?

    Hi,
    Procedure to Create Excise Invoice: -
    From the SAP Easy Access screen, choose Indirect Taxes ® Sales/Outbound Movements ® Excise Invoice ® For Other Movements ® Create/Change/Display ® .
    On the selection screen, enter data as required, including:
    Ref. doc. type: MATD (Material document)
    Doc. number: Transfer posting number
    Vendor: Leave this field blank
    Customer: The customer account number of the receiving plant
    Choose .
    The system copies the details from the transfer posting.
    For each item:
    Enter the net assessable value
    Check and change the excise duty rates
    Save the excise invoice.
    If you are using the one-step procedure, the system creates and posts the excise invoice. Otherwise, the system saves the information but does not make any postings: it now has to be verified.
    Verifying and Posting Excise Invoices
    Use
    You follow this procedure to verify that the information in an excise invoice that has already been created, and to post it once you are satisfied.
    Procedure to Post Excise Invoice: -
    From the SAP Easy Access screen, choose Indirect Taxes ® Sales/Outbound Movements ® Excise Invoice ® For Other Movements ® Post Excise Invoice.
    Enter the internal document number of the excise invoice.
    Choose Release to accounting.
    The system displays the excise invoice. The excise duty that is to be posted is displayed at the foot of the screen, which you can change if necessary.
    To access the balance utilization, choose .
    To display the balance available on the CENVAT accounts, choose Account Balances.
    Save the excise invoice.
    The system generates the accounting documents.
    To print the excise invoice, choose "Print" button.

  • Transfer blocked stock between plants.

    Hi everyone !
    Pls. I need to transfer blocked stock from plant A to plant B.
    The point is stock must be blocked in plant A and then I have to transfer to plant B, but stock must always be blocked just to avoid the selling process.
    Thanks a lot for help !
    Regards.

    if you want do it with SD deliveries, then the answer is: not possible
    but pure MM movements........
    By changing the field selection for movement type 325 you can open the field 'receiving plant'. this will then allow a plant to plant movement of blocked stock. Whether you should do it or not is of course up to you.
    I doupt that it is possible to do a 2-step movement for blocked or QI stock, because the 303 post the quantity to transfer stock. And transfer stock has no sub categories like QI or blocked. It is on the same level.
    There is an OSS note 448761, it is for another transaction, but it might help you a bit to understand.
    amongst other things following is said:
    There are not two-step movement types for blocked stock since no stock in transit, quality inspection exists .
    Edited by: Jürgen L. on Jun 10, 2009 9:46 PM

  • Transfer Special Stock between Plants

    We would like to transfer a special stock assigned to a sales order  from one plant to another plant with delivery documents. We doesn't want to use the transaction MB1B with the code movement 301E which does the transfer in one step without devlivery document. We would prefer to use the STO procedure but we doesn't know how to assign the special stock to the stock transfer order. Is there any solution?
    Thanks.
    Edited by: Couny Christophe on Aug 18, 2011 3:58 PM

    it is possible see OSS note 92231
    643 : Goods issue for a cross-company-code stock transport order via Shipping
    645 : Goods issue for a cross-company-code stock transport order in one step via Shipping
    With these two movement types, you can work with both valuated and nonvaluated sales order stock (E).

  • Transfer between Plants accounting.

    Hi experts,
    We are transferring a material between plants using movement type 301 (MB1B).
    Material price control is 'V' in both plants, nevertheless in some transfers, the accounting document shows an amount in the G/L Account informed in the transaction AUM from OBYC.
    We though this account shouldn't appear as the price control is 'V'.
    Why is this account appearing? How can we find out why is this account appearing?
    Thanks

    Hi kailasugale,
    Thanks for your answer.
    We are trying to reproduce this behaviour in our sandbox system. As we don't know why had happened in our Productive System.
    The price in both plants was different before the transfer, as the stock in the receiving plant was zero, after the transfer both prices became equals. In this case the account of transaction AUM did not appear.
    In your link we read: "Price differences can arise for materials with moving average price if stock levels are negative..."
    So we made a transfer with higher amount than the available in order to get a negative stock. Despite this action the account in the AUM transaction did not appear.
    We have no idea how to reproduce this situation in the productive system.
    Thanks

