Transfer playlist files between computers.

I have 60 GB of music on my home PC, and I sync about 18 GB of it to an iPod. I just bought an iPhone. I've been told that it can only sync to a single source computer. Since my work computer is my daily machine which also has my calendar and contacts, I need to transfer a playlist of about 6 GB from my home computer to my work computer. I'd like the source files and the XML about those files (eg, song ratings) to transfer also. How? My current plan is to copy files one by one.

Yes, that should work fine.
itunes seems to sync in two groups. Media as in music, video, pod-casts and photos, then data which is everything in the info tab (i.e. contacts and calendars).
As Nathan stated you can sync media from only one computer at a time.
Then data as in contacts and calendars from another computer.
If you sync contacts and calendars from more than one computer, itunes will try to merge the data, so in the end you end up with both computer having exactly the same data.
Hope this helps.

Similar Messages

  • Suddenly slow transfer of files between computers over LAN

    All, I have the following: HP Desktop, XP Pro, SP3, with Maxtor external HD Dell Laptop, VISTA Business, SP2 Both 32 bit Both running Norton Internet Security 2011, including firewall Linksys WRT54GL router V1.1, connected to DSL The external HD is configured to share over the network. I use it to move files between the twp computers, and to access the Internet. It has been working fine for about 3 years. Everything is still working, except that the speed of transfer, either direction, between the laptop and the external HD has dropped to nearly zero. Files that used to take a minute or so to transfer now literally take hours, and depending on the software, may time out. The problem is not so much the speed over the network, but that the data is only sent in short bursts, with long, many seconds, delays between. As the file progresses, the process gets worse. Typically, it takes as long to send the last 10 % as the first 90%. In the past, the data was sent in a continuous stream. The access between the laptop and the Internet is still fine. I am in a rural area, and have verified that there is no other WiFi to interfere. Using my backup program, I have rolled both my computers back to a time when everything was working. The problem still exists. That seems to point to the router. I have flashed the most recent firmware and reconfigured, but not help. Google turns up lots of hits, but nothing that fits this. Any suggestions on what to do next? For now, I am just swapping the USB drive physically. Alan

    Try to reset the router and reconfigure it.
    Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
    Change the MTU size to 1365. Save the settings.
    Go to Wireless tab and click on Advanced wireless settings. Change the Beacon Interval to 75, RTS and fragmentation threshold to 2304. Save the settings. Power cycle the router and see if that helps you.
    Disable or turn OFF the firewall or Anti-virus software on your computer.

  • How do I drag and drop files between computers when using Home Sharing in ITunes?

    How can I drag music files between computers while using Home Sharing? An older version of ITunes had a Home Sharing icon in the column browser near the playlist so it was easy to drag and drop.

    Hello cacalenni,
    Thanks for using the Apple Support Communities. I understand that you wish to learn how to import songs using Home Sharing in the new iTunes. The following resource should assist you in doing so:
    iTunes 12 for Mac: Use Home Sharing to import items from another iTunes library
    http://support.apple.com/kb/PH19614
    Cheers,
    Matt M.

  • How do I share files between computers (mac's) on the same wireless network?

    How do I share files between computers (mac's) on the same wireless network?

    Turn on File Sharing in System Preferences - Sharing, then you should be able to see them in the other Macs' Finder sidebars (under Shared). Click on them, click Connect As, and log in with the user credentials you're sharing from.
    Matt

  • How to share files between computers and TC

    What is the best way to share content/files between computers (iMac and MacBook Pro)?
    I thought about using Time Capsule for this...is this NOT wise?
    Thanks

    What is the best way to share content/files between computers (iMac and MacBook Pro)?
    The simplest way to do this would be to enable File Sharing on both Macs.
    On each Mac....
    Open System Preferences (gear icon on the dock)
    Open Sharing
    Enter a check mark next to File Sharing
    Now when you open the Finder or Macintosh HD, you will see the "other" Mac and you will be able to access files/folders, etc. on the other computer.
    I thought about using Time Capsule for this...is this NOT wise?
    The Time Capsule was designed to work with the Time Machine application to back up your Mac(s). As such, the TC will make a complete copy of each Mac on the first backup and backup any changes after that to keep a complete timeline of each Macs files. Each computer normally will only be able to access the backups for that given computer.
    While it is possible to store normal files or folders on the Time Capsule disk, this is not generally recommended as there will eventually be a struggle between Time Machine and the files on the disk as the drive begins to fill up. The other thing to keep in mind is that access to the drive for "normal" files will be quite slow.

  • Transporting iweb files between computers

    Hi!
    Does anybody know how to transport iweb files between computers? If I have a site that I want to put on another computer without deleting the sites on that computer. What do I do? I have discovered that i can make many copies the Domain file that I have found in the Library/Applications Support/iWeb folder. Is this the only way?
    Thanks!
    /Chris

    All you need to do is copy the Domain.sites2 file that's in your User/Library/Application Support/iWeb folder to the same folder on the other computer.
    If you plan to manage the site from both computers then this MacWorld article will be of interest: Managing an iWeb site from multiple Macs.
    OT

  • I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?

    I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?
    Many thanks for any advice.
    David

    You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

  • Can you transfer specified files between an imac & laptop

    http://ChucF  Can You transfer specified files between a laptop & an imac?

