Transfer Order : Data for storage type search is not defined (A )

Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator : E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AM

Hello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar

Similar Messages

Data for storage type search is not defined (E FC1 ) in WM module

Hi friends,
I m working in Ware house management.I have created material document and using the matertial document number in LT06.
I am getting the following error while creating transfer order for material document in T-code LT06.
Data for storage type search is not defined (E FC1 )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
Procedure
Contact your system administrator. Note down the values that are within parentheses in the error message.
Please advise me how to solve this error.
Thanks in advance.
Regards,
William

SAP does not know where to put the material.
You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
then you setup the storage type search based on this indicators.
SAP can then know in which storage type it shall search for a space to store your material.
As a first step check whether you missed to enter this indicator in your matrial master WM view

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

Block ttransfer order confirmation for storage types:

Gurus,
IS there any functionality in WM to vlock the transfer order confirmationfor particluar storage type.
I know LS06 but that wil not allow to create Transfer order.
I need transfer order to be creaed but it should get confirmed.I am not referrring to the set up in movemet type also.
If not how can we achieve this
Please help this is urgent
BR
Avinash

Can you explain in detail what you want achieve, I guess you are looking for the wrong solution.
A TO is confirmed when the material which is to be moved from A to B has reached B.
What sense does it make to have a TO, to perform the movement, and finally not beeing able to confirm this movement?
even further, an unconfirmed TO prevents the quant from becoming available for any usage.
if you dont want that one can put a material into B then you should restrict the putaway into B, which means a TO for destination B cannot be created.

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Error in transfer order creation for sto type-- bulk storage

Hi ,
Can someone help to solve the following issue, while doing the Transfer order -- " The error is --> Missing definitions for block storage control ( B1 GB 04 ) "
config settings done are
1. in material master, view Wm-2, the LE qty--> 1, un --> to, SUT --> GB
2. in material master, view Wm-1, stock removal strategies > 004 (bulk storage), stk plcmt strategies > 004 (bulk storage) and bulk storage-->04
Thanks & Regards
Amjad

Hi
Try with OMM4 for block storage control, Also Check the section check indicator in OMM4.

HL Physical Inventory: Control data for storage type is missing

Dear experts,
When performing an ad-hoc HL inventory in EWM, I'm facing following issue after I try to save the countet inventory document:
This is how my storage type where the inventory will be performed looks like:
What could be a reason for such a behaviour?
Thank you in advance
BR
Denis

Hi Denis, you need to have the parent object in the counted item list. That means it is necessary to count the HU with parent object as Storage Bin and then you can count HU content with the parent object as HU.
When I deleted the parent object I was able to simulate your error:
Brgds,
Petr

Storage type search

Hi Experts,
I am trying to create TO when I get the error message
"Data for storage type search is not defined (E 123 S)".
I may have missed something. Please help.
Thanks,
Mylene

Dear Mylene
Check this thread where the same issue was discussed
[Data for storage type search is not defined |Data for storage type search is not defined (A )]
thanks
G. Lakshmipathi

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

High Level Bin Search, before Storage Type Search

Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh Gupta

Hi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
                i) Need to maintain palletization data in Material master WM view 2.
               ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
              iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
              iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
              i) Not maintined Palletiztaion data in Material master.
             ii) Maintining capacity check in WM View 1.
            iii) Maintained Capacity check in Bin master.
            iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish

WM - Storage type 001 is not suitable as an interim storage area -

Hi,
When i'm doing Migo, the blw error has came, pls advise , how solve it..
seems, some where i made wrong config.. These process i was trying in our ides server..
Storage type 001 is not suitable as an interim storage area
Message no. L9022
Diagnosis
You have attempted to execute a posting to a dynamic coordinate in a storage type for which a putaway strategy is defined. Dynamic coordinates, however, are provided only for storage types without a putaway strategy.

thanks Raman
pls tell me now , where i have to check the config.. and where i may did the mistake.
for ur info, ref to sdn A08- conf guide as per blw , i made the conf..
3.1 Full WM Basic Settings
3.1.1 Defining Control Parameters for Warehouse Number
3.1.2 MM-IM Storage Location <-> Warehouse Number     J01
3.1.3 Defining Storage Type                                              001- high rack system
3.1.4 Defining Storage Section                                            001- Fastmoving
3.1.5 Defining Storage Bin Types                                   P1-BIN HEGIHT 1 MTR
3.1.6 Defining Blocking Reasons                                           1
3.1.7 Defining Storage Bin Structures
3.1.8 Defining Storage Type Indicators                                1
3.1.9 Defining Storage Unit Types                                    E1
3.1.10 Defining Storage Section Indicator                        001- Fastmoving
3.1.11 Defining Bulk Storage Indicator                                      B1
3.2 Strategies
3.2.1 Activating Storage Type Search
3.2.2 Activating Storage Section Search
3.2.3 Activating Storage Bin Type Search
3.2.4 Defining Sort Sequence for Putaways (Cross-line Stock Putaway) Definition of Sort Field in Storage Bin
3.2.5 Defining Strategy for Pallets
3.2.6 Defining Putaway Strategy for Bulk Storage
3.2.7 Defining Strategy for Stringent FIFO
3.2.8 Defining Strategy for Large/Small Quantities Determining Search Sequence
3.3 Activities
3.3.1 Defining Requirement Categories
3.3.2 Defining Shipment Types
3.3.3 Defining Movement Types
3.3.4 Defining Stock Transfer and Replenishment Control Defining Replenishment Control for Storage Type
3.3.5 Setting up 2-Step Picking
3.3.6 Defining Confirmation
3.3.7 Print Control
3.3.8 Defining Default Values
3.3.9 Defining Types for Storage Type
3.3.10 Defining Difference and Document Limit
3.3.11 Clearing Difference (Interface with IM) MM-IM Movement Types for Clearing Inventory
3.3.12 Clearing Difference (Interface with IM)  Do Not Allow Clearing in Storage Types
3.4 Interfaces
3.4.1 Allowed Negative Stocks in Interim Storage Types Allowing Negative Stock for Each Storage Type
3.4.2 Shipping Shipping Control per Warehouse Number
3.4.3 Shipping  Requirement Types of Delivery Documents
3.4.4 2-Step Picking
3.4.5 Creating Automatic Transfer Order
3.5 Manual Activities
3.5.1 Maintaining Number Range and Assignment
3.5.2 Maintaining Number Range for Physical Inventory
3.5.3 Creating Storage Bins
3.5.4 Generating Interim Storage Bin
Edited by: UJ on Mar 4, 2009 7:16 AM