  • Stock transfer between plant to plant in blocked status

    Hi Gurus,
    Can anybody know how to use some mov. type to transfer restricted status between plant to plant?
    Many thanks in advanced.
    Luiz Geraldi

    Luiz,
    You cannot move 'blocked' or 'restricted' stock in this manner. This is not supported in ECC 5.0 and I would not think ECC 6.0 would be any different in this regard as this is a basic rule within standard SAP although I would think that in certain situations it would be beneficial to be able manage this in a simple move. 
    - As others have correctly pointed out, you have to change the stock status to 'unrestricted use', transfer/receive it (either using mvt 301, 303/305, 351/101, 641/101, 643/101 etc depending on the stock transfer mechanism used between the plants) and then finally change the stock status back to 'blocked'.
    - Another option would to be to post an inventory adjustment using mvts 701/702 in both the plants and then change stock status in receiving plant to 'blocked'.
    - Design a custom ABAP program to perform the sequence of movements in a single transaction. I think it would be important to get the timing right to avoid incorrect booking of stock.
    - The movements could be also be linked in a single transaction using a workflow solution although I am not sure how simple or complex the solution might be.
    Unfortunately, the quantity strings associated with movement types are hard-coded by SAP. So, it would not be possible to achieve this move using a custom movement type without any modifications.
    Hope this helps.
    H Narayan

  • Transfer of Configurable material from Plant 1 to plant 2

    Hi expert,
    We have two plants. In plant 1 we manufacture the material that is configurable, We want to transfer that material to plant 2 and sell it without running the MRP and costing it is as good as procured externally.  It is possible to sell the material in plant without MRP run and also we have changed the valuation class from 7010 to 3000, checked the do not cost indicator. But it is not
    allowing us for delivery , the error we get is  "  Create delivery not allowed  (Sys. status Cost, Object VB018004407000010)
    Is it related to costing?  We don't want to cost it. Please help us to fix this.
    Thanks & regards
    Veda

    hi,
    I think you can do this, just transfer your ZTABLE to the client 2 and use SE09 to transfer
    But do you want to append the contents into client 2 or transfer a new ZTable
    If you just want to append I dont think its possible

  • Transfer of Goods between Center (2 Steps MM-SD)

    Hi Friends;
    I have a little problem to which I have done several tests and did not have much success to complete the activities related to the transfer of goods between centers using the procedure I describe below:
    - ME21N -> Creation of Purchase for transfer using the category UB (Stock Transport Order);
    - VL10B -> Process documents for Shipping (using Purchase Order);
    - VL02N ->  To Process Delivery  (Picking and deposit);
    - J1B3N -> Issue of the tax document (invoice);
    - MB0A -> Entry of Goods to Purchase Order;
    The problem is that when I am doing the PO (First part of the process) I notify the PO type, in the field I meet the supplier center provider, I meet the item and the center of will receipt the goods. After all information completed on the screens of Purchase Order (ME21N) the system displays the following message.
    u201CNot possible to determine shipping data for material 9999999u201D
    u201CMessage no. 06280u201D
    As this is the beginning all of process, I am not able to continue. I already made several checks which I will describe below, and still am not successful in completing the process.
    u2022     The material is already expanded to the Center Supplier and Receiver;
    u2022     The material is already expanded to SD View, with the sales organization, distribution channel and sector of activity properly;
    u2022     Customer (center) already expanded to the Organization of Sales and Channel Distribution properly;
    u2022     On the table is expanded KNVV you both for the organization's sales center provider for the center as recepitor;
    u2022     On IMG:
        o     It was the assign of the sales organization of the center (Materials Management -> Purchasing -> Purchase Order -> Set up     
            Transport Order -> Define Shipping Data for Plants);
        o     It  was assigned to the Shipping Points (Logistics Execution -> Shipping -> Basic Shipping Functions-> Shipping points and
            Good Receiving Point Determination -> Assign shipping Point). Therefore the u201CShipping Conditionsu201D is properly linking to
            Custumer Data Master and  Loading Group is properly to Goods Master Data.
    Even with all these settings made, I am not having success in the process of creating of PO  and start the procedure for transfer of material between centers and so I ask the help of colleagues to help me find what is still missing or set up in process that can make it flow.
    Beforehand, Thanks a lot.
    Vinicius

