Transfer of stock between the storage types in WM

Hi Gurus,
can any one tell me the proceedure how to transfer a material in warehouse between the storage types.
For example if i have a stock of 100 Nos.ina warehouse of storage type 916 (Goods issue for Deliveries) Ineed to transfer this stock to my permanent bin Storage type of 001.
Sunil

Hi
Use LT01 & create Tansfer order (TO), Input material ,plant,storage location.
Provide the required inputs like Source & destination storage type,storage section & Bin numbers.
Finally confirm the TO, it will be done.
Regards,
Ravindran

Similar Messages

Transfer of stock between two storage locations within a plant in two steps

Hi,
We have a plant 6400 & we have two storage locations 6401 & 6402. Each storage location belongs to a department which are located at some distance from one another.
The material to be moved from one storage location to another using a truck.
For the above mentioned process can we have the following process
(1) In first posting the material is issue from the storage location to a transit
(2) In second posting the material from the transit is received into the storage location
I am looking for a feature that is possible between two plants, can we have a similar feature available within a plant.
Warm regards,
Umesh

Hi Umesh,
It would be a business decision i suppose. If those 5 nos. are lost / damaged in transit & needs to be scrapped, then the ownership needs to be decided first. If it lies with the sender, then reverse the 5 nos. (MB1B mvt is 314) & then proceed with your scrapping or if it lies with the receiver then receive the 5 nos & then proceed with the scrapping.
Posting in system is one aspect, but a clear business rule is the key factor. So discuss with your materials mgmt personnel to define the process flow.
Hope the above helps.
Regards,
Vivek

Process efficiency: transfer of stock between 2 sites

I'm looking for some input/experience concerning the comparison of user workload "in minutes" for WM Transfer of Stock between (2 storage types) (process in 2 steps: step1: transfer "issue"- Step2: validation of transfer) and Shipping between 2 SAP plants in the same company code based on MM SA - SD SA + Goods receipt.
Thanks

Hi Umesh,
It would be a business decision i suppose. If those 5 nos. are lost / damaged in transit & needs to be scrapped, then the ownership needs to be decided first. If it lies with the sender, then reverse the 5 nos. (MB1B mvt is 314) & then proceed with your scrapping or if it lies with the receiver then receive the 5 nos & then proceed with the scrapping.
Posting in system is one aspect, but a clear business rule is the key factor. So discuss with your materials mgmt personnel to define the process flow.
Hope the above helps.
Regards,
Vivek

Transfer project/ SO stock between 2 storage locations of same plant

HI,
We have a requirement in which the we have to transfer project/sales order stock between 2 storage locations of the same plant.

Transfer between storage location.
   311 Q - Project Stock
   311 E - Sales Order Stock
Transfer between storage location to own stock
   411 Q - Project stock to own
   411 E - Sales Order to own

Error during Stock movement between two storage type

Dear Friends
How do i move the stock from one storage type to other storage type within a warehouse?
In the material master i have maintained a storage type indicator for automatic storage type determination.
now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
Error occurred during storage section search (1740 003)
Message no. L3041
Diagnosis
No storage area search has been defined for this material and this storage type.
Please assist
Thanks

Dear,
Kindly specify the storage section indicator in Material Master - WM view.
Regards,
Sandip

STO settings between the storage location

Hello,
I am trying to set up the STO between the storage location can anyone please tell me the detailed configuration steps. I have created the STO but in hte delivery the document is not displayed. please help me out here

Hi
SAP offers a STO process between storage loactions and this is not active in Standard SAP. You need to activate it and further deactivation can cause some discrepencies.
Follow the steps
1. SPRO > MM > Purchasing > Purchase order > Set up stock transfer between storage locations.
2. Activate stock trasfers between storage locations -> this will enable maintaining issuing storage location in thhe line item of the PO
3. If delivery based GI is required then
3. You need to set up delivery type, checking rule for a purchase order document type and issuing storage location
4. Define shipping data for the storage locations
This should help you with the process
with regards

Auto Confirmation of transfer order - 999 mvt from storage type W01 to S01

Hi,
I am trying to automate the confirmation of transfer orders between storage type W01 and S01 using a 999 movement type. The 999 movement type appears to work perfectly when doing a bin to bin movement within the W01 storage type (for example move batch abc from bin 01 to bin 02) no confirmations are required. However if I transfer from a bin in W01 storage type to the S01 storage type (which only has a single bin to represent a staging area) a manual confirmation of the transfer order is required via lt24 or lt12. It appears therefore that the issue is with the storage type S01 for this particular Warehouse. The setting to confirm the TO immediately is already activated for movt 999 in customizing, is there a setting for the storage type that must be defined.
Regards,

F1 help for field V_T333-SQUIT:
Means that the transfer order item can be confirmed immediately during the creation procedure.
SAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
To set the confirmation requirement for foreground processing, select the indicator for TO item can be confirmed immediately.
As per my understanding the immediate confirmation indicator does not mean that the transfer order will be confirmed immediately. It makes possible that during the creation of transfer order you CAN put a flag in the confirmation checkbox.
If you use it together with "propose confirmation" flag (setting for WM movement type; V_T333-VQUIT), the falg in confirmation check box will be populated automatically during TO creation.
Edited by: Csaba Szommer on May 10, 2011 11:22 AM

Create T.O using outbound delivery. Need to update the storage type.

