Transfer old PowerBook G4 to brand new Imac

I´m eagerly awaiting my new Imac 24" just ordered from Apple internet Store. While waiting I would very much appreciate to get any tips on smart ways of transferring old data, applications, etc. from old to new. Do´s and dont´s in other words. Like old applications to new Intel machine, any problems? Or any automatic tasks? Good idea to first install the panther on the old machine? etc etc. Any tips or comments, brief or big, muchly appreciated.

Hi Jon -
I just bought a new iMac and transferred files over from my old G4 Powerbook so I hope I can help.
My first attempt at a transfer was not good as I used Apple's Migration Assistant software. I had problems with my applications - specifically the Adobe CS applications asked for serial numbers again and would intermittently crash. The only way I could see of resolving this was to erase the HD and then re-instal the OS with the Leopard disk which came with the iMac, then re-instal my applications from scratch and I have since had no problems.
I simply drag copied everything else - fonts, documents, music etc into the relevant folders on the new iMac - just in case there were further problems using Migration Assistant. Everything works like a dream now and the machine is incredibly fast compared to my old G4 Powerbook.
It would help if you used your Powerbook as an external hard disk so you can copy your files straight to you iMac. To do this you'll need to -
1. Shut down your laptop then connect it to your iMac with a Firewire cable
2. Start up the laptop and hold down T key at the same time which enables Firewire target Disk Mode (you'll see a Firewire logo as a screensaver).
3. Your laptop should now appear on your iMac desktop as an external HD and you can now copy files over.
Go here for more detailed instructions:
http://docs.info.apple.com/article.html?artnum=58583
Let me know if this helps and how you get on. Enjoy...

Similar Messages

  • I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    AMoriyama wrote:
    I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
    I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
    I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
    All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
    Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
    At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine.  By clicking on it you can navigate through it any way you like, just as you would normally.
    Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
    - or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

  • HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

    I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

    Welcome to the Apple Support Communities
    When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
    In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

  • How do I transfer my contacts from my old Powerbook G4 to my new Macbook Pro?

    how do I transfer my contacts from my old Powerbook G4 to my new one Macbook Pro?
    new Macbook Pro is operating on OSX 10.8.2
    When I save it as an export then try to open it on the new computer it wants me to delete all my current contacts before it will import.
    What happened to MERGING?

    On the PowerBook G4, open Address Book and choose File > Back up Address Book...
    Save it to your Desktop or directly to the MBP if it is already connected. Otherwise copy the Address Book backup file to the MacBook Pro. Email is also an option.
    On the MacBook Pro, open (double-click) the Address Book Backup (abbu) file:
    Contacts will launch and display the following:
    Click Replace All which will do what it says.
    Using Migration Assistant to migrate from Tiger to Mountain Lion simply does not work. Tiger to Lion works, Tiger to Mountain Lion does not. Apple does not provide specific directions regarding the use of Migration Assistant from Tiger to ML, only Tiger to Lion.

  • How can I transfer data (iTunes/iPhoto) MacBook Pro (Late 2011) to my brand new iMac 27" - Apple Support couldn't help me and did not make the promised call-back

    I have a late 2011 MacBook Pro 13" and bought a brand new iMac 27" last week.
    I tried to transfer data (musdic & photos) via Thunderbolt, but i did not run, my system always
    tries to transfer data via WLAN, but that would last more than 80 hours.
    I tried to get some help from the Apple Support, but unfortunately they couldn't help me.
    A promised call-back from the next higher support-level has not been done.
    Does anybody know what the problem might be.
    The Thunderbolt-cable is brand new.

    Instead of using Migration Assistant, the best way is to use the Target Disk Mode, so you will save headaches (Migration Assistant creates a new user with the transferred data).
    To do this, just connect both Macs with the Thunderbolt cable, and then, start the MacBook Pro holding the T key, so a Thunderbolt or FireWire icon should appear on the display. After that, go to the iMac, open Finder, and the hard drive of the MacBook Pro will appear on the Finder sidebar as an external drive, under "Devices". Just access to it, go to the folders with your iTunes and iPhoto libraries, and copy them to the iMac

  • HELP! brand new iMac froze during firewire transfer and won't start!!!

    During my setup for my brand new iMac I follwed the directions and connected my iBook via firewire to transfer my files. I noticed after a while that my iMac was frozen on "45 minutes remaining" and the blue line wasn't wavering a bit, and after over half an hour it hadn't moved. I powered off the iBook, and still nothing happened to the iMac screen--it remained frozen. I went to the guidebook and nothing seemed to work, so I powered off and on again, only to get a flashing question mark. All this and I just bought the darn thing tonight!
    Help! Anyone know what happened and more importantly how to fix it?
    Thanks.
    Lindsay

