Transfer PO from SRM to R/3 - Error in Process

Hi,
I have a big problem witch ONE PO in SRM.
We are working in SRM, extended classic scenario.
I have ONE PO which I can't get to our R/3 system. The error message SRM respont with is: 'Net price must be greater than 0'. I have been looking into the order, and there is definitely no wrong data in the order regarding the price, or other data?
Br. Kim

Hi
Please through this ->
Seems to some OSS Note is missing in either you R/3 backend or the SRM system ->
Note 841021 - Manual price entered disappears - error 06 218
Note 932236 - BAPI_PO_CREATE1: Purchase order price unit not transferred
Note 580225 - Purchasing BAPIs: Conditions and pricing
Note 853970 - BAPI_PO_CREATE1: Net price is not transferred
Note 571860 - BAPI_PO_CREATE1: Price is not transferred
Note 487605 - ME21N: 06 218 'Net price must be greater than 0'.
Refer to these link as well for details.
Problem with BAPI_PO_CREATE1
PO created with status : Transfer Failed (E.Sys.)
Problem with BAPI_PO_CREATE1
Re: Error in pricing when doing sourcing in EBP 4.0
Re: STO classic scenario SRM 4.0
Hope this will help.
Regards
- Atul

Similar Messages

Transfer 'Title (from SRM Org) of the approver' to PR

Hi Gurus
SRM 5.0 , Classic, always create PR
How do I transfer 'Title (from SRM Org , e.g Manager, Director etc ) of the approver' to PR ?
-Pranav

Hi Disha,
Thanks.
Step 1) PPOSA_BBP
Step 2) Go to any Org.
Step 3) Double click on any Position
Step 4) Go to 'Basic Data' of Position TAB
Step 5) Go to Description of the Position (e.g PRODUCT MANAGER )
I want to transfer "PRODUCT MANAGER" to the PR
-Pranav

How to transfer Vendor from SRM to SAP R/3

Hi...
How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system
regds
Kumar

Hello Kumar,
Please find the SAP documentation:
http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
I have not tested the functionality but as per documentation Under Business Partner Monitor transaction, you can synchronize SRM vendors with ECC vendors directly using a pushbutton Transfer Change to Backend.
Other useful threads.
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor data transfer from SRM to R/3.
Hope this helps.
Thanks
Ashutosh

Transfer attachment from SRM SHC to ECC PO

Hi,
Im working on SRM 7.0.Classic scenario.I need to enable the transfer of attachments from SRM SC to R/3 PO.Can anyone explain the steps to achieve the above?
Also in case of extended classic scenario,is the attachment transferred automatically from the SRM Local PO to ECC PO?
Thanks!
regards,
SRM Tech

Hello SRMTECH,
You have to do some configuration settings in SPRO
SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Define Settings for Attachments.
We are also working for the same requirement. We have did following configuration / customization to achieve this.
- Activated BADI "BBP_CREATE_BE_RQ_NEW" in SRM and set the indicator as follow:
cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
- In ECC Side T.code DC10 and defined document type for SRM with following
Add a New Document Type SRM (if not already exists). Set 'Use KPro', 'Version Assign' and 'Change
Docs'. Set the Internal and External Number Range (02 and 01). Use MCDOKZNR as Number Exit.
Ver No. Incr = 1 and Set the File Size (Usually 10000000 bytes).
Once the Document Type is created, define Object links to PO Item and Pur Req Item. Use - Screen
Number 247 and Screen Number 248 with Valuation Object of EBAN and EKPO for Objects EBAN
(PReq) and EKPO (PO) for Doc Type SRM.
After doing this changes we were able to transfer attachements but we are still facing one issue as we were not able to open that particular document in ECC / R3.
See related threads for more pointers:
Attachment transfer issue from Shopping cart to Purchase req in ECC
Re: How to check the attachment in ME53N
Re: Sending attachments from SRM to SAP Purchase Requisition
Re: Attachments with follow-on documents.
Arshad

PI Development to Transfer PO from SRM to Suppliers through PI 7.1

Hi,
PI Development Question:
I have requirement to Transfer PO Document(XML) from SRM 7.0 to PI and PI to Suppliers in cXML format. In PI , SLD I have created Technical and Business System for SRM System. I am planning to use HTTP adapter in cXML format to Suppliers. I have URL from Supllier Where to Post this PO Document. But When I am trying to Configure in SLD for Suppliers( As Third Party Systems) its asking System Name and Host Name.
Do I need to request Suppliers for Hostname and System name too regarding their system?
For each supplier do I need to create a seperate Technical and Business System? If yes, When PO sent from SRM, based on Supplier on PO How to identify for whom I need to sent the PO(Purchase Order).?
What is the complete process from SRM->PI -> Suppliers? If you have any steps or documentation for this please let me know.
Thanks for your help!
Thanks,
Monica

