Transfer of requirement

Pl explain me the transfer of requirement???

Dear Shridhar Jannu,
Transfer of Requirements
By means of the transfer of requirements, the MRP department is informed about the quantities and deadlines by which incoming orders should be delivered. The system checks the availability of the goods based on the requested delivery date of the customer and creates MRP records which contain all necessary information for passing on to materials planning. The transfer of requirements ensures that the goods are available in time for the delivery. Materials planning transfers the reported requirements and creates production orders or purchase requisitions from them, for example.
The following sections on the transfer of requirements describe how to control the transfer of requirements.
The transfer of requirements is basically dependent upon the following factors:
requirements type
requirement class
check group
schedule line category
Note
The transfer of requirements is controlled globally using the requirements class which is derived from the requirements type for all sales document types. For the sales document types, fine tuning is also possible at schedule line level. This fine tuning is described in the section "Defining the procedure for each schedule line category".
Note that the requirements classes are also used in production so you should coordinate  any changes to the requirements classes with production. The requirements type and, eventually, requirements class are determined in the strategy group so all changes made there should also be coordinated with production.
Requirements transferred to planning are further processed in the module MM. You must, therefore, coordinate the transfer of requirements with the module MM.
Requirements
For controlling transfer of requirements, you have to carry out the following steps:
1. Each requirement type has to be allocated to one requirement class only.
2. The transfer of requirements must be switched on at requirements class level, the sales documents at schedule line level.
3. You must define a check group. It is possible to have this check group proposed for the initial creation of a material master record.
4. Note that a plant must exist for transfer of requirements to be carried out at document item level.
Note
Requirements transferred to planning are further processed in the module MM. You must, therefore, coordinate the transfer of requirements with the module MM.
Reward if usefull
Regards,
Srikanthraj

Similar Messages

  • Period shift in Transfer of Requirements

    Dear SAP experts,
    I'm looking at the following challenge. I have a situation where there a number of Materials linked to the same Planning Material. I'm using Planning Strategy 60 (on both the Planning Material and the real Material).
    The production process has for most Finished Goods only one main production step. For a numer of Finished Goods there are also one or two post processing steps required.
    With only Main production step> When the customer orders for wk X the main production has to take place in wk X-1
    With post processing               > When the customer orders for wk X the main production has to take place in wk X-2
    I have created Planned Independent Requirements (PIRs) for the planning material (requirements type VSEV) representing the (sort of repetitive) production cycle of the planning material. So for example production in week X, X4, X8 etc.
    The first challenge I had was the ATP check (not via ATP logic, but against planning). For materials that require post processing I should not do an ATP check on wk X-1 but on wk X-2.  With help of this forum I found the user exits where I could change the Material Availabilty Date for the Materials with post processing before the ATP check etc. etc. So the ATP challenge is solved.
    However, when the ATP check is succesful the quantity gets confirmed, but the actual Material Availabilty Date is wk X-1. Based on this the transfer of requirements takes place. Now it could happen that the wrong PIR get's consumed or even worse I cannot save the order, because of availability issues.
    I realize I can solve this problem by splitting the Planning Material in two. However this would seriously increase the number of Planning Materials which would make the solution not practical anymore.
    Is there anyone out there who can give me a hint on how to proceed?
    Kind regards,
    Mark

    Dear Kumar,
    In my understanding Planning table is used for capacity check and capacity levelling and to modify the existing requirements.
    Planning Table and Capacity Planning
    You can also use the planning table with capacity planning. Here, planning is based on lead time scheduling. The basis for lead
    time scheduling is the routing. You can access the capacity planning table directly from the REM planning table. The capacity
    planning table provides you with support in dispatching and reallocating production quantities.
    Check this link,
    http://help.sap.com/saphelperp60_sp/helpdata/en/5f/1faba54aee11d189740000e8322d00/frameset.htm_
    Check and revert back.
    Regards
    Mangalraj.S

  • Transfer of Requirements for Return Orders

    Hi,
    Please I need  help on TOR management with Return Orders in SD.
    I've already red  all the threads realted to TOR and ATP but I couldn't find a solution. As we know TOR is dependent on the following data: reqts type, reqts class, checking group and schedule line category.
    The reqts type and class are determined in the strategy group (material master - MRP3).
    Now if I switch on Transfer of Requirements for Returns, at Schedule Line level and Reqts Class level, the result is that I can see requirements related to Returns in the availability check overview of Sales Orders (ATP count) but if I check in the requirements list (i.e. transaction MD04) these requirements related to Returns are not recorded. Why?
    And also another point please: requirements generated from Return Orders, into ATP count are considered as normal Sales Orders (negative sign, reducing ATP quantity, when it should be the contrary because a goods receipt is expected).
    Can you help me please on these 2 points (perhaps something related with Sales Document Category)?
    Thank you very much
    Kind Regards
    AP

