TRansfer Order - Negative stock figures

Dear Friends:
Using T.code LT03, I entered Warehouse no,plant,delivery and pressed enter
In storage, I selected 003(open storage) and selected post
In movement data, I entered the data
source storage type: 003 (open storage)
source storage section - 001 (Total section)
storage bin - 16-03-69 and pressed enter
I get the error ' Storage type 003 does not allow negative stock figures'.
How to overcome the error?Please advise.
Thanks&Regards
MSReddy

You need to activate negative posting allowed indicator at two levels:
1. In the material master, in Plant data / stor 2 you have to tick the indicator Negative stocks allowed in plant
2. In TCode OMJ1 allows negative stock allowed for each plant / storage location.
Regards,
Suraj

Similar Messages

  • How to create a transfer order for stock lying in consignment?

    Hi All,
    I'm stuck creation of Transfer Order. The scenario is for Intercompany Stock Transfer.
    The delivering plant has the requested material as consignment stock only (in a bin in storage type HRC). When the delivering plant attempts to create TO for Outbound Delivery, the error says "System can not find storage bin". When I enter the source storage type and bin, the system says 'Storage type HRC doesn't allow negative stock figure".
    My question is, how to enable the system to search the consignment stock?
    Thanks,
    Rana

    Hi,
    Pl refer OSS note 13006 which says
    It is not possible to transfer vendor consignment stock from one plant to another plant (movement types 301 to 306 for special stock 'K').
    A stock transfer by means of a delivery is also not supported (movement types 641, 643, 647).
    Cause and prerequisites
    This program function is not supported.
    In order to implement this program function, it would be necessary to find a solution to the business-related aspect of the valuation problem:
    Since the consignment price of a material from a vendor can be different in the two plants involved, it would be possible to manipulate the consignment liabilities towards the vendor prior to consignment withdrawals by performing a transfer posting and thus transfering the consignment stock to a suitable plant.
    Solution
    You can post the stock transfer in two steps:
    1. Post the stock issue in the issuing plant using movement type 562 in combination with the special stock indicator 'K', for example.
    2. Post the stock receipt in the receiving plant using movement type 561
    in combination with the special stock indicator 'K', for example.
    Hope this is helpful.
    Regards,
    vijay

  • Create transfer order without stock

    Hi,
    I have a requirement were I need to create transfer orders without stock, can we create this using the user exits (MWMTO005, MWMTO001, MWMTO002). is there anyother way of creating TO without stock by turning off ATP?
    we need this for cross docking, we need a outbound TO so the inbound can be cross docked.

    As I understood ur requirement u need vertual stock to make the delivery (GI) before reciving the good (GR).
    Step 1. create one Stoarge Bin in 999 storage type, called as verstoack(vertual stock) As this storage are used for stock adjustment.
    Step 2 Create TO from storage type 999-verstock to the in you want.
    By this step -ve stock will develop in 999.
    Step 3 when u do the GR, transfer this stock to 999-verstock from the recieved stoarge bins.
    This is to nulify vertual; stock after receive.
    This can be done on weekly basis.
    Note: PGI for delivery will be done after GR only.
    Please let me know if this issue is not resolved

  • Diff between stock transfer order  and stock transport order

    pls any body tell me diff between stock transfer order  and stock transport order .is both are use for same pursose?pls explain

    Check
    very imp stock transfer and stock transport order

  • What r the major differences bet Stock transfer order & STO

    hi friends,
    can anyone explain me the major differences between
    Stock Transfer Order and Stock Transport order,
    with some examples.
    regards
    ganesh

    hi,
    When you do stock trasnfer with the Stock trasport order...then it has the following adavantages:
    Advantages of the Stock Transport Order
    The transfer of stock using a stock transport order has the following advantages over the transfer of stock without a stock transport order:
    ●     A goods receipt can be planned in the receiving plant.
    ●     You can enter a vendor (freight vendor) in the stock transport order.
    ●     Delivery costs can be entered in the stock transport order.
    ●     The stock transfer order is part of MRP: Purchase requisitions that were created in MRP can be converted into stock transport orders.
    ●     The system can run an availability check for the stock transfer.
    Hope it helps..
    Regards
    Priyanka.P

