Transfer Order Splitting By Picking Area

Hi,
Appreciate some help on this one.
Our system is currently set to split picking transfer orders by storage type -       I'm trying to switch this off.
Instead I would like to split by picking area, so if I have say, picking area 001 across 2 storage types, I would like a pick that goes across these 2 storage types to be created on ONE TO.
I have tried various combinations of sorting and splitting but so far no luck.
It seems that the 'Split Picking Area' check box in     Define Profile > Profile for Transfer Order Splitting    actually refers to the storage type.
If this option is checked, I get 2 TOs, even though my picking area is the same across the 2 storage types I am testing.
If this option is unchecked, I get one TO, even if I set the picking areas to be different. It is almost like the picking area has no influence.
I read something about 'Forced' splitting -     I wonder if there is an option to uncheck 'Split Picking Area'   and then set my sorting in a such a way that I get my desired split??
Any hints or tips gratefully received.
Thanks
Guy

Hi,
"Instead I would like to split by picking area, so if I have say, picking area 001 across 2 storage types, I would like a pick that goes across these 2 storage types to be created on ONE TO."
I would think that you do not have one picking area across 2 storage types. You define picking areas per storage type. So if you give them the same name, that does not mean that they are the same picking areas. So the effect you describe is a split per storage type because they have different picking areas.
Best regards
Juergen

Similar Messages

Create Transfer Order for Consingment Pick up

Hey, is there anyone know how to create transfer order for consignment pick up.
I had tried it using LT06 by using GR material document but it didnt work.
Please i need the answer rather sooner than later.
Thanks

Hello,
Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
Your stock should be maintained in customer consignment and not in interim storage type.
Ideally your process shall flow like this
Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
BR,
Tushar

BAdI needed for transfer order split with the maxi.of 5 item level

Hi,
BAdI needed for transfer order split with the maximum of 5 item level.
If a transfer order contains 12 item level, three separate transfer order should be created with item level 5,5 and 2.
This transfer order is for the material which bound to flow to production from warehouse.
Can anyone explain the step by step procedure to implement this BAdI?
It would be great if the procedure is for New BAdI.
Thanks.

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3430https [original link is broken] [original link is broken] [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

Partial Transfer Order Confirmation on Picking Process

We are on the picking process with a delivery and a tranfer order. Movement type MM/WM 601.
We have a transfer order item line for 10 units.
We would like to confirm 7 units against one handling unit and the other 3 units against a different handling unit.
We are using RF transaction pick&pack LM46.
The problem is that we don´t know how to split the line item in 2 different items within the transfer order.
We don´t want to confirm the TO with differences and create a new TO for the remaining 3 units. We don´t want either to confirm the TO using LT12 because the process has to be done trough standard SAP RF.
Could anyone help, please?

hi kumar
If you feel this answer suits your query. Please reward with points.
Transfer order confirmation based on shippingpoint
answer: no the transfer creation not at all based on shipping points.
The transfer confirmation you have to in lt12 transcton with teh rransfer order number. creation of transfer you can do in lt03 transaction with reference to the delivery frrom you will get transfer order number after that you have to confirm, so please work on that,
I hope this answer solve your query.
Thanks & Regards
Rack29

Transfer Order splitting

We are a consumer goods company that prepacks external handling units in the delivery. This means that we use packing instructions that dictate when the delivery is created what materials go in what shipping cartons.
We have a need to split the transfer orders (pick tickets) by these HU's.
So for instance:
If I have a delivery that has 10 HU's on it (shipping cartons), I need to get 10 TO's when I process that delivery that match the HU's. The picks are not done by HU, we do not use internal HU management - we just use HU to pack the outgoing shipping cartons.
Does anyone know how to do this? I have searched in config and cant figure out how to make the sort / split criteria work to accomplish this.
THANKS!!!
Edited by: Jeffrey Bass on Sep 17, 2008 5:47 PM

Any ideas out there?
THANKS!