    Hi ,
    GOTO IMG -> MM->PURCHASING ->Purchase Order ->Set up Stock Transport Order->Define Shipping Data for Plants-
    here for both receiving and supplying plant give the same sales org , distridution channel and division .
    And in receiving plant maintain the customer no .
    And one more thing do the PO as document type NB (standard order ) , then maintain delivery type NLCC against NB in customizing (GOTO IMG -> MM->PURCHASING ->Purchase Order ->Set up Stock Transport Order ->Assign Delivery Type and Checking Rule )
    Regards,
    Anupam
    Edited by: Anupam Halder on Jul 28, 2009 7:07 PM

  • Stock transfer between plants - Material used is Asset material

    Hi All,
    We are using TAXINJ.
    We are doing stock transfer of an asset material from Plant A to Plant B.
    Proceedure followed as below:
    Supplying Plant -
    STO PO - ME21N
    Outbound Delivery -  VL10B
    PGI - VL02N
    Billing - VF01
    Invoice DOc - J1IIN
    Receiving Plant-
    Goods reciept - MIGO
    Capture excise thru - J1IEX
    When capturing excise ETT is GRPO and the subtransaction type used is 01
    We are getting the below message:
    "No Cenvat amount to be posted"
    "No Cenvat Amount to be reversed"
    We are not getting any message when we are not using subtransaction type 01, and we are able to post part2 entries.
    Pls suggest.
    Thanks in advance
    Pavan.

    Hi Deivakaniraja,
    Thank you for your suggestion.
    Still have a querry....
    The subtransaction type that is defined is not conventional.
    We define various subtransaction type like 01, 02, 03, 04, but there is no standard that 01 to be used only for subcontracting.
    I understand that IP is defined only for Import postings.
    Can you pls brief me.
    Thank You in advance.
    Regards
    Pavan

  • Material Transfer between plants

    Dear Experts,
    We are in need of sending the material from one plant to another plant on job work basis.
    We need to inward the material in the recieving plant and further process needs to be carried out.
    Then this needs to be returned to mother plant with the value addition done in the receiving plant.
    we can't carry out the process with "Stock transfer" as one of the plant is in "Excise free zone"
    Venkatesan

    Hi,
    Thanks for the information.
    If I use the subcontract Process the material Qty and value will show as thrid party stock of supplying plant.
    In this case we want to inward the material in the receiving plant to carry out certain value addition.
    The requirement is to transfer the material from one plant to another without stock transfer route and return to mother plant with
    stock control of receipts and issues at both plants.
    Venkatesan

  • Automatic PO from PR from MRP for transfer between plants

    Hi,
    We want to use the automatic creation PO with tcode ME59. this scenario is clear when the purchase is from a supplier. but ¿this can be used also for transfer between plants?
    For example we don´t have info records for transfer this material to one plant to another and this is a requirement in automatic po
    The PO type is also different when transfering the materials between plants
    The PO does not relate a supplier in header, instead it has the plant code.
    However I tried to execute the automatic creation of PO with ME59 and I obtain the error below
    Thanks
    Jorge G

    Use ME59N,
    But before using ME59N, you have to configure something, we know in ME59N, system will take default document type as NB automatically. (Check the sap note 924105, 114213, 994209)
    You have to set the control T for the document type, so system will take the supplying plant instead of vendor.
    Only then you can create automatic PO from ME59N.
    I've tested that and I've done it successfully.
    PO

