Transfer old computer applications to a new Mac Pro

What is the best way to transfer older Mac Pro hard drivel new Mac pro

This pair of devices and a pair of eSATA cables could act as a bridge between old and new:

Similar Messages

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • Trying to install an Adobe Application on my New Mac Pro????

    I just purchased a new Mac Pro. I got it mainly because I want to be able to use programs like After Effects CS3 at fast speeds. I have like 5 gigs in my computer right now so I'm excited to get started. Only thing is......my version of After Effects CS3 was acting weird so I decided to Re-install it. I threw the unwanted After Effects Install in the Program "App Zapper" which supposedly erases everything associated with the program......essentially you're supposed to be able to zap yourself CLEAN of the program.
    When I tried to reinstall the computer told me that I can't install because it thinks its still there?? aAre there remnants of the program to remove so the installer doesn't think its on there??? Where are they??? I tried to find anything named After Effects CS3....I can't find anything??? Any Advice

    Hi Keith Middlemiss;
    I had a very similar thing happen to me with the PS CS3 beta. I removed it and attempted to install the real version when it came out only to be given an error message about it still being on my system. Finally I went to the Adobe forum and discovered that there was an uninstall script there. Once I ran that then CS3 installed without any problems.
    I was looking around on my system for tracks of this script but I was not able to find any.
    My suggestion would be to go to the Adobe forum and check around for uninstall scripts. While I do like the Adobe applications, I hate the way they way they stick stuff everywhere in your system.
    Allan

  • Starting up problems from an old boot drive in a new mac pro

    Just purchased a refurb mac pro last weekend through the apple store. I took my old drive my my first mac pro and was trying to usee it for the boot drive, That machine did not come with snow leopard. I did upgrade it to 10.6.6. When I start up from that drive in the new mac pro it was either starting up real slowly or starting up and would not give me a cursor or. On some occasion I would get a translucent blue huge on the screen. Or I could get a clear screen but nothing would happen if I clicked to open anything. I called support and we reinstalled the on the old drive. I seemed stable and was booting properly from the old drive. Then I upgraded to 10.6.6 again. We used the software the new machine came with for this process. I maybe used the new boot drive for maybe 50 seconds. Apple support wishes for me to go through the process of isolating elements. I've been running the new drive since yesterday. Everything is working well. Except after letting it run for a period of time yesterday got s grey screen after it went to sleep. We'll see what happens with that today. I do not know if it's coincidence or not but the old system went hicky after I started up Paralllels desktop.I'm using Parallelsto run Playon. I'm wondering if Parallels or the xp emulation machine I'm running with it is still trying to read the old macpro ? It did work however. I'm just curious that it's altering something in the Mac osx ? Another thing should I subtract other wirleeless choice devices on the old drive's system ? The old macpro had wireless but the module was installed aftermarket by a mac store.
    Thanks

    Hard to follow your steps and thoughts. Maybe re-read and cut it into actual steps.
    Always clone a system so you have a bootable backup image.
    Make sure your software and drivers are compatible.
    2010s boot into 64-bit kernel mode by default.
    Apple still sells 2009s also on Specials page.
    Your old Mac Pro wouldn't come with 10.6 unless it came out in Sept 2009 or later.
    Is Parallels current? Is it attached to Windows partition or VM only? does it care that it is running on new hardware? that usually is a non-starter.
    New Mac is also a good time to do thorough spring house cleaning. Clean install all the applications and drivers.
    Pull your old drive out. The only use for it would be to run Setup Assistant to import your home account prefs.
    The "new" refurbished hard drive is still in same state it was in when you got it?
    Sleep issue. you may have external devices or 3rd party drivers or bad cable somewhere.
    Wireless?
    At this point I doubt I can read between the lines.
    +Break it into compartments and subjects instead of hash stew for us!+

  • Old AJA KONA card into new Mac Pro.

    Hi all
    At the company where I am doing some editing, there oldest suite was run on a G5. Suddenly it started to turn itself off. After taking it into an apple store for repair they quite quickly turned around and said "This is an old G5 we can't repair it, but we will replace the machine with a new Mac Pro, for the price of the repair". Great!
    However the the KONA LHe card that it was using looks like a normal PCI interface (or PCI-X), and it seems apple have done away with this, as this new model contains only PCIe slots. Is there a way of making it work? Does anyone know if apple do a spec with a PCI slot now? Is this KONA card completely useless now?
    I know what the likely answer is, just thought i'd put the discussion out there.
    Neil

    Sorry Shane. I did mean LH.
    I always thought the card in the machine was a LHe card, so when the G5 starting turning itself off unexpectadly, and Apple couldn't repair it, they gave us a new machine for the price of the repair, I thought it would still be fine as the card is an LHe. I didn't know that it was an older model and the earlier generation Kona Cards were PCI-X.
    Hey now I know the what e stands for at least. Although in the context of this company the Kona LH card is pretty much Obsolete!
    Thanks for comments.

  • I have an old and new mac and used transfer manager to put the old mac on the new so that i have both users on one computer but now I can only log in as the new and as guest so cant access my old computer docs on this newer mac.  Help!

    Hello I have just sold my old macbook and so transfered all my data to my newer macbook using transfer manager.  This allowed my to login on the newer computer under either the old or new username so I could access both computers' data on my newer computer.  Last night that worked but today I can only access my newer user and a guest user.  Where did my old user name and all the data go after the transfer?  Help please! I have to give the buyer the old computer today!
    Aminah

    I am not familiar with "transfer manager." Did you perhaps use the Migration Assistant? What operating system is installed on your new computer?
    If you look in your hard drive, in the Users folder, do you see a folder with the name from your user on your old computer?
    Best of luck.