Hi Monica,
Create one business system for SRM and for cXML suppliers. Use them for all the suppliers. For SRM you can assign the technical system giving the techincal details for SRM and for all suppliers you can create busniess system something like Sys_DCorpcXML where D is for development and for Quaity you can give Q and P for production (you can cahnge according to your naming standards). Now assign the role as application system and the corresponding xi as integration server.
> Do I need to request Suppliers for Hostname and System name too regarding their system?
No need to ask them
> ( As Third Party Systems) its asking System Name and Host Name
Specify as I mentioned above
> For each supplier do I need to create a seperate Technical and Business System?
Use teh same business system for all the suppliers
> how to identify for whom I need to sent the PO(Purchase Order).?
Configure and route them in receiver determination based upon supplier no. etc.
Regards,
---Satish

SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

BBP_PO_INBOUND_BADI:Transfer value from SRM to ECC PO custom field

Hello, everyone
Our SRM version is 7.13 with classic scenario, ECC version is 6.17. transferring quotation data to ECC for creating PO by PI.
I created a custom field such as Z1 for PO in ECC , I need transfer someone value from SRM to Z1 when press 'create PO' in quotation,
So I have to use BADI:BBP_PO_INBOUND_BADI in ECC before PO generating, but I found the breakpoint can not reach this BADI, Why ? how should I do?
I used to apply normally this BADI in SRM7.02 and ECC6.05 without PI with extend classic scenario.
Thanks very much
Jesse.

Hi Jesse,
I think the BBP_PO_INBOUND_BADI is used to enhance the data when the PO is sent via BAPI.
Please check the PI interface name that you are using and find out the Proxy name (in Tcode: SPROXY) and find an Enhancement spot (either in SRM or in ECC).
Regards
Venkat

Item will not transfer to/ from external drive "in use" error.

I have searched the boards and found a handful of suggestions that I have tried with very limited success. My assumption is that is is a drive issue rather than a mac issue (Enlighten me if I am not posting in the right place!)
I'd like to be able to avoid deleting the files and reformatting as I'd have a very tough time reloading the information seeing that I can't copy directly from that disk and the backup is in a different physical location (about 3 time zones away). Please let me know if there is something that can be done to find what the "hang up" is on this disk and pinpoint the error rather than having to start from scratch. Here is a more detailed background:
Computer - Mac Mini running 10.6.8 (I have tried on two separate machines of the same model and OS as well as on a Mac Pro also running 10.6.8 with the same results)
What I am trying to do: Copy several folders woth of .mov and .avi files of varying size (files are up to about 9GB but most are around 100MB) over firewire 800 from a 1TB LaCie Rugged to a 4TB G-Raid. (I have tried copying whole folders as well as individual files).
The Issue: In the middle of a large transfer of multiple files nested in a folder I got an error message saying that the file could not be copied because it was "in use." I tried again and got the error again, I then tried moving individual folders and started getting the error even earlier in the transfer.
What I have tried: Restarted, tried on multiple systems, and verified and repaired the questionable disk (even though no errors were being reported).
I then remembered a time when I had a similar issue that turned out to be a Quicklook Bug so I terminated Quicklookhelper in my processes and restarted (no luck) I changed my view settings in Finder to not have a preview (no luck).
I took the advice of another board and trashed com.apple.QuickLookDaemon and com.apple.QuickLookDaemon.plist and restarted (no luck).
I then tried verifying the disk again and it did come up with an error though it claimed to successfully repair it. (I will post the report from disk utility at the end for anyone that thinks it might be helpful)
At this point I was able to transfer one file of 4+GB to the other disk. Then when I went to go to the next file I started getting the same error. I went throught the above "trash and repair" process that worked before but saw no results this time.
I also noticed that I could not "trash"com.apple.QuickLookDaemon and com.apple.QuickLookDaemon.plist while the faulty drive was mounted as it was coming up as "in use" as well.
Any suggestions? I'd love you forever.
(Here is the report from Disk Utility: Yes, the faulty drive is called "Baby Mama")
Verifying volume “BABY MAMA”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Unused node is not erased (node = 29880)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 280)
Checking volume bitmap.
Volume bitmap needs minor repair for under-allocation
Checking volume information.
Volume header needs minor repair
The volume BABY MAMA was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “BABY MAMA”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 416)
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume BABY MAMA was repaired successfully.
Volume repair complete.Updating boot support partitions for the volume as required.