    it sounds like the iBook went to sleep during the transfer or at least it's hard drive spun down.
    what you need to know is hope that simply booting from your install DVD will let you repair the iMac's hard drive. You could also try booting holding down the Command S keys on startup and when you get to the Single User Mode command line prompt follow the directions there for running fsck to repair your hard drive.
    Do you have a FW hard drive? Can you copy files from iBook to FW and then from there to iMac?
    And, it is always nice to have a FW emergency/backup hard drive. The iMac needs a different partition scheme to be bootable from FW than the iBook does, but you can create the proper partition type etc from a Tiger Installer and put OS X on FireWire, then see if you can backup and repair your iMac's hard drive.
    MicroMat's TechTool Pro 4.5.1 is now shipping and is compatible, Universal Binary and bootable. Always good to have some 3rd party utility handy.
    If you are just starting out, you probably don't have much if anything installed yet, so you may want to just erase your iMac drive and restore to what it was. That would be the easiest if Disk Utility won't repair it.
    Instead of powering off the iBook, I would have tried to force quit whatever was running, like Migration Assistant.

  • If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

    If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

    Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

  • Apple support says brand new iMac is too old to provide support

    Why when I have a brand new iMac OSX 10.8.3 on entering the computer's id number Apple support states that it is too old to provide support?

    Call Apple Customer Support and ask them for clarification on this issue.
    Allan

  • Can I use Adobe Photoshop CS4 Extended on my brand new iMac? I had PS on my old Mac using the student licensing.

    About four years ago, I purchased Adobe Photoshop CS4 Extended while I was in undergrad. I downloaded it to my Mac. Since then, I've purchased a brand new iMac. Can I use this same software? I know it's been four years so the software is very updated, AND my new iMac does NOT have a cd drive. This may all be in vain. I'm just clueless! Thanks!

    Emalexander89 you are welcome to install Photoshop CS4 on your new Mac.  You can download a fresh copy of the installation files at Download CS6 products.

  • Brand new iMac will not boot, just make's funny "bonk" sound.

    I have a brand new iMac (Intel, 20-inch flat panel). Just out of the box. Ran through set-up wizard. Used firewire to transfer files from an old CRT iMac. All was good for about an hour.
    Tried to empty the trash. Finder says Trash was emptied, but, if I open the Trash, the 50-odd files I just deleted are still visible! If I try to select one, its icon immediately disappears. Hmmm....
    I decide it's time to restart.
    Upon restart, computer will not boot.
    I push the power button. I hear the startup chime as usual. Screen lights up gray. But no apple logo on the screen. There is a long pause. Screen remains gray. Computer then starts making a soft "bonk" sound every 4-5 seconds. (Kind of hard to describe the sound, just imagine clipping the very first fraction of a second of the normal Mac startup chime, and repeating it every couple seconds.) This continues indefinitely.
    If someone has experienced this, or has advice, please let me know your thoughts. Feeling rather bummed. Thanks in advance!!!
    iMac Intel 20-inch 2.16 GHz   Mac OS X (10.4.8)  

    Boot from the Install Disk 1
    I cannot boot at all (see my post above). The
    machine just sits there with a blank gray screen.
    I appreciate the article link, though. I've already
    read it and it will make a great reference for the
    future, provided I can get back to a place where this
    iMac actually runs.
    Since you're new to Macs, I'm sure you don't realize that while your iMac is sitting there with only a gray screen, you can insert/push in "Install Disc 1" - and it will be accepted. Then press and hold down the power button until iMac shuts down. After waiting a few seconds until everything has settled, press power button and immediately upon hearing the usual Mac startup tone/chime/chord hold down the "c" key until you see the spinning progress indicator below the Apple logo. It will boot to the DVD, you will be able to use (from the Utilties pull-down menu) Disk Utility to "repair" the hard drive directory, then you will be able to quit the installation process, choose Startup Disk from that same Utilities pull-down, and restart your iMac:)

  • Brand new iMac 27" i3 is flashing blue screen

    My brand new Imac (one-day old) is acting very odd as it slowly flashes a pulsating light blue screen when I try to access Apple Menu (restart/sleep/shutdown) features. No matter what I do it will not turn off. I have since had to do a hard shutdown but now it stops at an error screen upon start-up that tells me to restart!
    I am Mac savvy and this has never happened to me. Prior to this happening, I called Apple Tech Support because I could not use their Mac Migration feature to move my info off of a G4 running 10.4.11. Tech support could not help either as wireless, ethernet and direct Firewire attempts yielded no Migration results. I finally had to pull the hard drive out of the G4 and hooked it up to the new iMac. Everything seemed to transfer except when it was done the contents of what I just copied thru Migration was nowhere to be found. That is when I started experiencing the slow-flash blue screen phenom and is where I am stuck today.
    I am ready to take this thing back. In all my years I have never had a problem like this with an Apple product. Any help or insight will be appreciated.

