Transfer order craeted with a quantity -- more than delivery quantity

Transfer order created with a quantity  more than the delivery quantity. I have tested in several ways but didn't get the root cause for it.
Any possible ways available to create a TO like this????????

Hi Aktar,
You have not mentioned the type of TO. Where did you get this scenario. was TO created Manually or Automatically? please confirm.
Anyway incase of manual creation of TO, User keyin quantity enters morethan delivery quantity, then there is a chance of excess picking compared to delivery quantity. but this is only possible if the sufficient SKUs are available at this time.
please let me know.....
Regards
Venkat

Similar Messages

  • Withdrawal quantity more than Committed Quantity

    Hi Gurus,
    I am facing 1 problem with Withdrawal quantity for 1 component for  Production order.
    I have a Production Order of 430 Quantity .
    When I check components , it is showing Committed Quantity as 435 while withdrawal Quantity as 439.
    We have activated backflush.
    Can anyone tell me why Withdrawal quantity more than Committed Quantity and order quantity?
    --Denish

    Hi,
    Commited quantity is the quantity which, according to the availability check, is available.
    Wwithdrawal quantity is the quantity that has already been issued.
    Probably, you issued this component more than you planned, however you have done this issue with backflush of production confirmation. Therefore, issue is still on planned issue and withdrawal quantity exceeds your planned quantity, and commited quantity is less than withdrawal quantity.
    Regards.
    Onat

  • SAP sales return system should not accept quantity more than open quantity

    Dear All
    During sales return user is able to enter the quantity more than open quantity and system is allowing for that enter
    Plz tell me how to restrict this
    Regards
    Arun

    No need of exit for this.
    Go to VTAF, select the item category for the combination of order type and billing type and maintain "+" for the field "Pos./neg. quantity"
    Also go to OVAH and change message class V4 no 229 to E will work.
    Now try to create a return order and increase the quantity.  Sytem will not allow to do so but if you create a new line item, then system will also for which, you can go for exit already suggested.
    thanks
    G. Lakshmipathi

  • 541 quantity more than PO quantity

    Dear Freiends,
    For subcontracting PO we can send (541) components more than the quantity maintained in Purchase order. How to restrict this ? We donu2019t want to send material more than Purchase order component quantity.
    Pl send your views
    Regards,
    Poonam

    Analyse your process.
    If you dont want to send more than needed for one PO, why do your shipping guys then send more?
    Dont you use ME2O as starting point for your supply to the subcontractor.?
    The movement to a subcontractor is not PO related, and I doupt that it can be made PO related with the given intruction by kunal ingale, as SAP has stated in an OSS note, that it is not possible  (but try it, I am intrested on your findings).
    It makes sense that it is not  PO related. if you are doing ongoing subcontract business, then you probably like to optimize your freight rates, so you may send raw materials  just once a month to your subcontractor, and not always partial truck loads that are more expensive.

  • ERROR: PGI in delivery with picked quantity less than delivery quantity

    Hi Friends!
    I need your help, i have the following situation:
    Outbound Delivery with batch position:
    90001  Mat DD3450 Picked Delivery Quantity=98 and Picked quantity=84
    Overall Pick Status = "B"
    Overall WM Status = "C"
    The outbound delivery was posted completely and the following documents was generated:
    WMS transfer order:  With 84 UN in quantity
    Material document:  With 98 UN in quantity
    Invoice: With 98 UN billed
    The question is how was posible to generated the PGI for the outbound delivery when the picked quantity was less than delivery quantity? is a SAP program error?
    Thanks
    Best regards
    Enrique

    benito,
    Check your Picking Confirmation config. as you are using WM/Lean WM, then your Shipping Point should have a mandatory requirement to confirm all TO's. The confirmation should update the Picking Status and the Overall GI Status to 'C' (with any relevant changes to the picked qty). Give that a go.
    Cheers,
    Paul...

  • Material issue quantity more than resevation quantity

    Hi,
    My problem is, user can issue the material quanitty agaist a reservation more than reservation quantity. We are using movement type 281 Q and issuing material against a reservation no. How to stop this?
    Regards,
    Kalpesh

    Hi,
    This a standard functionality, material can be issue more than reservation. Beacause reservation is nothing but just a booking process
    Check for any userexist take the help of ABAP person
    regards
    Edited by: Roy Anamika on Jul 9, 2009 11:48 AM

  • SALE ORDER QUANTITY LESS THAN DELIVERY QUANTITY ? NO CECK IN SAP ??