TO split per picking area

I have set up production supply to split TOs per picking area. Master data is OK, config is OK.
But it is not working. Is this setting ignored for production supply?
I have even debugged the process and the program finds the correct entry in T312B, with SPLKB field set to X. Yet, nothing happens.
Config was verified by another experienced consultant.
Any ideas?

Read documentation on operation SETIN.

TO Split base on Picking area

Hi Friends,
I have made following configuration setting for Transfer Order split for Picking area
In profile for Transfer Order split, I made Tick mark for TO split for Picking area, Set sort Sequense as 2 and set sort sequnce as Storage tyep and Material and Bin No.
Create Storage Bin Structure with Differnet Picking area and 2 different materials available in Differnet Pick area.
When I creat sale order, Delviery. When I cteate TO, System creating Single TO for Delivery. It is not Spliting 2 TO based on Pick area. what setting need to be done to split TO based on Pick area. Please confirm.
Thanks
Madhavan

Hi,
you should assign Profile for transfer order split in IMG: Warehouse Management>Activities>Transfers>Processing Performance Data / TO Split>Control for Performance Data Processing / Define TO Split-->Performance data control
Andrzej

Splitting Transfer Order

Hello All,
I am doing a very basic pilot and I am stuck with no option available except posting this note here so would appreciate a quick reply. Basically, I am trying split a Transfer order based on the weight limit (without any performance data to worry about nor sorting)
The following is the configuration I have done. Yet, only one TO is created instead of two.
1) Created a Profile for Transfer Order Splitting for a LEAN warehouse (011) with the following options:
- Not selected Split picking area
- Sort profile = 1
- Weight (Limit) = 3 KG
2) Under Sort Profile, I have added warehouse (011) with following option:
- Sort Profile 1
- 1st sort: LGORT
- 2nd sort MATNR
3) In the Control for Performance Data processing / Define TO Split > Message control for planned data, I have made sure:
- Warehouse 011 have partial picking as 3 (partial picking allowed)
- Weight Unit is KG
4) In the Control for Performance Data processing / Define TO Split > Performance data control, I have added a new row with following option
- Added Warehouse - 011
- Added movement type - 601
- added source storage type - 005 (have tried *** as well)
- Added destination storage type - 916 (have tried *** as well)
- Profile to split - (the profile i have)
Moving forward, I create a DN and followed by creating TO. I know movement type and storage type are fine as they are listed in TO still I can't seem to get two TO created.
As mentioned earlier, help would be really appreciated.

Hi,
Please refer the below links...
http://help.sap.com/saphelp_470/helpdata/en/c6/f83df24afa11d182b90000e829fbfe/content.htm
Transfer Order Line item split
Kuber

Split Transfer Orders

Hi,
Is there any way to split transfer orders for serialized and non serialized line items.
Thanks,
Deejay

Dear Deejay,
It is important to understand that, although the term "split" is used here, an
individual item within a transfer order is not split into smaller items, regardless of
the quantity in that item. The items are not changed. Instead, the items within a
single transfer order are distributed (spread out) among two or more transfer orders.
In the Customizing application, you can define whether a transfer order split is to take place and select a mix of detailed criteria that affect the split. A customer exit is also available to define your own criteria for this task. For instructions on how to set up your system for the TO split, see
Activities -> Transfers -> Processing performance data / TO split -> Define profiles in the Warehouse Management IMG documentation.
The following transfer order split capabilities are available.
Split according to movement unit is viewed as a separate function that is processed independently from the other split criteria.
For each movement unit (SUT in an item) a split is planned. The TO contains an item with exactly one movement unit. The split is necessary when the actual data is recorded and plays a role in the calculation of the planned times. Based on the Customizing definition, you can switch off the split function and decide to use the standard process.
Sorting items in the transfer order.
The items in the TO are sequenced so that the document created for the TO lists the storage bins from which materials are to picked in an optimal sort order for processing. The routes are minimized and, consequently, the planned and actual processing times. An additional field in the storage bin defines a sequence for all bins in the warehouse. The customer maintains this field.
Transfer orders can also be split according to the following criteria:
Storage type/section
Planned transfer order processing time
Quantity of containers / weight / volume
Mix (combination of named criteria)
Regards,
Naveen.