    I practically did a sample order / returns order to see your requirements and these are my observations
    a)
    If you create a standard sales order, then the availability check registers a minus sign with stock required in Rec./reqd qty field.
    Once you save the sales order, this is not seen again as the total quantity is reduced by sales order quantity.
    It was indicating a minus sign when you created a returns order because you checked the Transfer of requirements and availability check indicators in schedule line category.
    It was simulating a requirement as you checked the indicators in schedule line category.
    If you create returns order with standard DN (i.e. Transfer of requirements and availability check indicators are not checked), then you would not see any requirement for stock i.e. you don't see any new entry in availability overview screen.
    b)
    You are not seeing returned quantities in MD04 because of Movement types. This has nothing to do with Transfer of requirements.
    Schedule line DN uses movement type 651.
    Using movement type 651, you post returns from a customer with returns delivery to blocked stock returns.
    The blocked stock returns are are neither valuated nor part of "unrestricted-use" stock.
    Hence you are not seeing the returned stock in your available stock.
    If you click the magnifying glass on total stock i.e. top line of your stock/requirements list (transaction MD04), you could see the returned quantity in 'Returns field'.
    If you want to post returns from a customer with returns delivery directly to the valuated stock, you could use the following movement types in schedule line category.
    653 Returns from customer to unrestricted-use stock
    655 Returns from customer to stock in quality inspection
    With these movement types, you could see returned quantities in stock/requirements list.

  • Transfer of requirements

    dear gurus,
                   can any body explain the transfer of requirements from salesorder to production..ie integration of sd and pp.
    in sales orders what are all the pp parameters ?
                      -guna

    Hi Guna,
                       It is through the strategy group that is defined in the MRP 3 view that controls the integration b/w the two:
    If for eg we take the strategy 20 that is classical make to order than  product is produced specifically for an individual sales order.This planning strategy is used when planning of the (parent) product is not required or not possible.Each product is specifically produced for an individual customer so that the finished product is rarely placed in stock.Similarly other strategy can be there for example strategy 82 when a sales order is created for the material, a production order is created automatically in the background. And as follows the other given by Mr.Bala.
    With Regards
    Tarun

  • What will happen if we did not maintain in transfer of requirement

    hi'
    gurus in transfer of requirement if we did not maintained.  availability check like daily requirement or collective require what system will not do
    thanks in advance

    hi,
    the availability check field  is used to specify whether indivual or collective requirments has to be created for the sales orders and shipping process .
    it is one of the key factor for availability check for the sales orders ,if that is not maintained then availability check at the sales order level does not take place,
    the schedule lines are not confirmed.
    hope  it helps
    reward points
    sriram.

  • Transfer of Requirement & Availability Check

    Dear All,
    In simple words can anybody tell me the concept of Transfer of Requirement & Availability Check..
    I am not looking for Configuration details but want to know the basic things like......
    What is Transfer of Requirement & Availability Check?
    Where we are using ?
    How it help us ?
    etc...........
    Points will definately awarded.
    Regards
    SAGAR

    Dear Sagar
    1)  Transfer of Requirements
    Transfer of Requirements determine whether and how requirements should be transferred and if they should be checked against planned requirements. The transfer of requirements in sales can be switched on or off by transaction as required. For example, you can switch off the transfer of requirements for inquiries and quotations, whereas you can switch it on for sales orders and deliveries.
    2)  Availability Check
    There are three types of availability check:
       --> Check on the basis of the ATP quantities
       --> Check against product allocation
       --> Check against planning
    In Customizing, you determine whether an availability check is to be carried out against the ATP quanitity or against planning. The check against product allocations is controlled in the material master and elsewhere in the system.
    a) Check on the Basis of the ATP Quantities
    The ATP quantity (ATP = Available To Promise) is calculated from the warehouse stock, the planned inward movements of stock (production orders, purchase orders, planned orders) and the planned outward movements of stock (sales orders, deliveries, reservations). This type of check is performed dynamically for each transaction, taking into account the relevant stock and planned goods movements with or without replenishment lead time. Planned independent requirements are not taken into account here.
    b) Check against Product Allocation
    Product allocation facilitates period-based distribution of products for certain customers or regions. As of Release 3.0F, you can carry out an availability check against product allocation. This ensures, for example, that when production is low, the first customer does not get the full amount, resulting in following sales orders not being confirmed or being confirmed far too late.
    c) Check against planning
    The check against planning is performed against independent requirements which are usually created for an ‘anonymous’ market rather than being customer-specific (for example, in the strategy ‘Planning without assembly’, when production occurs only up to the stocking level). The planned independent requirements result from demand program planning and are used for planning expected sales quantities independent of orders
    thanks
    G. Lakshmipathi