    Hello friends,
            I created a sales order of quantity  10 , having two material codes each having quantity 4 and 6 . i created delivery for the one by putting delivered quantity 4 and save , then i created delivery for second and put delivered quantity 8 which was greater than the sale order quantity left ,system saved the delivery and didn't popped any error message.  
                                     Does SAP have options to over come this mistake by end users.
    regards

    Dear Joshi,
                      Please get in touch with your abap er as there user exits which can be written to avoid this situation.
                      Let me explain you further one more situation.
    First one, Your query is if for  item A ord qty is 6 the system saved the delivery with 8 qty which is greater than ordered quantity.  I know the gives a warning doing this.
    Second Situation :
    Say item A ordered qty is 5, and i made a delivery for 3 and saved it. Now the open quantity on the order is only 2. (5 -3 =2).  But one of our users reduced the ordered quantity to 2 despite saving a delivery with quantity 3.
    so the situation is ord qty is 2 and delivered is 3 qty. which is again wrong. But while reducing the ordered quantity less than the delivered quantity the system gives a warning message telling "  ORDERED QUANTITY IS LESS THAN DELIVERED QUANTITY ".
    Also just imagine we made delivery for qty 5 and invoiced it.After which you reduced the delivered quantity to say 3. So delivered is 3 but invoiced is 5.
    Hence for these kinds of practical problems we have addressed them through user exits with the help of our ABAP'ers by turning those warning messages into error messages by selecting the suitable message class.
    Hope the explanation helps you. And thanks for all your patient reading.
    Reward points if useful.
    Thanks & Regards
    Sadhu Kishore

  • GR Quantity more than PO Quantity but no differential payament to be made

    Dear Expert,
    We are importing Ammonia for consumption in India. In many times actual GR quantity is more than the PO quantity, however only Customs payment are made against the excess qty received, no other payment to be made towards port handling, suppliers, stevedoring charges, port dues etc. So before GR we only do customs invoicing for GR quantity so that it get inventorised. How ever our MM people only doing GR for the PO quantity.
    When we asked why they are not doing the GR for actual quantity they replied that value will be posted to various clearing a/c like, port dues clearing, customs clearing, insurance clearing a/c etc, where there is no actual payment to be made.
    Please suggest how can we do the actual GR quantity with out hitting the clearing a/c, any solution???
    Regards,
    Alok

    Hi,
    First let me ask one thing ,is so they are doing GR first or IR first .
    Becoz the Question a Bit confusion.
    But if my understanding is right.
    You can do the Invoice for the over delivery and also the IR first that to GRN.
    so maintain a Overdelivery Percentage in PO and try to Post the MIRO Before GRN.
    but in MIRO,you should select the Option of Planned Delivery Costs.
    and you have to define different condition type for Different Conditions like Freight ,customs and insurance etc..
    Know in the Miro Select only the Custom releated Condition type and uncheck the other.
    so that only that GL will come.
    try and let me know
    Hope so it would help
    Regards
    Anjanna

  • Invoice quantity greater than delivery quantity.

    Hi Friends,
    I came across one rare issue. please give your suggestions on this
    user created the commercial invoice in VF01 with reference to the delivery document. After saving,  it was found that invoice created with 120 quantities while delivery was for 80 qtys.
    while creating invoice ,system showed one error message: ZXXX (condition) is zero.
    whereas the proper condition record was maintained in the system.Then user came out of screen again executed the VF01 and this time he put pricing data as current date & after that put delivery no. and executed. after execution user saved the document. Here system didn't show any error message and also user was able to save the document.However after saving it was found that invoice was created with greater quantities than the delivery quantity..
    Regards,
    Sandeep

    But why this was happened as this is the first time system behaved in this manner? existing configuration has completion rule-' '(Blank), however it was working fine for yrs and since configuration is at company code level it can't be modified easily.
    Regards,
    Sandeep

  • Goods receipt quantity more than po quantity -units

    Hi
    Purchase order is created for 100 units
    But Good receipt and Invoice receipt is 125 units
    I was unable to post the goods receipt of 125 units against the PO order of 100 units
    Can you let me know how do i post the good receipt of 125 units and let me know the Img setting
    which needs to be done for goods receipt to be posted
    Thanks

    Hello,
    In case the business has decided that the goods receipt of 125 is correct as against a PO of 100 units, then before the Goods receipt, the PO has to be amended to 125 units. By doing so, the GR and the IV would not have any problems.
    Regards
    Venkatesh