  • User exits for delivery picking confirmation and transfer order creation

    Hi
    We have a scenario for which we need help.
    This is to do with replenishment from plant to plant.
    We have sales sets.
    The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
    we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
    The Tranfer order does not contain the components either.
    However post  the goods issue we  can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
    Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
    After confirmation of the TO then we want the picking status to be put as C.
    Supreeth

    Hi,
    Check the following users exits.
    MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
    MWMRFUP             Customer defined general purpose pushbutton called from scr.
    MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
    MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
    MWMRP003            Customer Exit for Replenishment using RLLNACH1
    MWMRP004            User Exit for Replenishment using RLLNACH4
    MWMTO001            Enhancements for end of transfer order generation
    MWMTO010            Exit: Calculation of Total Planned TO Processing Time
    MWMTO011            Correction of Planned Processing Time for TO Item
    MWMTO012            Correction of Sorting and Split Transfer Order
    MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
    MWMTOAU3            Separate selection of posting changes for autom.TO creation
    MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
    MWMD0001            Transfer order print via RLVSDR40
    MWMD0002            Transfer order print as multiple process with RLKOMM40
    MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
    MWMIDO11            Enhancement for message WMTORD: TO with several items
    MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
    MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
    MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
    Regards,
    Murali

  • TO(Transfer Order) wich FORM is used?

    Hi,
    I need to do some enhancement to standart FORM that is used with TO, transaction LT03 or LT0F.
    But I dont know the name of these transactions LT03 or LT0F, can someone help plz?
    Adibo..:)