Hi All,
I am using L_TO_CREATE_DN to create a T.O using an outbound delivery. It creates the T.O. But I need to decide at the time of creating the T.O the storage type to be used.
I tried using the F.M L_TO_CREATE_MULTIPLE but that does not update the Delivery flow.
I have already gone over the discussions on forums for L_TO_CREATE_DN but none seem to answer the question of updating the line items of the transfer order yet.
I was hoping someone could help me out with this.
Thanks,
Arup

Hey,
Well I do not need to be worried about the storage bins as that is a selection based on a FIFO strategy. It is returned by the system.
I need to worry about the storage type.
So here is the complete requirement.
I have to create TO's for LM05 and LM45. The LM45 To's have to be associate with storage units and this association occurs only if I choose VWT as the storage type..
When I choose VWO as the storage type then the items are not associated with a Source Storage Unit. This is because the storage type VWO does not have SU management active whereas VWT has SU management active.
So, what I am primarily concerned about is the way I could enter the storage type information dynamically.
Arup

How is the storage type for a component picked automatically in PO staging

Hi
The Process cycle is :
Sales Order created MRP-Planned Order ---Production Order
Problem : Transfer Requirement not created for Picking
Now if I go to Co03--GOTOWM Pick list , For the component the storage type is notr updated automatically
I compared with Materials for a TR was created & found that Storage type 100 was updated automatically
Q:How is the storage type for a component picked automatically in PO staging (WM activated )

Hi Rajesh
Thanks for your inputs . Actually I forgot to mention that the client is not using Storage type in any of the material master data
The problem was because the control cycle was not maintained for the combination of material /Plant & Supply Area
Anyway thanks for your info .Appreciate your cooperation
Arindam

TS1702 I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also can't use iCloud with Pag

I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also I can't use iCloud with Pages between the iPad and PC, although I purchased extra storage in order to do this.

If you have a PC, you don't have Pages on it. You can transfer Pages presentations to/from iCloud via http://www.icloud.com , however -- you just won't have an app on your PC to deal with Pages documents. Make sure that you have your iCloud account properly configured on your iPad.

Can I select the Storage type of Azure Backup from April, 1, 2015 ?

Can I select the Storage type of Azure Backup from April 1, 2015 ?
I want to select the Storage type for saving money and for purpose.
"$10 per protected instance for each 500GB per month + Storage consumed".
The price of Azure Backukp from April 1, 2015.
I want to select the Storage type.
LRS type = for client pc backup to saving money.
GRS type = for critical server backup to protect against disaster.
Regards,
Yoshihiro Kawabata

Short answer - yes, in the new pricing model, you can select LRS and GRS storage. That being said, we are going to update this and other questions related to the pricing change with a list of FAQs hopefully by next week. Please bear with us
Thanks
Shreesh

User exit Used while defining the storage type

Hi all,
Can anybody tell me about the user exit Used while defining the storage type.
or what is the user exit name?
i want to define my own strategy.
i.e combine manual sut entry with strategy 'k'

HI all I Got the Exit MWMTO003.
Now ,
Following Logic is to be built. (Storage type strategy is K for putaway.)
u201CManually selection of SUTu201D while Putaway , For Strg -K SUT selection is
system guided.
Which componant is required for this. Pls guide.
Is the above requirement is possible?
Edited by: dev .. on Feb 19, 2009 1:58 PM

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

What is the difference between the DataSource types in BI?

Hello,
Can someone please explain what is the difference between the four types of DataSources: DataSource for transaction data and DataSource for master data which contains DataSource for attributes, DataSource for texts and DataSource for hierarchies and explain and demonstrate at which scenario I will use each one?

When you load data into Cube/ODS, i.e. Transactional data, and you load data into it from Transaction Datasources.
For every Infobject there is Master data associated with it, and Attributes, Texts and hierarchy are types of Master Data.
Say Vendor is InfoObject, and its master data:
Vendor Vendor Desc
1 One
2 Two
Now in Transactional data Vendor 1 can be having multiple entries, and master data contacin master data of that person. Like if u go to some store, your address and personal info is going to save ones, and master data, and next time when you order something your personal details comes from master data, and whatever you buy comes under transaction data. Now with respect to you there may be many attributes, like address, contact number, and so on....and text is what which is going to describe in short who is this person. HIerarchy could be some chain, will tell how you r related to some other person, may be like if someone referred you.

MLGT - How to find the Storage Type

Hello,
I have been trying to use MLGT to find the storage type but I have discovered this table does not have all the records. For example - I know that material AAAAAA using Wharehouse number BBB should show CCC for Storage type but when I look in MLGT I see that AAAAAA does not have a record that uses wharehouse number BBB. When I look in MM03 I see that the material has CCC for the storage type.
Does anyone know why this table would not have all the records? Is there a better table to get the storage type?
Thanks,
Matt

I am not able to catch what you try to achieve.
MLGN-LTKZE is just an indicator. if it has the name of a storage type, then either by design or just by chance.
SAP takes this indicator to lookup the placement strategy. (setup in trx OMLY).
There you can see all possible storage types.
A storage type view at a material master is almost only needed if you use fixed bin strategy. then you can specify the fixed bin per storage type in a material.

Transfer of stock between the storage types in WM

Similar Messages

Maybe you are looking for