    Sure.
    There are several possibilities.
    You can connect the 2 with FW and start one as Target (keep T pressed during boot). You will see the second Mac as external HD and do the transfer with Finder.
    Or you can connect the 2 on the same net with Gigabit Cable or WiFi and again use Finder.
    If you need more control in transfer I found Tri-Backup usefull (www.tri-edre.com)

  • Transfer of files between g5 and mac book pro

    how can i transfer files between 2 computers with a firewire cable.
    i can transfer the files with my network (ethernet and wlan), but i think fire wire 800

    You don't say what your other Mac is. If it's Power PC, you can't do it. What ever you use it's got to be compatible with your system.
    Assuming that's so...
    Connect your FireWire cable between the two Macs. On the other Mac, go to System Preferences > Sharing > Services tab> enable Personal File Sharing.
    On your Mac, go to System Preferences > Network > from the Show pop-up menu > Built-in FireWire > Configure IPv4 > DHCP and click" Apply Now".You'll bet a self-assigned IP address (If not go to "Advanced" > RenewDHCP Lease).
    In the Finder from your Go menu > Network. You should see the other Mac. Click its icon > press "Connect button. Enter the user name and password for the other Mac (that Mac’s Admin name and password) > click Connect > choosethe Mac’s hard drive and click OK. The other Mac’s hard drive will mount on your Desktop.
    -mj

  • Moving files between computers

    Hello, friends, can anyone plz advice me how best to move a file from one Mac to another? I thinkin there must be some kind of cable I could purchase for this. I want to move a one hour IMovie 6 movie to a larger Mac to burn on IDVD. After 20 continous hours of attempting to burn it on my smaller Mac, I gave up the ship and force quit IDVD. The small Mac Book 2.1 say I have 14 gb available in IMovie for this job whereas the larger, newer Mac has 115 gb! This must be the best way to go!?
    Thanks a ton and a half!
    chadcherty

    It's actually very easy, all you need is a single FireWire cable. Here are the instructions right from the Mac's Help menu:
    Transferring files between two computers using FireWire
    You can use FireWire to connect your computer to another Mac and have one of the computers appear as an external hard disk on the other computer. This is sometimes called Target Disk Mode.
    To transfer files using FireWire:
    Shut down the first computer and leave the second computer on.
    Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
    Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.) A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
    When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
    Push the power button on the first computer to shut it down and disconnect the FireWire cable.
    If the computer to which you connect your computer is running Mac OS 9, it must have FireWire version 2.3.3 or later installed. Use Apple System Profiler (located in /Applications/Utilities) to check the version of FireWire installed. If it has an older version, get an update at the Apple FireWire website at www.apple.com/firewire.

  • Best way to share files between computers?

    Hi,
    I have a MBP & a G5 and I am doing video editing with FCP & web-designing with
    Dreamweaver on both of the computers. The problem is that I have been using
    the two computers completely separate.
    For example, if I create a project on my laptop, I can't go to my desktop and continue it
    unless I copy the files to a zip drive (or something similar) and manually transfer the files.
    And then I don't know which files are actually up to date.
    Is there any simple way that I can have the two computers produce, access & share files easier?
    I do have a .mac account but I don't know much about it's capabilities?
    I could really use some help and advise here.
    Thanx,
    Todd

    Hi,
    I had the exact same question/ problem a couple of days ago. I think in your case, working with large video files, .mac might not be an option.
    I would say you either work of an external drive (maybe connected as a shared drive wirelessly) as it was suggested to me, or you use a file sync utility like ChronoSync to keep both machines mirrored.
    Hope this helps.

  • Project Files Between Computers

    How do you switch final cut projects between computers? I have FCP 5 on both computers and I take the project file copy it onto a hard drive along with the captured material-capture scratch-and I get an Error 41 message and the project doesn't load.
    Please help.

    Run software updates on both systems. Each Final Cut application must be the same version.

  • How to transfer playlist files to USB disk

    Okay, so I have a nice playlist full of 8 GB of music, now I want to transfer those files (in no particular order) onto my mini USB thumb drive to use in my car. What is the best way to do this in an organized way? I was thinking of right clicking on every album and "reveal in finder", then manually transfer that album's folder to keep it all organized in the USB drive. I'm trying to setup a few USB drives to function like an old multi-CD changer would. Any better ways before I waste some time?
    Thanks!

    Thanks for the response Limmos. I tried this, but unfortunately all the files go into a single directory, so there is no folder organization anymore, so I loose all my album searching options in the car (requires folders).
    I thought about this last night and I had an idea. I'm thinking of copying all the files to the drive as you described above, then restarting itunes with the option key held down, forcing it to create a new library, adding all the files with are now on the drive to the new blank library, and then run the Library> organize library. Would that work?

  • How do you sync files between computers

    I want to sync files between Macbook Pro (2011) and IMac. File structure for Pictures needs to be Identical, not sure what is best method. Do not want to try until I have a good plan.
    Ashleyriverman

    Hello AshleyRiverman,
    It sounds like you have a directory of folders that contain photos in a specific organization that you want to copy to another computer. You can enable File Sharing to be able to access the photos from one computer on another, and even allow the viewing computer to be able to add photos or delete them, thereby keeping them the same across both computers. This article will help you get that set up and configure the permissions for it:
    OS X Mountain Lion: Share your files
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Transfering files between computers

    I have just ordered an iMac G5 1.9 ghz 17" computer and need to transfer my files from my eMac 700 to the new iMac G5. I also ordered a firewire male to male cable for the transfer. Any suggestions for how to do it so that, other than system software, all my programs and data will be duplicated? I have Drive Genius 1.1.5 and also use SuperDuper for my backups.
    eMac 700   Mac OS X (10.3.9)  
    eMac 700   Mac OS X (10.3.9)  

    Welcome to Apple Discussions!
    Since you are backed up, you can use the Migration Assistant on the new machine:
    http://docs.info.apple.com/article.html?artnum=25773
    when hooked up to the old machine with the Firewire cable you mentioned.

Maybe you are looking for