    Hi,
      Below are the enhaments available. for tcode  LT03..
    Exit Name           Description                                                                               
    MWM2S001            Exit to Determine 2-Step Picking Characteristic                          
    MWMBAP01            Enhancement for BAPI WarehouseTransOrder.GetDetail                       
    MWMBAP02            Enhancement for BAPI WarehouseStock.GetDetail                            
    MWMD0001            Transfer order print via RLVSDR40                                        
    MWMD0002            Transfer order print as multiple process with RLKOMM40                   
    MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound                   
    MWMIDO11            Enhancement for message WMTORD: TO with several items                    
    MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound                        
    MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)             
    MWMPP001            Enhancement WM/PP Interface (automatic TR generation)                    
    MWMRF001            RF: Influence Display of material description                            
    MWMRF100            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)                       
    MWMRF101            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)                       
    MWMRF102            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)                       
    MWMRF104            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)                       
    MWMRF105            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)                       
    MWMRF106            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)                       
    MWMRF107            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)                       
    MWMRF108            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)                       
    MWMRF151            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)                       
    MWMRF152            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)                       
    MWMRF153            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)                       
    MWMRF170            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)                       
    MWMRF202            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)                       
    MWMRF203            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)                       
    MWMRF204            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)                       
    MWMRF205            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)                       
    MWMRF212            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)                       
    MWMRF213            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)                                                                               
    MWMRF221            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)                       
    MWMRF302            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)                       
    MWMRF303            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)                       
    MWMRF304            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)                       
    MWMRF305            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)                       
    MWMRF312            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)                       
    MWMRF313            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)                       
    MWMRF321            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)                       
    MWMRF400            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)                       
    MWMRF402            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)                       
    MWMRF403            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)                       
    MWMRF404            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)                       
    MWMRF405            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)                       
    MWMRF406            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)                       
    MWMRF410            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)                       
    MWMRF411            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411                        
    MWMRF412            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)                       
    MWMRF502            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)                       
    MWMRF503            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)                       
    MWMRF504            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)                       
    MWMRF505            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)                       
    MWMRF600            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)                       
    MWMRF601            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)                       
    MWMRF630            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)                       
    MWMRF631            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)                       
    MWMRF632            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)                       
    MWMRF633            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)                       
    MWMRF634            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)                       
    MWMRF650            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)                       
    MWMRF651            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)                       
    MWMRF700            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)                       
    MWMRF701            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)                       
    MWMRF702            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)                       
    MWMRF703            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)                       
    MWMRF704            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)                       
    MWMRF705            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)                       
    MWMRF760            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)                       
    MWMRF761            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)                       
    MWMRF762            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)                       
    MWMRF763            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)                       
    MWMRF764            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)                       
    MWMRF765            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)                       
    MWMRF766            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)                       
    MWMRF767            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)                       
    MWMRF768            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)                       
    MWMRF769            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)                       
    MWMRF777            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)                       
    MWMRF800            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)                       
    MWMRF801            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)                       
    MWMRF802            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)                       
    MWMRF803            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)                       
    MWMRF804            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)                       
    MWMRF805            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)                       
    MWMRF806            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)                       
    MWMRF807            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)                       
    MWMRF888            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)                       
    MWMRF889            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)                       
    MWMRF998            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)                       
    MWMRF999            ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)                       
    MWMRFCOD            Enhancement for function codedisabling                                   
    MWMRFDLV            select delivery by user criteria                                         
    MWMRFPRT            Enhancement for printing                                                 
    MWMRFSSG            user exit for sorting TOs in RF system-guided transaction                
    MWMRFUP             Customer defined general purpose pushbutton called from scr.             
    MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection             
    MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.               
    MWMRP003            Customer Exit for Replenishment using RLLNACH1                           
    MWMRP004            User Exit for Replenishment using RLLNACH4                               
    MWMTO001            Enhancements for end of transfer order generation                        
    MWMTO010            Exit: Calculation of Total Planned TO Processing Time                    
    MWMTO011            Correction of Planned Processing Time for TO Item                        
    MWMTO012            Correction of Sorting and Split Transfer Order                           
    MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO                
    MWMTOAU3            Separate selection of posting changes for autom.TO creation              
    MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)              
    Don't forget to reward  if useful...

  • STO & Transfer Orders

    Hi
    Could somebody please tell me what is the difference b/w Stock transport order and Transfer orders. What is the configuration settings needs to be done for both.
    Thanks in advance.
    Naveen

    Hi,
    I think, you are asking about stock transport and stock transfer orders.
    Stock transport order means transfer of goods between two plants of same company code.
    Stock Transfer means transfer of goods between two plants belonging to different company codes.
    In between two plants of same company code, you can do it in 3 scenarios.
    1.simple transfer.
    2.transfer with purchase order without SD delivery.
    3.transfer with purchase order, with SD delivery.. In this case you need to configure the NL( Replenishment Delivery). delivery document with reference to purchase Order.
    For stock transfers between two plants of different company codes
    you need to configure NLCC(Replenishment cross-company code delivery) as well as ZIVU( intercompany billing document)
    Regards
    Sukumar

  • User or SAP exit for Batch Status during Transfer Order creation

    Hi All,
    I would like to know if there's an user-exit or a SAP-exit available with which we could evaluate the status of a batch during the creation of a Transfer Order.
    When a production order is created, the system creates automatically a transfer requirement with all the components needed for the production. This TR (Transfer requirement) is then converted into a TO (transfer order) with transaction LT04. Here, we want to control that the status of the batches is not restricted. Otherwise, the user shall not be able to save the TO.
    Thanks in advance, I appreciate your feedback!
    SS

