Transfer of No range interval  to production server

Hi,
Changed the existing number range interval for billing types  in development server.But the system didn't generate any change request number.Then how to transfer this to production server?
Plz guide me what to do?
Regards
Subhasish

Please read the following message that appear when you try to save any changes to number range object.
The number range intervals are not included in automatic recording of customizing changes.  Transport of all the changes made within number range interval maintenance must be triggered manually.
In the initial screen for number range interval maintenance choose the function Interval -> Transport.
Please note the information that you get when transporting number range intervals.

Similar Messages

  • Ale to transfer data for quality management in production server

    Hello Gurus ,
                            I want to transfer data from development to production server which method is easy and preferable by ale
    or by bapi .                                                                               
    Thanks And Regards
                                                                                    Shrikant Ambulkar

    i have close this thread

  • Transfer data from Test to Production Server

    Dear All
    I want to know how to transfer data from test server to production server.
    Lets say we have done all the setup steps of GL, and we have also feeded chart of accounts, journal entries, recurring etc. at our test server. Now we want to shift our data from Test Server to Production Server.
    What can be the procedure?
    I shall be really thankful.
    Best Regards
    Muhammad Habib
    http://mhabib.wordpress.com

    Dear hsawwan
    Thanks for your reply. Can you send me this document via email. My email id is: [email protected]
    Secondly can you please tell me how to just transfer my Chart of Account.
    I shall be really thankful to you.
    Best Regards
    Muhammad Habib

  • Transport number ranges to production server of withholding tax

    Hi
    I have created the number ranges in the development server and saved in one request, but the number ranges are not working in Production system. How can i again transport the same request in production system.
    I tried to transport it again but it is showing in grey mode.
    Thanks

    Number ranges are suggested to be maintained directly in the production client.
    Even if you want to transport, Go to SE01 and check that your trans then port include the number range you want to transport.
    Regards,
    SDNer

  • Number ranges in production server

    I have created the following number ranges in production server
    $$$$     IN     EX
    $$C     IN     EX
    $$O     IN     EX
    $$S     IN     EX
    $$$$
    EX     00000001     49999999     0             (External checked)
    IN     50000000     99999999     50000024
    $$O
    EX     20000000     22999999     0 (External checked)
    $$C
    EX     30000000     32999999     0 (External checked)
    $$S
    EX     40000000     42999999     0 (External checked)
    But when I created the org unit it is taking internal and the number is assigned 50000000.
    I want all the org units to be 20000000 to 22999999 and external.
    How should I do it?

    Hi,
    For org units if you require the  ID to belong to the external number range, you will need to specify the ID of the org unit and then hit CREATE.
    If you do not specify the ID, it will take the next number available under the default internal number range which is
    $$$$
    IN 50000000 99999999 50000024
    Hope this helps.
    Regards,
    Shreyasi

  • Production order number range after taking the back up from production serv

    Dear all,
    My client did a back up activity yesterday from production server to disaster recovery server.
    After completing this activity they shut down there production server to do the testing of this new server.
    Production guy converted the planned order to production order and he got a number say 2000064732, but the current number in number range is 2000080139.
    But same guy created order one day before in production server that time the order number in 2000080138.
    After 2 hours the system (by that time he has create more than 50 orders) started assigning the number as per the current number. Ex: 2000080140,141,142u2026
    As per my observation they have maintained buffer as 20. As per buffering logic system has to skip in forward direction not in reverse direction.
    But in our case the system skipped in back word that nearly 16000.
    So please help me to find out the reason why the system assigned those number and on what basis.
    Thanks for your help
    Regards
    Ramesh

    See SAP note 62077, your application server was shut down, the numbers that are left in the buffer (that is, that are not yet assigned) are lost. As a result, there are gaps in the number assignment.

  • Error while transfer request from development to production server

    Hi,
    We have generated some request on development and while transer the same on production server, following error message appear "Transport control programe tp ended with error code 0247"
    Pl give us the solution.
    Regards
    Suresh

    hi
    repeat your transport run
    or re-create transport and execute again.

  • Query related to request transfer from development to production server.

    Hello,
    I am transfering request from development to production server , the error occured is object REPT of particular program is inactive.
    What is this error ?
    Plz give answer as early as possible .
    Thanks in advance.
    Vikram.