  • SD billing document (transfer between plants) error in document splitting

    Dear Gurus.
    I have the following scenario.
    New GL activated
    Zero balance on Profit Center.
    SD billing document is created after the shipping of material (internal transfer) between 2 plants belonging to the same company code.
    I have several user exits activated and they are not well documented if activated.
    Case1.
    The billing document is usually created with materials populated with the same Profit Center.
    In Tr VF01/VF02 the function: Release for Accounting is executed and no accounting document is created (OK cause they belong to the same company code), this function is just closing the cycle of the billing document to set the status as completed.
    Case2.
    Billing document containing several materials with more than one Profit Center
    During the execution of the function: Release for accounting the following error is gotten: Position 1 is not populated with Profit Center - apparently caused by the splitting rule - financial document creation -  the status of the billing document is not set to Completed, is kept as opened.
    As I commented In case 1 I do not have any accounting document (no error message)
    Doubt 1
    Is it possible that the splitting rule is being checked even though no accounting document is created (remember billing in a scenario of material transfer between plants belonging to the same company code)?
    Apparently in case 1 I do not have any error cause the splitting rule is deriving the profit center in a passive basis: Inheritance.
    In the other way, in case 2 the splitting rule is trying to derive the profit center in an active basis. In my configuration I actually do not have any configuration for the combination of transaction, variant, position to be derived, position basis.
    Doubt 2.
    Is this the standard behavior of SAP?
    Could this be caused by a user exit not identified?
    thanks in advance for any advice provided
    Regards vpa
    Valentin PA.
    2.
    In case 1 is clear that as only one profit center is shown theoretically the inheritance rule is populating the Profi

    It would be possible, I suppose.  You could generate Idocs from the SD system (or an interface file) and import that info into the FICA system.  Of course the FICA system could not know about the sales order etc - so limited research abilities would exist. 
    For the second question, that would only function in a single system scenario, and yes the SD document flow would reflect its clearing status in FICA.
    regards,
    bill.

  • Stock Transfer between plants two steps.

    DearAll,
                 We are using the scenario stock transfer between plants two steps.in the source plant we are issueing the goods  with on 303 movement in MIGO with Remove from storage option. in the receiving plant we are receiving the goods with refernce to 303 material document in MIGO with place in storage option.
              we are using the version SAP 4.7.
    my problem is at the time of goods receipt SAP is allowing to the posting date less than the source plant 303 document date. it should allow the posting date as Greater than equal to source plant document date at the time of GR.
    Any standard pracktise is there.
    for example  source plant 303 document date is 08.06.2009 wrongly i have entered the receiving plant 305 document posting date as 06.06.2009 it is allowing to post it is not throw any information. it should not allow to know.
    i want to control this. any standard controls is there. kindly help.
    Regards
    P.Anandhakumar
    Edited by: Anandhakumar Palanisamy on Jun 9, 2009 10:46 AM

    Except user exit , Is it possible any standard functionality.?
    why SAP not controlled this?.
    this is SAP bug or not?. kindly clarify..
    Regards
    P.Anandhakumar....

  • Error when doing two step transfer between Plants with split valuation

    Hi expert,
    I´ve activated split valuation for Material X , it has three Valuation types ( NEW, REPAIR and DAMAGE ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
    Use one-step procedure for transfer posting to mat. subj. to valuation
    Message no. M7048
    Diagnosis
    In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
    Procedure
    Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
    The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

    Hi,
    What do you mean with "inconcistent to my storage type definition?", is that mean i can process two step transfer without using PO/delivery process or one-step movement? coz according to business requirement, we must use two step transfer considering to the distance between plants is so far and we want to make it the simple way so that PO/Delivery process isn't better solution. I think, this is an standard procedure all company over the world can use but just the reason of split valuation the system can't execute the transaction.
    Is there any config i miss to? is there any user exit i can use for this requirement? please help me..
    thanks,
    AJ

Maybe you are looking for