Transfer orders creating 921 storage errors.

Hi All
When we enter two or more parts at a time to transfer in MB1B its
create transfer order for material in back ground, Also its create 921
errors that need to be fixed in LT10 or the Workcenter trying to
receive the parts as a transfer ends up with work orders that fail and
914 errors that need to be fixed.
kindly guid us how to eliminate the error.
Regards,
Mayank

Hi,
I found the problem. In certain conditions ( if the center is a distribution center - it is determined from table T001W ) the suppliyng storage location is cleared by standard.
Kind regards,
Paulo Sousa

Similar Messages

  • Create transfer order for moving storage units

    Hello guys,
    I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!

    Hello,
    I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore. 
    CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
    In case you need it syncronous use PERFORMING clause together with WAIT UNITL
    Hope this helps!
    Cristian

  • Stock transfer order between two storage locations in IS Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hola.
    Voy a contestar tu pregunta en espanol. Debes crear al centro  emisor  como  deudor  en la transaccion WB02  y ampliar a la organizacion  de compra.
    Posterior, debes crear al centro  receptor como  acreedor en la transaccion  wb02.
    Cesar Moreno. Funcional MM Retail.

  • No transfer order created via VL10A for certain shipping point

    No transfer order created automatically via VL10A for a certain shipping point.
    For Shipping Point E004 the TO is automatically created in VL10A, but for Shipping Point E070 it's not automatically created.
    Could you kindly let me know why TO is not automatically created by Tcd VL10A?

    Automatic TO creation depends the warehouse number or movement type. Can you check the warehouse number for both shipping points?
    Regards,

  • Exit to confirm transfer order with a storage unit number

    hi guys,
    I want to confirm transfer order with a storage unit number  from LT06 transaction, somebody know a user exit? .. actuallly i am using  MWMTO004 (EXIT_SAPLL03A_005)  but it doesn´t confirm the transfer order, How can i solve it? give me suggestions.
    Thanks in advance.
    Marisol.
    Edited by: Marisol on Apr 28, 2010 7:40 PM

    I solved  the problem myself.
    Thanks.

  • Transfer Order : Data for storage type search is not defined (A   )

    Dear Experts ,
    While trying to use the Transfer Order and trying to determine the storage type this error appears :
    Data for storage type search is not defined (A   )
    Message no. L3007
    Diagnosis
    Information on the storage type search has not been defined.
    How ever , I have already configured the search and here is the Storage Type search's data in OMLY
    1. Warehouse number : W10
    2. Operation : A "Stock Removal"
    3. Indicator :   E
    4. Stock Category : Blank
    5. Special Stock Category : Blank
    6. Storage Location Ref :10
    7. Storage Type : 10E
    Please Advice
    Edited by: Sap Sap on Feb 24, 2011 10:54 AM

    Hello,
    The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
    You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
    SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
    In this go to determine search sequence and then
    for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
    I hope this helps.
    BR,
    Tushar

  • Print a "Pull Sheet" or "Pick List" when Transfer Order Created

    How do I automatically print a "Pull Sheet" or "Pick List" upon creating a transfer order?
    Is this the same thing as going into LT31?

    Production Schedulling Profile - WM request are set to TR & TO automatically created on Release
    Goto IMG
    gotot Production >>> shop floor control>> Master data >> define Production scheduling profile.
    We can see screen
    we can define
    in transport
    WM request
    options available
      No creation of transfer requirements on order release
    X  Only creation of transfer requirements on release
    1  Transfer requirement and transfer order on release
    Please tell me if u face any problem
    Sunil Singh

  • Problems when creating a  transfer order for moving storage units

    Hi,
    When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
    is displayed. When i use the FM again after this message then the TO is created correctly.
    When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
    PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
    The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
    Does anyone have a solution for this problem?
    Thx in advance.
    Kind regards,
    John Nijburg

    Hello,
    I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore. 
    CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
    In case you need it syncronous use PERFORMING clause together with WAIT UNITL
    Hope this helps!
    Cristian

  • MD04: no transfer order created.

    Hi Gurus,
    in MD04 i have created a process order. now if i go to the Cor2 in Wm pick list i cannot find the tranfer order.
    what can be the cause?
    thanks
    C.

    Hi,
    If no recipe is read into the order, then there wont be any WM pick list as it wont have the resource details.
    So check why the resource was not read into the order, maybe the validity dates or the lot size etc. If you have not posted any confirmations or goods movement, do a re-read of master data & check if the resource is read into the order, if it gets read, then the WM pick list should be working with the other setups in place.
    Do a detailed check as to why the resource was not read into this order & your query should be resolved.
    Regards,
    Vivek

  • Create Transfer Order for Consingment Pick up

    Hey, is there anyone know how to create transfer order for consignment pick up.
    I had tried it using LT06 by using GR material document but it didnt work.
    Please i need the answer rather sooner than later.
    Thanks

    Hello,
    Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
    Your stock should be maintained  in customer consignment and not in interim storage type.
    Ideally your process shall flow like this
    Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu  Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
    Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
    BR,
    Tushar

  • Not able to create transfer order..