  • How do I get an old iTunes account from an old computer open on my new mac book?

    I have a macbook pro but used to have an old pc. My itunes is set up on the old computer and I would like to migrate it to my new macbook.
    Any help would be greatly appreciated.
    Thanks

    http://support.apple.com/kb/HT4527

  • Can't open After Effects on new mac pro

    When I try to open After Effects on my new mac pro it tells me that I cannot use this version of After Effects with this computer. I have the CS6 master collection and all the other apps in the same collection work fine.

    MLM_ANIM did you migrate or transfer your Adobe applications to the new Mac Pro?  What version of Mac OS specifically are you using?

  • Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

    Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

    I'm smarter now. It worked fine.

  • Installation of Final Cut Studio on new Mac Pro

    Hello all,
    I have just purchased a new Mac Pro, and am preparing to install Final Cut Studio upgrade. The wrinkle for me is that I have Final Cut Pro 3.02 installed on an old G4 Power Mac. I have two video projects on the old computer, also backed up on external drives, that I want to be able to edit on the new computer.
    I am planning to install my old FCP software on my new Mac Pro, then install the FCS upgrade software. Is there anything I should know or do before doing this to make sure that I will not have any trouble either 1) installing Final Cut Studio upgrade, or 2) accessing my old FCP files.
    Many thanks in advance for your wisdom and assistance.

    I've successfully installed Final Cut Studio. Thanks, David, for the installation tip.
    Now I am holding my breath that I will not have any trouble copying scratch files for my most important projects to my second hard drive, or opening these projects on my new computer.

  • External iSight - New mac pro

    Hi Guys,
    I've bought myself a new mac pro with two 27" screens, and everything works hunky dory, BUT I want to drill through my office wall and put my old iSight camera in the lounge, and run the cable through tje wall back into my Mac pro. Its only a metre so no problem with length. My problem is how do I plug in the old firewire connector into a new mac pro. The idea is that when I'm away from home I can see my lounge and make sure everythings ok. I assume I can change camera in Skype from screen to iSight using back to my mac? Thanks
    brett

    Some ways to connect your FW400 external iSight to a FW800 Mac port:
    • This Firewire 400-800 cable can work: http://store.apple.com/us/product/TP320LL/A
      (I use this one.)
    • Some report that this low-priced alternative cable works:
      http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097"
    • To use a FW400 6pin-6pin cable, you can use a 6pin-9pin adapter like one of these:
      http://tinyurl.com/ydsbb6m  (I use this one.)
      http://tinyurl.com/cgll7o
      http://www.sonnettech.com/product/fw_adapter.html
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • I would like to transfer my old copy of Photoshop Extended, from my old Windows laptop to the new Mac computer. Thank you

    I would like to transfer my old copy of Photoshop Extended, from my old Windows laptop to the new Mac computer. Thank you

    If your copy of PS was for Win, your installation disk is not compatible with Mac.  You can't use a Win serial number on Mac either.  You would need to contact Adobe Customer Care and request a cross grade.  Depending on which version you own, this may no longer be possible.  I believe CS6 still qualifies for cross grades though. 
    Another option is to join the Creative Cloud Photography Plan ($9.99/mo) which includes PS CC and Lightroom which will run on on both Mac & Win.
    Creative Cloud Photography plan | Adobe Creative Cloud
    Nancy O.

  • HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

  • I just got a new macbook. Is there any way I can transfer pictures or music to this new mac from my old one?

    I just got a new macbook. Is there any way I can transfer pictures or music to this new mac from my old one?

    Welcome to Apple Support Communities
    There are different ways to transfer your data from another Mac, but as you just want to transfer pictures and music, the best way is to use an external drive. You can also connect them with a Thunderbolt or FireWire cable, but you need specific Macs to do it, so I prefer the external drive method.
    You just have to get an external drive and plug it to the old Mac. Then, open Finder, navigate to the folders with your pictures and music, and drag them to the external drive in the Finder sidebar, under "Devices".
    Then, connect the external drive to the new Mac and you will see the external drive in the Finder sidebar after opening a Finder window, so choose it. Then, just copy the pictures and music to the folder you want, for example, Music or Pictures

  • HT1209 I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

    I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

    Thanks roaminggnome. Can I do that transfer wirelessly or do I have to get a large jump drive to copy and transfer. I presume that I cannot use my iPod right?

Maybe you are looking for

  • Can you use a external hard drive to keep all your iTunes info on it

    Can you use a external hard drive to keep all your iTunes info on it

  • Latest version does not work with godaddy ftp file manager

    Godaddy has a facility call FTP file manager which is easy to use for the small file uploads via your browser. It is very conveinent and worked in exactly the same way on old versions of firefox as it does on IE. Now using the latest Firefox it does

  • How do I change the page address?

    I am trying to figure out how to change the address of specific pages in an ADF application. Specifically, adding a directory that the page is located in. For example, if the page is currently located at "http://localhost:8000/context-root/faces/page

  • Settings for Depot as well as Mfg in one plant

    Hi, I have one  requirement the present we have one company code and one plant assign to it, the all setting and CIN configuration are as per manufacturing plant,  we capture the excise inovice in J1IEX or MIGO  then production cycle ,make the excise

  • Oracle Database Users

    Hi There, I've been asked to review a security implementation in which every user coming from the front end has their own Oracle database login. I wanted to know the pros/cons of doing these. I know the usual way is to complete the authentication thr