Change in Transfer Order for Storage Type & bin

Hi,
I want to change destination bin change during TO Creation. Steps are given below.
a) SPRO : Storage type setting: Two options are t there in stock placement section
                 Storage bin cannot be changed during confirmation
1     Storage bin can be changed during confirmation
I set it to 1.
b) LT06 : TO Created.
c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
Could you please advice me how to change TO Bins change during confirmation.
Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
Thanks ,
Gupta

Hi Gupta,
In WM customizing - master data - storage type - in the detail data of
the relevant destination storage type you set the flag
'Dst bin ch. during confirm.' from space to 1. Then the destination
storage bin "in general" can be changed at confirmation time.
Additionally you need to setup for the movement types that you are using
that you work with the new confirmation list, see detail of the movement
types, box screen control. (Try changing this setting to '1').
Please also read in the R/3 library - logistics - logistics execution -
warehouse management - warehouse movements - transfer orders - transfer
order confirmation - confirming transfer orders.
Here it is described when the destination bin can't be changed even
with the correct customizing settings.
If you set the indicator for Destination bin change during confirmation
for the desired storage type in Customizing for Warehouse Management
under Logistics Execution -> Warehouse Management -> Master Data ->
Define Storage Type, you will be able to change the destination bin when
confirming a transfer order if, for example, the destination bin
proposed by the system is damaged.
NO destination bin can be entered during confirmation for:
- dynamic coordinates
- return items
- Lean WM (if the destination bin is defined in the movement type)
- posting change TOs
- inventory based on putaway
- additions to existing stock in storage units
- transaction Confirm single item
Please check if your TO is related to one of these cases !!!
Regards,
Mauro

Storage Type Search for Multiple Storage Types

Hello experts.
I have an issue that I cannot seem to resolve.
Background
- We are using kanban strategy 0006 in order to move materials from Plant A to Plant B. Plant A is warehouse-managed but Plant B is not.
- Within Plant A we have one wm-managed Storage Location with many Storage Types.
- Within Plant B we have two Storage Locations ( each one representing a separate, physical building ).
- A majority of the kanban materials in use only have one Supply Area assigned to them. However we have approximately 15 materials that have multiple Supply Areas assigned to them. This is because these materials are common parts across two different Storage Locations in Plant B. As a result, they also have two different Storage Types assigned to them in Plant A ( the source of the material ).
Problem
Because we have common materials in two different Storage Types, the Storage Type Search (defined in OMLY) does not always return the correct Storage Type for the Stock Removal Strategy.
I understand that this occurs because the Storage Type Search is defined based upon the Warehouse Number, Removal/Putaway Indicator and the Storage Strategy. Therefore both Storage Types will use the same Storage Type Search when determining the Destination Storage Type for the transfer order.
FYI, here's an example :
- Material 123ABC is defined in Plant A, Storage Location SL00, Warehouse WH1 with Storage Types ST1 and ST2.
- Material 123ABC is defined in Plant B, Storage Locations SL01 and SL02.
- Material 123ABC has Supply Area SA1 for Storage Location SL01 and Supply Area SA2 for Storage Location SL02 defined for kanban.
- Material 123ABC has Stock Removal Strategy 003 assigned in the WM1 view for Plant A, Storage Location SL00 and Warehouse WH1.
- The Storage Type Search sequence defined for Stock Removal Strategy 003 is Storage Location SL01 then Storage Location SL02.
- When I execute kanban for Material 123ABC for Supply Area SA2, the Destination Storage Type for the transfer order should be ST2. However because the Storage Type Search is based upon the Warehouse (and not the Storage Type level), the Destination Storage Type for the transfer order is ST1 because it is the first item in the Storage Type Search sequence.
So my question : does anybody know how I can resolve this issue? We don't want to adjust our master data for these materials or supply areas. Is there a USER_EXIT that we can implement that will account for this condition?

Hi Mathew,
Based on the storage location indicator you can maintan different storage types for picking and putaway. I think your scnario willl be addressed using this indicator.Please explore this option before going for User exits.

ID Point for Storage Type V.S. Value in Storage Type Search Table.

I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
During creation of Transport Order, the Destinated Storage Type appeared
is 011 (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
I have checked the following configuration:
1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
3. And I found out that using LX03 (Bin Status Report) that there is no
Storage Bin created for the combination of the following
Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
My question
After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

Dear Karthik
You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
Quoted from SAP HELP
Identification point for storage type
Identification point (storage type) of the current storage type.
All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
Please help.
Edited by: Daimos on Nov 4, 2011 3:25 AM

Table for the PO Date and Stock Transfer Order Date of a material no

Hello Everyone!
I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
I am not getting the table through which I can get these two dates for a material.
Please help me out.
Its urgent.

hi,
see these tables:
     EKKO Purchase Order Header Table
     EKPO Purchase Order Item Table
     EKBE PO History table.
reward if its useful

Transfer Order : Data for storage type search is not defined (A )

Similar Messages

Maybe you are looking for