    Exit Name Description
    MWM2S001 Exit to Determine 2-Step Picking Characteristic
    MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
    MWMBAP02 Enhancement for BAPI WarehouseStock.GetDetail
    MWMD0001 Transfer order print via RLVSDR40
    MWMD0002 Transfer order print as multiple process with RLKOMM40
    MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
    MWMIDO11 Enhancement for message WMTORD: TO with several items
    MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
    MWMIDO13 Extension for WMMBXY (subsequent tasks after goods movement)
    MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
    MWMRF001 RF: Influence Display of material description
    MWMRF100 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
    MWMRF101 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
    MWMRF102 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
    MWMRF104 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
    MWMRF105 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
    MWMRF106 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
    MWMRF107 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
    MWMRF108 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
    MWMRF151 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
    MWMRF152 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
    MWMRF153 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
    MWMRF170 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
    MWMRF202 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
    MWMRF203 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
    MWMRF204 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
    MWMRF205 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)
    MWMRF212 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)
    MWMRF213 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)
    MWMRF221 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)
    MWMRF302 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)
    MWMRF303 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)
    MWMRF304 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)
    MWMRF305 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)
    MWMRF312 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)
    MWMRF313 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)
    MWMRF321 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)
    MWMRF400 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)
    MWMRF402 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)
    MWMRF403 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)
    MWMRF404 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)
    MWMRF405 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)
    MWMRF406 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)
    MWMRF410 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)
    MWMRF411 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411
    MWMRF412 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)
    MWMRF502 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)
    MWMRF503 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)
    MWMRF504 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)
    MWMRF505 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)
    MWMRF600 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)
    MWMRF601 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)
    MWMRF630 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)
    MWMRF631 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)
    MWMRF632 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)
    MWMRF633 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)
    MWMRF634 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)
    MWMRF650 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)
    MWMRF651 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)
    MWMRF700 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
    MWMRF701 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)
    MWMRF702 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
    MWMRF703 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)
    MWMRF704 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)
    MWMRF705 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)
    MWMRF760 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)
    MWMRF761 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)
    MWMRF762 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)
    MWMRF763 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)
    MWMRF764 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)
    MWMRF765 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)
    MWMRF766 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)
    MWMRF767 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)
    MWMRF768 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)
    MWMRF769 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)
    MWMRF777 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)
    MWMRF800 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)
    MWMRF801 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)
    MWMRF802 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)
    MWMRF803 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)
    MWMRF804 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)
    MWMRF805 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)
    MWMRF806 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)
    MWMRF807 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)
    MWMRF888 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)
    MWMRF889 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
    MWMRF998 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)
    MWMRF999 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)
    MWMRFCOD Enhancement for function codedisabling
    MWMRFDLV select delivery by user criteria
    MWMRFPRT Enhancement for printing
    MWMRFSSG user exit for sorting TOs in RF system-guided transaction
    MWMRFUP Customer defined general purpose pushbutton called from scr.
    MWMRP001 Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
    MWMRP002 Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
    MWMRP003 Customer Exit for Replenishment using RLLNACH1
    MWMRP004 User Exit for Replenishment using RLLNACH4
    MWMTO001 Enhancements for end of transfer order generation
    MWMTO010 Exit: Calculation of Total Planned TO Processing Time
    MWMTO011 Correction of Planned Processing Time for TO Item
    Hi,
    MWMTO012 Correction of Sorting and Split Transfer Order
    MWMTO013 Stock Removal for Sev. Storage Types as in Stringent FIFO
    MWMTOAU3 Separate selection of posting changes for autom.TO creation
    MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
    No of Exits: 104
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Regards,
    Raj.

  • Urgent Condition Tab Missing In  Stock Transfer Order

    Hi All ,
                When I a m creating Stock Transfer Order from One Plant In one Company Code to  Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
    How to get the Conditions tab, Do I have to do any Customization ?
    Please suggest me of how to go about .....
    Regards ,
    Sriram.