    Did You try my solution'
    Hi..,
    go to the request in SE09...
    in the menu
    Request/Task->Complete Check-> Display Inactive objects..
    you will get the objects which are inactive and u can active them there itself.
    santhosh

  • How to transfer local workbench request to production server

    Hi,
    All my workbench requests are saved under local change request node instead of being in the production system node. How to release and transport these requests to the production server.
    Kindly help.
    Regards,
    Sriram

    Hi Sriram,
    In SE01 check whether u have given value for target system or not.
    Target system is ur production system  .Check whether u have specified it in SE01 for ur transport request.
    If u have not specified target system for ur Transport request it will be shown in Local Workbench request
    Regards,
    lakshman.
    Edited by: Lakshman N on Aug 4, 2009 9:31 AM

  • Vendor master Creation in Development Server and Production Server - ASAP

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
    Hello everyone,
    I just want to know that how to transfer the vendor accounts or vendor master data from dev client to Prod client?
    Vendor accounts are already in the dev client, created mannually, any one please guide me how  to transfer these vendor accounts in the prod server, without the USE OF LSMW.
    Please Reply ASAP
    Thanks
    M

    Hi
    Your understanding is correct.
    Development -
    > Quality
    Move TRs from Development to Quality till the time it is working as expected by business / comitted to business....
    Development -
    > Production
    Once the results in Quality (post UAT) are satisfactory, move the TRs from development to Production....
    Good Luck !!!!
    Kumarpal Jain.

  • Very urgent: Travel Request Error in production server

    Hi All,
    While creating Travel request in production server, we are getting an error..
    Error while writing to the database PTRV_HEAD/PTRV_PERIO/Cluster TE
    Someone please help me on this. This is very urgent..
    Thanks in advance!

    Solved..by setting up trip number ranges..
    Thanks!

  • 2.DMS uploading from Development server to Production server[GO LIVE]

    Hi All
    Is it all document type [dms] which r created in development server, these will transefer from development to production server by [uploading]transport request.
    Or is It needs Basiss Help.
    Rgds
    Ben.

    hi,
    I think for moving customization request to production, u dont need help of basis, if u have authorization then u can transport the request.
    Before moving first identify which are the request number u want to transport and release them using t code SE10 in development server.
    Go to production server, execute STMS t code for importing the request from devp server.
    Once ur request moved to production successfully then all customization will be available in production system except number ranges and class and characterstics.
    If ur using classification system, then create class and characterstics in production system it self.
    award points if useful
    regards
    Sham

  • DMS uploading from Development server to Production server[GO LIVE].

    Hi, All,
    I have configured DMS at client palce. Here they don't have quality server.
    What we configured will be tested in development it self. So in the unit test there is no errors at all and
    uploaded some documents in the development also.
    So i want to know how i could tranfer request and full DMS configuration to production server[Go Live].
    1.Wheather I could need Basiss Help.
    2.What are all precautions i could take before and after 'go live'
    3.What are all requirement needs to 'go live'.
    plz give procedure i details
    Rgds
    Ben

    hi,
    there no mandatory of quality server to test , if ur confident, u can directly transport to production
    For request transporattion its better to have basis person, if u know the procedure, u can also import from production server.
    Before that release all transport request in devp server.
    After transporting to prod server check wheather all customising setting imported or not, wherever necessary u create master data in production system it self(Class and characterstics, and number ranges).
    For going live u need to create all roles and autorization and need to assign to respective user ids.
    award points if useful
    regards
    sham

  • Maintain number range interval 01 for posting change notices

    Hi,
    I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
    WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
    Thanks & Regards
    Atharva

    Maintain number range for posting change in tcode  OMLW

  • Transporting object from development to production server

    Hi Everyone,
    Could you plz tell me how can i transport a object from development server to production serevr if that object is local in production server. And also could u tell me if the transfer structure is replaced if the names are different in both the server???

    Could you plz tell me how can i transport a object from development server to production serevr if that object is local in production server.
    Case 1: Object is in Prod, but not in Dev. and you want to align the systems through transports.
    You will have to send it to D (which could be done by changing transport routes & then following normal transport procedure) & then will have to bring it back with overwrite originals.
    Case 2: Object is present both in Prod & Dev. 
    You can send the transports D->P with Overwrite originals (following the transport procedures).
    And also could u tell me if the transfer structure is replaced if the names are different in both the server???
    If technical names are different in both the servers, the transfer structure will not be overwritten.

Maybe you are looking for

  • How can i transfer music from my Ipod nano to my new hard drive

    Hi, I have a I pod Nano 6th edition.I downloaded music from my CD collection and I purchased a few CD's from ITunes. I had problems with the hard drive and had to have a new hard drive installed. I was advised to save my ITunes library and my photos

  • Application Manager "download error" even after using Cleaner Tool

    I have Creative Cloud working on my primary computer and am trying to get it going on my laptop, a MacBook Pro on which I just installed Mountain Lion OSx. I have not been able to install the Adobe Application Manager to start some software downloads

  • Compression to .DV? is it possible?

    Hey ya!!! I have read the compression threads and wasn't able to find this in the manual... ok.. what i normaly do in Imovie is share my project as a .DV and then go into squeeze and compress it!!! Now in my final cut pro when i click on EXPORT using

  • Printing a credit memo

    i have been triyng to print credi momo using the current output used for printing tax invoices, but i have failed to print,i assume the settings might be wrong,what output settings can i use

  • Itunes u closes after choosing course

    Hi, when I open Itunes U and choose course to view, it automatically closes without any info or error. On Imac I can watch that course without any problem. It was working in the past. Now in version 7 and previously in version 6.1 I could not make it