    ONE
    Paul has given you good advice in that I would reinstall the OS from the supplied disks to get your computer working properly.
    TWO
    Then re-install your old programs (only those you really need since they are likely PowerPC, not “universal” Intel programs) from their original disks.
    THREE
    If you have the user data from the old drive backed up, then hopefully you can restore your user data to the new drive or buy an enclosure and access the old data as needed (which is what I did when originally migrating from a Power Mac G5 to the iMac (late 2009).
    Alternatively, if step ONE is problematic and your machine is defective, you can likely return it to Apple within 14 days (or whatever the law is in your country) for a replacement or refund and purchase a new iMac just released today.  Steps TWO and THREE still apply in this case.

  • Brand new iMac want to install previous data from Time Machine back up, brand new iMac want to install previous data from Time Machine back up

    I am waiting on a brand new iMac to repace my 2007 iMac. I have a Time Capsule and use Time Machine for auto back ups. What do I need to do transfer all data from my older iMac to my new one? I am not running Mavericks on the older iMac but have upgraded all along till the Mavericks free upgrade. Do I need to update the older Mac to Mavericks to make the restore easier.
    Thanks for any guidance,
    JTMav

    PowerPC = PPC, this is the architechture of microproccors that Apple used prior to 2006 when they transitioned to Intel based microprocessors. Apple supported PPC based apps from 2006 to about 2012 when Lion (10.7.x) was first introduced. They gave users 6 years to upgrade all of their legacy apps to Intel based apps. Even after 6+ years some users still complained because their old apps would not run with new versions of OS X, that is technology though.
    You might still have PPC based apps, if you do and you want to use them they need to be upgraded or replaced. I have noted a link to an article that will help walk you through to see if you have any PPC based apps. If you do then you can decide if you want to continue using them or upgrade.
    http://osxdaily.com/2011/07/15/how-to-check-if-applications-are-incompatible-wit h-mac-os-x-lion/

  • How do I uninstall Mavericks and recover Lion?  I have a brand new iMac and web pages stall or freeze since I installed Mavericks.  I can't get it to download software for my printer when I connect it.

    I have a brand new iMac.  It was working fine until I downloaded Mavericks.  Now I have web pages that freeze while trying to load.  The blue in the address bar stalls and freezes.  If I try to load from page 1 to a later page, or reverse that, I also have the same problem.  I tried to connect my printer for the first time, and again, the blue progress bar froze.  Then I got the yellow  triangle telling me there was a connection problem.  My internet connection is via an Air Card as that is my only option where I live.  I packed up the whole new iMac and took it to my Air Card provider, where they also have very fast Wifi, and they had the same problem with Wifi.  I use my Air Card with my MacBook and it works JUST GREAT!  I really want to return to Lion.  HELP.

    The only way to retutn to Lion is to format your drive (erase, lose all) and either:
    1. clone back the clone copy i hoep you have, or
    2. first backup your files, then format and install Lion again
    But really, mavericks works great. You have a problem. Find out why. First, what unusual software do oyu have installed that may be conflicting with it? Virus, system modifiers, etc?  Second what OLD software do you have that might be the problem.  finally, you might need to do a re-install if something errored during install.
    Grant

  • Old iPod mini with a new iMac using a different iTunes library

    I just bought a new iMac (never before owned one). I have an iPod mini with a bunch of music on it that I downloaded from a library on an IBM, which I no longer have. How can I transfer all of the music that is currently on my iPod mini to the library in iTunes of my brand new iMac? I can't seem to find any options that allow me to do this. It looks like I can only erase my iPod memory and replace with the Library on my iMac, which is currently empty. Please tell me that I don't have to re-create a new libray on my iMac.
    Thanks for your help.

    Thanks for the information. I just got done with the iPod. I was able to use Senuti to dowload all of the contents of my iPod into iTunes and then update my iPod mini's software and reload all of the songs back onto the iPod. It was freakin' awesome!!
    You really saved me a huge headache and a boatload of time!!
    Thanks again!!!

  • How to restore machine using a TM backup on a usb hard drive from older imac to a brand new iMac?

    My imac (the one that had a superdrive in it), had a broken superdrive and was sent for repair. Whilst being "repaired" the screen was broken. I now have a brand new imac albeit without a dvd drive. My question is how to I restore my the old TM back up which had been made to an external usb hard drive to the new imac. Help files say that I should not restore from a TM file to a different machine and that I should use migration assistant. Whilst I can see the external usb drive in TM it is not being recognised in Migration assistant when I click on back up from a TM backup on another machine or disk.
    Any ideas?
    Just noticed that this new machine is running OSX 10.8.4  the broken imac was on mavericks

    This is very simple first run Software Update on the new machine and get your machine upgraded to the most recent version of Mountain Lion 10.8.5. Install all other software updates Apple recommends in Software Update. Then care fully read Pondini's guide on using Migration Assistant located at:
    http://pondini.org/OSX/MigrateLion.html
    Your migrated data will be in a new account, to access it log into the new account.
    Also DO NOT repeat DO NOTuse Wi-Fi to migrate data, if your TM backup drive uses USB, then connect it via USB and follow the on-screen instructions as described in Pondini's guide.

Maybe you are looking for