Transfer of schematic to ultiboard failed

Hi,
I tried to transfer a Multisim schematic to Ultiboard and it failed. As usual during transfer, Ultiboard showed the import Netlist Action window. I closed the window by pressing OK, but Ultiboard did not create a new board outline and also the parts that should have been imported didn't appear. The Spreadsheet View stays empty as if nothing was imported at all. This problem only occurs with one of my projects, others are transferred without any problems. Since Ultiboard did not create any ErrorLog, I can't trace the cause of this problem. Does anyone have any idea of how to solve this problem?
b.t.w.: I'm running Multisim/Ultiboard 10.0.343 on Windows XP.
Thanks in advance,
Robert

I was unable to re-create this situation. When I tried to transfer from Multisim to Ultiboard it went off without a hitch. Could you tell us which version you have? Maybe you could post your file for us to examine as it may be another problem other than the component. Is this a component you either edited or created? I ask this because you mention trying to delete it from the user database.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Similar Messages

Email transfer between two specific users fails

The email transfer two particular user fails. O(ne is assigned to POP3 and the other one to IMAP

So from your point of view:
You get email from sender.
you open it to read.
you click on 'Reply'
Are the FROM and TO email addresses auto entered correctly?
you complete the email and click on 'Send' button.
A copy is placed in your 'Sent folder - confirm ?
you do not receive any message saying undelivered etc.
Do you have this issue with ant other email you send or is it only to that person ?
Do you get the same issue if you use 'Write' not 'Reply' and create a new message to the recipient?

Transfer data to sd card fails to start

Hi all,
In the storage section of settings on my Xperia Z2 there is a "transfer Data to sd card" option. it use to work just fine. Once the internal storage was awfully full and came a notification that said "75% full, transfer data to sd card" tried it like always but this time it fails to start. When I try to run it from inside the settings, also fails to start.
Any suggestions are appreciated.
Thanks
Solved!
Go to Solution.

Use the file commander app > cut > paste > on the SD card.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Transfer of WriteNow 4.0 failed

I want to use WriteNow 4.0 in Classic Mode on my iMac G5 running OS 10.4.2 (with OS 9.2.2 transferred over from my G4 laptop). I have a bootable copy of WriteNow on a USB disk, which I've tested on my G4 Mac in OS 9.2. When I mount the USB disk on the iMac, that file shows "0 KB" and Info says "Unix Executable file, Zero kB". When I try to open that file I get a blank Simple Text document. My question is: Is it possible to use WriteNow 4.0 on my iMac (presumably in Classic mode), and if so, how do I get it in there?
iMac Mac OS X (10.4.2)
iMac Mac OS X (10.4.2)

A workaround was to e-mail myself the WriteNow program (only ~400 kb) as an attachment. The program seems to work OK running in Classic mode.
(I don't know why the USB disk couldn't make the transfer, but this sort of also thing happened when I tryed to import last year's tax return into Turbotax. The advice I got from the folks at Intuit also worked for this problem--after I remembered it!)
JB

Error 779 shows up in ip phone when transfer to a hunt group failed.

We have a CME (C2800NM-SPSERVICESK9-M), Version 12.4(24)T3. We have receptionist IP phone and a group of xx team phone setup. There is a hunt group for that group of xx team phones.
The receptionist phone is setup like this:
ephone-dn 102 dual-line
number 279          <<<<DN for receptionist
label xx
description 279
name xxx
corlist incoming SUPER
huntstop channel
hold-alert 30 originator
ephone 71
mac-address xxxx
username "x279" password xxx
provision-tag 279
type 7961 addon 1 7914 2 7914
button 1:102 2m49 3m52 4m40
button 5m7 6m105 7m114 8m11
button 9m43 10m83 11m66 12m74
button 13m48 14m38 15m54 16m104
button 17m88 18m53 19m69 20m37
button 21m41 22m80 23m60 24m56
button 25m70 26m100 27m72 28m92
button 29m71 30m110 31m61
The xx team's hunt pilot is DN 201:
ephone-hunt 20 longest-idle
pilot 201
list *, *, *, *, *, *, *, *, *, *, *, *
final 775                 <<<<this is voicemail number
timeout 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15
no-reg pilot
display-logout
1. If calling the reception phone (either from PSTN, or internally in the same site from a phone regiestered to the same CME),   the receptionist can pick the phone and talk, no problem. But if the receptionist transfers the call to ext. 201 (the pilot of hunt group). Intermittently, a few times a week, the call drops after being transferred. The receptionist sees 779 on her display, the callers hears a message saying "There was a technical problem". It is not possible for the receptionist to take the call back. The client has to recall and then on the 2nd try to call is transferred OK.
If the receptionist transfer the call to the DN of individual member of the hunt group, transfer is good.
2. If caller calls the pilot direclty (either from PSTN, or from internal phone in the same CME), the caller experienced the same issue as in the transfer case.
If caller calls the number of individual memeber of the hunt group, there is no problem.