    Hi Srirama,
    Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
    In that case please proceed with the following configuration.
    This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
    For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
    you must specify the price schema to be used.
    Hope this will solve your problem.
    Regards,
    DilliB

  • Delivery Split in Stock transfer Order

    Hello gurus,
                        In Stock transfer order process, Delivery has been split. In purchase order we have two materials, while creating delivery in VL10B System is splitting the deliveries and creating two delivery no. instead of one delivery. I checked everything but i could not reach out the solution. can you tell me what could be reason for this delivery split in Stock Transfer Order Process.
    Regards
    Soumendu

    SAP have provided a report ZLE_ANALYZE_DELIVERY_SPLIT in note 355404.
    This report tells you exactly what is causing the split by highlighting the cause in red. It does not make any change to the database on your system (i.e. no changes are made on your system). I would recommend you implement this report.
    Often, I have seen the delivery time being the cause of a delivery split. So check the values of LIKP-LFUHR for each delivery. But the above report would tell you exactly.

  • Routing in Stock Transfer Order

    Hi,
    We are having SAP 4.7 & we have activated Transportation Routing process.
    Routing is copied in Sales order & Delivery. But the same is not copied in the stock transfer Order. We are doing following steps.
    We are using Stock Transfer order to transfer the material from One storage location to another storage location. Supplying Plant & Receiving Plant are same in Stock transfer Order. We are entering Receiving STorage location & Shipping point in the STO.
    Is this b'coz of Supplying plant & receing plant are same in the STO ? Or i need to active something els for this.
    Kindly revert back.
    Thanks in advance.
    Samir Bhatt

    Hi,
    this is one of the problems caused by an organisation structure that is not quite matching the "real world".
    In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
    If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
    If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
    So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
    Sorry if this is not much help to you but it should help you to understand why you are having a problem.
    Steve B

  • Error in stock transfer order

    Hi everyone,
    When I am doing MIGO ,In stock transfer order ,I am getting the following error,
    "Excise Invoice cannot be captured for RG1(Finished Goods) material".
    What should I do?
    Regards
    Prabudh

    Hi Prabudh,
    Can you come again with more details ?
    Are you doing STO from Manufacturing plant to selling Plant (Depot) ?
    Regards,
    Gaurav Raghav.

  • Stock Transfer Order Report

    Hi,
         How to develop a Stock Transfer Order report. I also want to track the cost of transfer from one plant to another. Plz help.

    Hi,
    First fetch the data from LTAK header table.   Based on this table you can
    get the line items from LTAP table.  You can have the list of all open TO's in this table.  Based on the Plant (Werks) you can fetch the data from EKPO for STO report.
    Reward if useful.....

  • Open Qty is not copied in Delivery for Stock Transfer Order

    Hi,
    In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
    When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
    In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
    The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
    If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
    Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
    Regards
    Vijay

    Dear Friend,
    If I can understand you clearly.
    to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
    In the Item requirement : Generally it is 202
    reward points if helpful,
    regards,
    Amlan

Maybe you are looking for

  • Error in BW integration in Portal

    Hi  Portal Guru Here I am getting error in BW Integration for Bex Web Application Designer. Portal Communication error. pls tell me the solution for this. helpful answer rewarded with Max Points. Regards sumit

  • Content Search Web Part with Hover Panel - Problem with positioning with css

    Hi guys! I´m having trouble with positioning the hover panel for the Content Search Web Part. I used this article to help me with luck as far as to the positioning. I´ve tried some inline styling but maybe my knowledge in css is no good enough here.

  • HT201210 my i pad is not working ie nothing

    i held down home button and start button to gether but did not start

  • X11 ERROR: Xlib: connection to ":0.0" refused by server

    Hi all, I've problem with X11 on os x 10.6.2. Every time I move my macbook pro from office to home (and viceversa) X11 needs to be quit and restarted otherwise I get the following error: Xlib: connection to ".0" refused by server and X11 won't launch

  • Constantly receiving error message

    Every 30 seconds or so, my phone displace a message that reads, "This accessory is not designed to work with the iPhone. Would you like to turn on airplane mode to reduce audio interference? You will not be able to send or receive calls." Obviously,