Transfer order sorting by bin

I am trying to print TO sorted by bin number and then by material number. I guess I can sort TO output by bin etc only if I am creating TO using multiple processing function. Second option I tried using ""sort profile for TO split" but that didn't work either...may be because I am using split profile but not splitting.
Can anybody throw some light on this...
Thanks!

Hi,
You can maintain this sort profile in WM Customizing under Activities --> Transfers --> Processing Performance Data / TO Split --> Define Profiles' and assign it to a profile for the TO split (refer to note 388828).
Here are the steps:-
1. Create "Sort profile for TO splitting" (this is the place where you defined how TO items should be sorted).
2. Create "Profile for Transfer Order Splitting" and assign sort file created in step 1 to the split profile.
3. Go to "Control for Performance Data Processing / Define TO Split" and select "Performance data control". Assign split profile defined in step 2 to movement types as per your wish.
TO with movement type defined in step 3 should then be sorted according to sort profile defined in step 2 when it is created.
Please also be noted that sort profiles defined in OMLV are only for multiple processing (print of pick lists). During normal transfer order printing, sorting is always made according to TO item as of Release 4.0 (refer to note 556016).

Stock transfer order between 2 plants in same company code

Dear All,
We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
Thanks & Regards
Nitin Chhabra

Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense. The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
Rgds
Richard

Related to transfer order

Hi experts
In the tranfer order creation I need to trigger an IDOC for basic type WMTOID02.
For that I can do 2 things
1. for creating custom output type
2. Search for any exit.
consider on first point.
How we will attach output type in the tranfer order creation(may be transaction LT01)?
what all information that will be passed to output type so that we can fetch all the required information and can create IDOC.?
If suppose exit, in which exit I can trigger IDOC
Thanks in advance.

Akhtar,
Transfer Order Split is related to the configuration setting. It will be under SPRO->LE->WM->Activities->Transfers->Define Performance Data/TO Split. You can check entries in this configuration setting for different movement types and warehouse if it allows splitting transfer order. Are you looking for any custom program to be developed?
cheers,
Sarvesh

Pre-Allocated Stock - Auto Transfer Order

I am looking at implementing a stock allocation process, but it looks to be conflicting with the auto transfer order process that we are using in receiving.
The allocation process is working fine, but as soon as I want to use an auto transfer order creation process, I get a failure message and the TO does not create.
Is there a way to create the TO based on the allocation in the background without any message errors?
Thank-you

can it be that you try to achieve something with this functionality for which this fuction is not designed?
Preallocated stock is an exception to normal business, and the user tells this exception to SAP by maintained the table.
So SAP knows about an exception and can act accordingly and e.g. pick the material directly from receiving area, and does not wait until all stock is putaway.
http://help.sap.com/saphelp_470/helpdata/en/c6/f83fbe4afa11d182b90000e829fbfe/frameset.htm

Unable to do Down Payment request F-47 against Stock transfer order

Dear All,
Business create STO.
in the STO they entered few conditions for expenses.
now Business is trying to do down payment request ( F-47) against Stock transfer order ( STO ).
but they are getting error message
"no invoice expected for item 00001of purchsing doucment ( STO NO )"
pl. guide me on this
Thanks a lot
h shah

Hi,
Using T-code F-47 - Down payment request against raise to possible as follows.
a) Purchase Order Document
b) Production Order
c)PM Order
d)Service Order
e)Process Order
f)Internal Order
Down payment request is not possible against to raise StockTtransfer Order(STO) and display error message.
So, you have to choose the above list only.
Hope, it is useful for you.
Regards,
K.Rajendran

Transfer order print issue

Transfer order label of building A are printed automatically in building B instead of building A. how to check why it is happening, data avaialble is Process order number and transfer order number." what are the steps to select the right printer?

for answer: Printing process order issue
tcode : OMLV

Transfer Order Splitting By Picking Area

Similar Messages

Maybe you are looking for