Hi Billy
This is not supported. This support is being added for next release.
Thanks

Call transfer from Lync 2010 attendant failing

Hello,
We are having an intermittent fault with a customer whereby calls into the Reception (Response Group, Attendant routing, Lync 2010 Attendant consoles) connect fine, and the first leg of the consultative transfer (to the internal extension) works fine, however
when the attendant tries to put the call through it pauses then bounces back with an option to retrieve. The call can be retrieved, she tries again and it goes through fine. Due to the high volume of calls this is becoming a massive issue which may result
in us having to remove Lync EV and install a traditional PBX, so any help would be appreciated. Here's the topology:
Lync 2013 Standard Edition
Audiocodes Mediant 1000 with SIP and ISDN30 PSTN lines
Aastra 6725ip Handsets
Lync 2010 Attendant Consoles
Here's a list of what's been tried currently (in no particular order):
Disabling media Bypass
Removing Refer to Gateway
Removing Centralized Media Processing
Upgrading Firmware of the Audiocodes
Upgrading the Aastra handset Lync PE to latest
Patching Lync 2013 Windows Client
Patching Lync 2010 Attendant Console (July 2013)
Rebuilding on Physical server as instead of Virtual
We have tried to capture the OCS Util logs from the FE but cannot see anything. In the monitoring and archiving reports I see this from the server:
52095; reason="Media session terminated on internal client error"
And this from the client:
52095; reason="Media session terminated on internal client error"; OriginalPresenceState="0"; CurrentPresenceState="0"; MeInsideUser="Yes"; ConversationInitiatedBy="0"; SourceNetwork="0"; RemotePartyCanDoIM="No"
Additional diagnostic information
Seq # Diagnostic ID Source Application Diagnostic Header
1 13004 jbl-lync13se01.JBL.local InboundRouting 13004; reason="Request was proxied to one or more registered endpoints"; source="LYNC13SE01.***.LOCAL"; Count="1"; appName="InboundRouting"
2 13005 jbl-lync13se01.JBL.local InboundRouting 13005; reason="Request was proxied to one or more additional targets"; source="LYNC13SE01.***.LOCAL"; appName="InboundRouting"
http://lync2010tips.blogspot.com - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

I didn’t quite understand your issue. Please try to elaborate a little more.
Did you see the issue with Lync full client?
Check if you can find any event in Lync Server Event Log on Lync Front End Server.
Check you have enough RAM on Lync Front End Server.
Lisa Zheng
TechNet Community Support

Can't change pin mapping of a capacitor in multisim

I have an annoying problem in that all the eletrolytic capacitor footprints in the database seem to have their pins mapped to the opposite pin in the symbol, i.e.
1              2
2              1
The problem arises when you transfer the schematic to Ultiboard and the only way I can make ultiboard connect the capacitor properly is to reverse the connections of the electrolytic capacitor in multisim, i.e.
+             GND
-              Vcc
And there seems to be no way of changing the pin mapping in multisim. You can go to 'edit footprint' and go throug the motions of changing the pin mapping. But as soon as you close the dialog box and then go back into to 'edit footprint' the previous reveresed pin mapping is back.
How do you fix this extremely irritating problem?

Hi,
This reply is almost the same as the one on this item:
http://forums.ni.com/t5/Circuit-Design-Suite/Update-footprint-of-already-placed-components/td-p/3145...
Normally you can not edit the master database...
You can open the part in the master database, and save it to your user database,
YOU MUST USE THE SAME FOOTPRINT NAME.
In you user database you can now change the footprint pin names (properties)
save it after you're done and keep the same footprint name
next do a footprint update: Tools/Update shapes
when Ultiboard updates its shapes , it looks in the User database first, and afterwards in the master database.
So if you kept the same name, your shape will be updated to the one you changed.
Now your polarity should be OK
succes!