  • Purchase Order Quantity should not be more than PR quantity

    Dear all,
    We want to control Purchase Order quantity against Purchase Requisition.
    We have configured message setting 00 076 as  ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
    But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
    When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
    What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
    Is there any other way to have such control? please provide other available options to configure.
    Regards
    Kant

    Hi,
    06 076 is only for applicable only in case of material.
    For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
    NOtes 786736
    This may help u !
    Regards,
    Pardeep malik

  • Want to Prevent Inventory Transfer More than Planned Quantity

    Dear Experts,
    I want to Prevent Inventory Transfer More than Planned Quantity. so that No one can Post any Issue for Production More than Planned Quantity has Assigned that Production Order. Using SAP Business One B1 .
    Please Advice ......
    Thanks In Advance ,
    Ajibul Hakim

    Hello Gordon,
    Thanks for your Reply . I want to Prevent Inventory transfer , which will Exceed the Planned Limit. but yesterday I Have Tried Myself again and I have succeed ! so thanks you again ,
    Also thanks to Nagarajan for your kind reply and i wanted to do like that but I want to restrict Inventory transfer...
    I have Done Like this....
    IF @object_type='67' 
      BEGIN
      IF @transaction_type='A' OR @transaction_type='U'-----Add
          BEGIN
            IF exists(SELECT * FROM  WTR1 T0
          LEFT JOIN OWTR T1 ON T1.DocEntry=T0.DocEntry
            WHERE  (T0.U_PlanQTY<(T0.Quantity+T0.U_TotalIssue)) AND T1.U_OrderType='100'
                         AND T0.DocEntry=@list_of_cols_val_tab_del)
            BEGIN
             SET @ERROR=1
             SELECT @ERROR_message = N'Issued Quantity Can not More than Planned Qty ,Check again and reconfirm please '
            END
          END   
       END
    Thanks,
    Ajibul Hakim
    Message was edited by: Ajibul Hakim

  • Sub contracting PO - MB1B - Accepts more than PO Quantity

    Hi Gurus,
    I made a Sub-contracting PO with BOM components. During the transfer of BOM components to vendor (MB1B - 541), the system accepts to transfer more than PO quantity to transfer.
    How can we restrict this transfered quantity should not exceed PO BOM components quantity.
    Regards,
    VB

    SAP does not store the PO number anywhere as a reference for the delivery/movement from your location to the subcontractor. Hence you have technically not really a chance to restrict it.
    It might be possible with a user exit to check whether the the current quantity in the movement exceeds the compónent quantity. But if you do the same movement again in the next minute, then it will pass.
    If you create a Z-table where you store the reference and the transferred quantity per PO, then you might  be able to achieve your goal.
    I personally like the SAP design as it fits to our requirements. we are a chemical company, to produce a certain finished material we need for example 23 kg of a component, however this component is packaged in a 50 kg drum.
    we do not repack the component into smaller drums just to get the exact quantity to the subcontractor. we send the full drum, which would not be possible with your wanted restriction.
    Our subcontractor does not just a one-time event of subcontracting, it is a recurring business, maybe 10 orders per month.
    So it saves a lot freight costs to ship components for one or two month production to the subcontractor, even prior to any PO.
    And we do not loose any money by sending more material, the stock at the subcontractor is our stock, is owned by us, it is not a gift that is given for free to a  subcontractor

  • Goods receipt more than intransit quantity for SA

    Hi All,
    While doing a testing on stock transport order for 2 different company code, noticed that during MIGO in receiving plant system is allowing to receive more than in-intransit quantity for a schedule agreement with agreement type LP and by showing a negative stock in intransit.
    Is there anyway to have the system block with error message from preventing user to receive more than intransit quantity for a schedule agreement?

    negative stock in transit is not allowed.
    so it must originate for a SAP bug.
    E,g, OSS note 527403 explains a case for IS-OIL Industry solution.
    Oss note 210472 a special case regading previous month.
    I found about 60 OSS notes when searching with "in transit negative"

  • Delivery quantity greater than confirmed quantity in sales order

    Hi experts,
    Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
    Anyway in system to check only "confirmed quantity" can be delivered?.
    Regards,
    Liang

    Thanks Ankur for your reply.
    The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
    But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
    For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
    I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
    Best Regards,
    Liang

Maybe you are looking for