  • How to transfer the requirement from one plant  to many plants(STO)

    hai gurus,
    My scenario is as follows:
    1) Plant "A" is Receiving plant.
    2) Plant "B" ,Plant "C", Plant "D" is three production plant.
    3) All the above 4 plant under same company code 1000.
    4) Now plant "A" gets the requirements and pass on to all the three production plants, which
    is based on forecast.
    5) How the requirement to be passed on from plant "A" to all the three production plants namely B/C/D
    under sap
    6) After production of fert under 3 production plants the final products is transferred to the plant "A"
    ware houses which is situated near by plants of B/C/D.
    7) Only one fert material( Fert 1) is common for all three plants produced based on the capacity at all three plants.
    8) Remaining fert material is plant specific, that is for Example Fert 2,3,4 produced only in plant" B"
    Fert 5,6,7 produced in plant "C" and Fert 8,9,10 produced only in plant "D".
    How to map into sap
    waiting for the positive reply
    Regards,
    sekar chand

    Hi again,
    For more details on stock transfer from alternative plant in MRP, see also the attached link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2d5a44af11d182b40000e829fbfe/content.htm
    Regarding FERT1, you can place sales order, but it will not trigger requirements in the manufacturing plant. Also, because all plants are in the same CC it is not a good idea.
    If you are willing to do some manual/external work in determining how much of FERT1 will each manufacturing plant produce, then you can just manually create STOs accordingly. These STOs will generate MRP requirements in the manufacturing plants.
    Regards,
    Mario

  • Transfer order requirement

    hi every one,
    my requirement is
    If the transfer order is confirmed - i.e. VBUK-LVSTK (Overall WM status) is C,
         HU determination should be done using FM - HU_GET_HUS by passing delivery number in IS_OBJECTS.   
         HU can be picked from table ET_HEADER. Material and quantity from ET_ITEMS
    i.e if tranfer order is confirmed source storage unit are cuurently any moreAfter repacking in VL02N the displayed HUs are not currently anymore.
    WM-TR is not yet confirmed, in this case the determination could stay unchanged
    can any one help me to write code...
    thanks in advance.
    Moderator message: "spec dumping", please work yourself first on your requirement.
    Edited by: Thomas Zloch on Jan 25, 2012

    Maxx,
    I am not sure why this question has resurfaced again. I thought you had figured this yourself below.
    Combining Transfer requirements into a Single transfer order
    If you have something to add, please do so. I would be interested to know.
    H Narayan

  • Transfer of requirement from LTP to operative planning

    Hi,
    I have run LTP for different 5 finished products by MS01 by creating one planning scenario.
    After LTP run system has planned all the raw materials required for all five finished materials.
    Now I want to transfer the planned orders for all raw materials to operative planning MD04. But I dont want to transfer the planned orders for the finised materials to MD04.
    Through MD43 I can copy planned orders of raw materials to MD04 one by one (material wise).
    Is there any way that I can transfer planned orders of all the raw materials to MD04 at once.
    Please guide........
    Nitin

    Dear Nitin,
    I dont think a direct solution is possible ,either you can copy the values from one version to another using T
    code MS64.The source version will be the inactive version and the target version will be 00.
    One more T code MS66 for copying Simulative Dependent Requirements.
    Regards
    Mangalraj.S

  • Transfer posting required text

    Dear All,
    Please help me on how to config. required field text in transfer postiong using transaction code MB1C with movement type Z14 and Z13 .
    MB1C with movement type Z14 and Z13 we use this as conversion of regular stock to special stock(on Pack item)
    Thanks a lot,
    Ermin D. concepcion

    hi,
    Check the OMBW transaction for your Mvt types...you can see line item text under general data...
    Hope it helps..
    Regards
    Priyanka.P

  • Credit block orders transfer of requirements to SNP

    Hi Gurus,
    I work on the Demand Planning stream, but i would like to know if APO SNP Heuristic would behave the same as R/3 regarding Credit Blocked orders.
    in R/3 due to Requirement 101 in OVB8, the credit blocked sales orders do not get confirmed, yet they still send the requirements to MRP MD04.
    what is the logic in SNP or PPDS for this, does a special requirement type gets generated in SNP, even though the Sales Order is not confirmed and not showing in APO DP?
    feedback appreciated
    regards
    JD Loera