Transfer a Transferred Call failed

I have issue with Lync, transfer a transferred call always failed, the scenario as following:
User A calls User B (Success)
User B transfer to User C (Success)
User C transfer to User D (Failed)
This issue happens always for all the users whether the call is Lync-to-Lync or PSTN-to-Lync call.
Any help is appreciated

Hi,
Did all user in one site or in different sites? Since when calls are transferred or forwarded, the routing of calls is affected by Location-Based Routing.
You can refer to the link below of “Deployment Process for Location-Based Routing”:
http://technet.microsoft.com/en-us/library/jj994055.aspx
Please also try to disable REFER support. From the Control Panel -> Voice Routing -> Trunk Configuration, open your trunk for the gateway (if you don't have one, open the Global one) and change REFER support to None.
Click OK. Click Commit and commit the changes.
Wait a few minutes and try again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Exporting schematic from Multisim to Cadence Allegro

Greetings,
My company owns a copy of Allegro and Multisim. I'm having a bit of a hard time convincing the powers-that-be that we need another SPICE/schematic capture and/or PCB layout program.
Does anyone have a method for getting schematics, hopefully with footprint and pinout information, from Multisim to Allegro? I've been searching the net for a while now off and on, and I'm coming up empty on this. The best I can come up with is a straight netlist export/import, but then I have the issue of updating part libraries in both programs. So, I thought I'd throw the question to this forum and see if anyone else has dealt with the same or similar issues and has either a solution or a "can't be done in a reasonable amount of time" conclusion they'd like to share. (I mean, I'm pretty sure I could WRITE a program to convert between the two, but it would take half a year or more at my next-to-nil level of expertise in the file formats of each program. Way before that point, Orcad or Ultiboard would be cheaper).
Thanks for your time,
Mike

Hi,
When you transfer a Multi-page design from Multisim to Ultiboard, all the parts are transferred at the same time and placed outside of the board outline and there is no way to automatically group parts that come from a specific page.
Now, one thing you could do is create a Part group in Multisim. Open a page and select all the component, then go to the Spreadsheet View, Components tab. Go to the Part group column, click one of the cells and enter a name for the group. Repeat for other pages if necessary.
Transfer the design to Ultiboard. Now, let's say that you want to place on the board outline only the parts from a specific page. In the Spreadsheet View go to the Parts tab. In the Part group column select the entire group; only the components that belong to this group will be highlighted. Now you can simple drag and drop the entire group of components.
Hope this helps.
Fernando D.
National Instruments

Exporting components from multisim to ultiboard

I would like to export my design from multisim to ultiboard. I have multiple pages in my schematic in multisim and I when I export it to ultiboard, I would like the components in a page to be placed near each other in ultiboard. What should I do ?
Solved!
Go to Solution.

Hi,
When you transfer a Multi-page design from Multisim to Ultiboard, all the parts are transferred at the same time and placed outside of the board outline and there is no way to automatically group parts that come from a specific page.
Now, one thing you could do is create a Part group in Multisim. Open a page and select all the component, then go to the Spreadsheet View, Components tab. Go to the Part group column, click one of the cells and enter a name for the group. Repeat for other pages if necessary.
Transfer the design to Ultiboard. Now, let's say that you want to place on the board outline only the parts from a specific page. In the Spreadsheet View go to the Parts tab. In the Part group column select the entire group; only the components that belong to this group will be highlighted. Now you can simple drag and drop the entire group of components.
Hope this helps.
Fernando D.
National Instruments

My music won't transfer on my brand new nokia c6-0...

Hi everybody, I bought my phone in the last couple of days.Everything work perfectly on the phone . I tried to transfer some photos and it works. I tried to transfer some music in playlist and it says in french (because I'm from Canada Qubec city) : Échec du transfer de données ..Fail to transfer data.. I don't know exactly because now I'm not at home , I am working right now and I can't check it on this pc. What problem it can be ? Please Awnser me soon .
Olivier from Canada.

What does " downloaded onto my new MacBook Pro through iCloud on my iPhoneB" mean?
Copy everything from your old computer, or your backup copy of your old computer, to your new one.

Can I recover deleted photos from my iPhone 4S? I failed to press import on my mac before deleting from phone. Now they are lost!

I am new to owning a Mac. When I plugged in my iphone to transfer over my photos I failed to press the import button (didnt clue in I had to do this because I saw all the photos on the screen). In the mean time my husband deleted all the photos from the phone. Now we have lost them on the phone and after the fact I could not import them anymore. Can I recover the deleted photos and videos from my phone? Please Help!! There seem to be software to purchase to do this but does it work and which one should I use? Thanks!!!