    Hi all,
    When i am trying to create Transfer order,it gives an error"No items that are to be picked were found".
    I have maintained all the settings regarding item categories and delivery item categories.
    i am using Lean ware house management,What I feel is that there is some error in ware house settings.Please suggest..
    Roopak

    hi,
    i think you have 2 or more line item in sales order, the delivery date for one or two item will be in the past,so when you create delivery the item which is in the past delivey date will not get copied to delivery.
    check all item is there in the delivery document,if no check the mising item delivery date, create the delivery based on that delivery data.
    update the thread
    regards
    senya

  • Set Up stock transfer order between storage location

    Hi,
    We are already using Inter company Stock transfer order.
    Now we have found that it is possible to set up Inter company stock transfer order between two storage location.
    Can i have some configuration steps. I have tried it but not working.
    Thanks in Advance
    Samir Bhatt

    HI,
    Create a puchase order ME21N ---> Save
    Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
    Select the Delivery creation line and do the back ground process.
    Start the log display and see the delivery document number by the documents button
    Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
    Billing (Intercompany pricing conditions should be set).
    Regards,
    Chetan.

  • Storage Type change in the transfer order after creation with MDE

    Hello ,
    With the MDE transaction ZMDETSP the transfer between storage locations is done and the transfer order created in the background.
    I would like to know if in standard SAP the modification of the storage type is possible after the TO is created therefore also in MDE.
    I changed the bin with LT1D but impossible for the storage type.
    I know, user exits BUT there must be other solutions, no ?!!
    Thanks in advance for your answer(s),
    Patricia

    You have to do the configuration to change the storage type in TO.
    IMG>LE>WM>Strategies>Activate storage type search , Here you have to give both the storage type.
    Also you need to change the storage type at the time of TO creation not duirn confirmation

  • How to create separate Transfer Orders for different items in a single D/O?

    Hello gurus,
    In my D/O there may are Item A and Item B. I would like to have separate transfer orders created.
    1 T/O for Item A and another T/O for Item B. Currently, I get the message "L3131  No partial picking allowed for delivery documents". System does not allow.
    I have checked D/O Doc Type LF and Item Cat TAN. I don't see any field which allows partial picking (unless I missed it?).
    How / Where can I configure to allow such feature?

    Hello,
    I had exactly same problem, and I found no answer on the web.
    A friend, Anderson Ranéa, Senior WM Consultant, helped me...
    So... you need to set the flag PartialPick at: SPRO/LE/WM/Shipping/Interfaces/Shipping/Define Shipping Control/Shipping Control per Warehouse Number.
    Regards.

  • Automatic creation of transfer orders from goods receipt of purchase order.

    Hi experts
    The project i am currently working on requires the following;
    When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins.  I am aware that the stock goes straight into the 902 area once goods receipted.  Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
    In support of this, i have made an entry in transaction OMKX for the following;
    Reference Movement Type - 101
    Movement Indicator - B (goods movement for purchase order)
    Movement Type - 101
    TR Create Transfer requirement - X
    Immed. TO Creation - A
    Addl Data - X
    Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
    Could someone please help me
    Thanks
    Simon

    Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
    You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

Maybe you are looking for

  • Opening/Closing Balance amounts missing in J_3RFCASH15

    Hello, I am having a problem with the new program for printing cash journal for Russia. When I am executing program J_3RFCASH15 and then select the KO-4 form layout the following data is missing: - Opening Balance amount - Closing Balance amount - Da

  • Translation problem in the portal screen

    Hi Experts, We are facing problem in the portal screen where some texts are displaying in-correct languages. Basically all the text should come in Chinese if we login in Chinese language, but it is coming in English For e.g. In Follow on Documents sc

  • Dynamic Search Help in WDA Table

    Hello Expert, I would like to assign the standard search help for Webdynpro abap table in item level, I know using the below code we can assign the search help for particular input field , DATA lo_nd_info TYPE REF TO if_wd_context_node_info.         

  • ADD NEW CHARACTERISTIC: MAKTX (material text) in Profitability Report_CO-PA

    Hello, I have a CO-PA report (ZINTEGR...), when I run (KE30 tr.), I check the report by the Navigation fields (charact.) Company Code and Product, with drill down of material numbers and text. This text is the "Product Hierarchy" (MARA-PRDHA), field

  • Set Time Automatically without changing time zones?

    Is there a way to choose Set Time Automatically (in Settings/General/Date & Time) and not have Calendar change the times of my appointments when I change time zones?