    Jeevi,
    I will never recommend what Siva has mentioned. What it means is that
    1. The "Item" - Component will no longer be copied when a Production/Process/Planned order is created.
    2. System does not create any reservation for that material.
    3. If you need to Issue that material to an order, it will be "unplanned" Issue.
    Hope you understood the problems associated with this.....I would suggest to go with Planning strategy "11". If it is external Procurement look at different MRP type.
    Reward your points is these were helpful to you,
    Regards,
    Prasobh

  • Control of Transfer Of  Requirement  creation Screen   T code OVZG

    Hi All,
    I am trying to create a new Requirement Class in T code OVZG but in the details screen i am not able to change some fields like,Special Stock,w/o val start,strategy seq,costing.........etc, All in display mode how to make it in change mode.....
    Regards,
    Balarengan

    Hi Balarengan
    There will be a loft of fields in REQUIREMENT CLASS which will be greyed out
    That means the values for these fields are flowing from somewhere else
    Say for example Special stock (this will be greyed out)
    This flows from item category in VOV7
    If you take the REQUIREMENT CLASS delivery requirement 011 then the special stock indicator will be blank in greyed out
    If you take the REQUIREMENT CLASS make to order cons stock type 042 then the special stock indicator will be E in greyed out
    Like that some controls cant be directly given flows from somewhere else
    Check in PP forum for more inputs
    It is certainly not related to authorizations
    Special stock comes from SD side and like that from other modules as well said by Mr.Sadanandam
    Regards
    Raja

  • Transfer of requirements from sales order to production.

    hi 
    how are the requirements transfered from sales order to MRP.
    if a sales order is created how is the reqirement getting tranfered to MD04.
    is it through requirement class and requirement type.

    Hi Friend,
    Basically the requirements are transfered based on the requirement types
    Priority 1: Strategy group...Every strategy group is assigned with reqt type...depending on the strategy selected the assigned Requirement type is triggered and it will behave as per the configuration.
    if Strategy group is not mentioned in material master then it will pick the requirement type which is assigned to Item Category group in sales Org 2 of material master.
    if Item category group is not mentioned then it will look for MRP group.
    Thanks
    Satya

  • Transfer Routine required

    Hi,
    I am getting the Alpha Numeric (for example:150DD say)data for the field 0SALESEMPLY into the infosource 2LIS_11_VAHDR, but the data type for 0salesemply is NUMC in the info source.
    Because of this data type(NUMC) the data for this filed is loading only the numeric value i.e.,150 only, but not as 150DD into the infocube.
    In order to load load as alpha numeric value, i think i need to write Transfer Routine for the 0SALESEMPLY info object in the Transfer rules (in 2LIS_11_VAHDR), there by it can load alpha numeric values for this info object.
    So please provide me the <b>Routine</b> which can transfer the alpha numeric data for the existing Data type(NUMC) for the info oblect in the infosource 2LIS_11_VAHDR.
    Thanks & Regards,
    Kishore

    Hi Anil,
    <b>I am loading the data from a Flat file where the data</b> , that contributes to the info object 0SALESEMPLY in the the info source 2lis_11_vahdr, <b>in the flat file for the respective field is Alpha Numeric values.</b>
    But we have the 0SALESEMPLY (BW) info object with data type Numc which accepts only numeric values.
    so it is loading only the numeric values(ex: 150 say) of that field but not the entire alpha numeric value(ex: 150AR, say).
    so in this situation how can i proceed.
    Please respond asap......
    Regards,
    Kishore

  • During initial setup of mac pro, used pc to mac transfer, after transfer mac requires new password to enter account but will not accpt password

    During the initial setup of mac book pro, I did the pc to mac transfer. After transfer was complete, mac had two user accounts aspen pc machine? and dell. Upon trying to access either, the mac says I have to enter new password to enter. It will not accept new password. What do I do?

    Well....I bit the bullet and called Apple tech support this morning and agreed to pay my $49 for the tech support. I ended up talking to a Boot Camp specialist. In the end his position was that "they didn't support Windows" and my particular problem was a "Windows problem". I countered with the fact that they advertise that one of their selling points was that Windows could run on an Intel Mac and that I ought to at least be able to install Windows. They said that most people were able to install Windows with no problems. I agreed, but told them that, after searching the Internet, I had read numerous posts from folks that had the same problem and that Apple really should address it. They were very polite and even agreed not to charge me the $49, but their final position was that it was a "Windows problem."
    I guess that at this point I'll try to return the Windows disk to Amazon and see if they'll give me a replacement.

Maybe you are looking for