Restore from backup http://support.apple.com/kb/HT1766

The Response Group application was unable to transfer the call to the configured destination and no fallback exists

Hey,
I get this error message when calling into an unassigned number which redirects to a response group:
From user URI:
sip:[email protected];gruu;opaque=srvr:Microsoft.Rtc.Applications.Acd:RS6nRGV9DlmpNsLtmz5qeQAA
To user URI:
0220198611;phone-context=DefaultProfile
From user agent:
RTCC/4.0.0.0 Response_Group_Service Announcement_Service
Diagnostic header:
26005; reason="The Response Group application was unable to transfer the call to the configured destination and no fallback exists."
Interestingly "To user URI: 0220198611;phone-context=DefaultProfile" is the number off the caller not the destination. I wonder is this a bug? So is the response group trying to transfer to this number and failing because of course it doesnt exist?
As you can see the below the number I am calling is not 0220198611:
From phone number: 0220198611;phone-context=DefaultProfile
To phone number: +6493760053 From mediation server: onzlyncfe1.domain.co.nz To mediation server: From gateway: 192.168.100.70
To gateway:
Disconnected by: +6493760053
Does the calling party's number have to be normalised? If so how can I do this because the global normailisation rules dont seem to apply
in this situation. These rules do work when when calling into a users DDI.
Also to be clear....
+6493760053 is an unassigned number which is setup to redirect to a response group.
If I assign +6493760053 to a user then it works.
Additionally this works perfectly when the gateway sends the call to our legacy 2007r2 mediation server then on to Lync. If the gateway sends the call directly to the co-located Lync mediation server I get the error described.
I hope I make sense. If you are confused let me know :)
Help is appreciated.
Thanks,
Andrew

Hi ANdrew
Kindly advise how you transfered the unassigned numbers to a specific user, i used the below command but it failled, the message displayed but the call never routed:
New-CsAnnouncement -Parent service:ApplicationServer:LyncFE.squareone.local -Name "SQ unassigned number announcement" -TextToSpeechPrompt "You entered an invalid extinsion you will be forwarded to the operator" -Language "en-US" -TargetUri "sip:[email protected];user=phone"
While [email protected] is the sip uri in my lync for the operator
could you advise what is my issue?

Stock transfer using movtyp 541 an 542

Hi,
Stock is to be transfered from one storage to vendor using movtype 541 and 542. After using 541 stock is kept in transit using 541 and normally the system should
generate automatically a Movement Type 542 to move the
stock to vendor. .. But transfer of stock using 542 failed and stock is presenrly in transit.
So please tell me how to transfer this stock in transit to the vendor .
PLease help
Points will be rewarded
Thanks
Rohit

Hi Rohit,
You are talking about Subcontractiong process,
In Subcontracting first you create a Sub contracting PO with item L, then you do transfer Posting of your stock to vendor using 541Mvt for this PO, and once this subcontracting material is recieved through Mvt Type 101 there is an automatic consumption Mvt type 543 which will happen indicating the consumption of the subcontracting material.
there is no concept of stock in transit in Subcontracting.
542 Mvt is used as a reversal of 541 which will bring back the stock from vendor to your own stock.
Regards,
Vijay

Best practise to transfer and manage music to my L...

Hi,
First of all I'm not new to Nokia, I've managed my Nokia N8 through Windows Media Player and it was rock steady.
Now I've got the Lumia 920 and I've used Winamp, Windows Media Player and recently I've tried the official "Nokia Music Player".
Winamp:
- Sometimes when I transfer playlists or songs, it fails transferring it. Probably due to that Winamp plays everything (downloaded) and even with bad tags.
- You don't know how the music will be displayed on your device, like album artist or album and album artwork doesn't always comes through.
- If something fails and you transfer it again, you get doubled songs.
+ Great UI, quick and if it works it's baddass
Windows Media Player:
- Don't like the media library and changing details it's a hassle.
- Album artwork doesn't always comes through.
+ Very robust syncing! Even with playlists
Nokia Music Player:
- Doesn't show some mp3 files, which are playable in WMP, Winamp and even on the phone! You need to import these files separately, but after a refresh these are gone.
- Focks up your created playlists in WMP or Winamp.
- Does strange stuff, like copies track (which are transferred) back to your PC in his own directory structure
+ Shows the best what's actually on your phone
+ Gives an actual presentation how it will be presented on your phone. E.g. if some details(album art) aren't right in the library then they also won't be right on your phone.
So like above, no product is perfect. I haven't tested Zune or Itunes, so hopefully other users could post their experience.
I guess there are more posts like this one, but the problem with searching like "nokia music player" you get results which aren't related to transfer and managing music.

Connect the phone to the PC. Open the folder you want to copy using windows explorer. Copy music files. Right click & select send to Windows Phone. For help regarding Playlists go to the link below:
Playlist WP8
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Transfer of schematic to ultiboard failed

Similar Messages

Maybe you are looking for