Console isn't reporting anything other than "aborted" whenever it fails to transfer.
For a minute the drive seemed to fail entirely, but then is able to be repaied in disk Utility (after 2 tries).
It also ocassionally won't unmount because the drive too is "in use" (despite the fact that this would be impossible as no other programs are running after I restart.
I got 2 small files to transfer in Safe Mode, but then I was back to the same errors.
Time Machine isn't running and I added the drive to the Privacy Pane. So far I'm still having a hang up with this thing.
All good suggestions though. I appreciate it.
I wonder what the process is that is holding it up!?! Is the "node" error I keep seeing some sort of clue? I can't find much about it.

Transfer text from SRM SC to Purchase requisition

Hello all ,
I want to transfer SC item text to purchase requisition's item text. Is there any BADI to achieve this task ?
Thanks,
SM.

Hi,
In the standard,the SC item text is mapped to the item text in PR which is created in the R/3 backend.However if the transfer of text is not happening,you can implement the logic for trasnferring the SC item text to PR item text in the badi BBP_CREATE_REQ_BACK which contains the method FILL_REQ_INTERFACE.
BR,
Disha.
Do reward points for useful answers.

Cannot Transfer Songs From Library To My IPOD-Error message

I recently have been having issues with my ipod updating, so I restored it about a million times until it finally started recognizing it in my Itunes. The problem is when I am transferring songs onto Ipod it is terribly slow and finally gives me an error stating "The disk cannot be read or written too", what the **** does that mean? So I removed my itunes and reinstalled it this was working grate till I got about 600 songs on and then it began having the same issues, I dont know if I showed just try and reinstall my itunes again or what?

Welcome to Apple Discussions!
See this...
Disk Cannot Be Read or Written to error when syncing iPod
btabz

PO Output is possible for SRM PO's in status Error in Process

Hello All ,
We have a requirement, where system should not process the PO output when the PO is in u201Cerror in transfer status u201C .
While creating the PO -> If the SRM PO is in Error in Process status, output will be processed and its sent to vendor also.
Since Error in Process status in business point of view consider as error free PO but fails to transfer the PO to back-end due to some technical or customization.
While changing the PO -> if the SRM PO is in Error in Process, We can stop the process the output with the help of OSS Note 1324180 which has been already implemented.
Can anybody tell me how can we achieve this . Any pointers. We have also tried with condition based output workflow start conditions also .but it couldnu2019t work .
Thank you
Bharathi

Dear Expert,
Please check in RZ20 what specific error is being shown and accordingly either error message can be changed to warning message or customization should be done so as to replicate the PO into backend.
Thanks and Regards,
Sathya Kumar.

How do you transfer music from ipod to ipad?

how do you transfer music from ipod to ipad?

The Sync process is via iTunes.
See here > http://support.apple.com/kb/HT1386

PO status in " error In Process ".

Hi Experts,
We have some POs that are stuck in SRM with status as " Error in Process ".
The PO is got replicated to R/3.
The Workflow Log is Completed.
But in Follow-on Documents the status shows as " Error in Process ".
Can you pl. guide me int his issue.
Thanks & Regards
Sachin

Hi,
We have the same type of problem in creating invoices for our SRM 5.0 decoupled scenario.
The invoice is created and not shows any error and gives a completed message. But if we see follow-on documents it says as "Invoice -
Error in Process"
Do anybody has the same prob. solved.
Kindly suggest from gurus.
Sincerely,
Sridhar.
Message was edited by:
P.T. Sridharbabu

Error message when calling a Business Connector RFC destination from SRM

Hello all,
We are facing one problem with data Purchase Order transmission between SRM 5.0 (SRM_SERVER 5.5, extended classic scenario) and Business Connector 4.7.
We made needed customizing in order to have "XML / XI" output medium available in tab 'Company Data' in "Manage Business Partners" web transaction (by updating BBP_USE_AI table in SM30 transaction).
Then, we implemented BAdI definition BBP_EBPXML_OUT_BADI with method PURCHASEORDER in order to change XI system type to Business Connector.
In this way, PO transfer data between SRM and BC is done using BC Module Function BAPI_POEC_XML_SEND (TCP/IP RFC connection was defined for Purchase Order in BBPC_RFCDEST table).
Nevertheless, even if method BBP_PO_SEND_XML is correctly triggered when PO is created with a vendor with XML output medium, we have in the document output log ("Process Purchase Order" web transaction) an error message:
' Error (Unknown Partner and Message Type. Routing Rule created. Sender: SMR Receiver:) when calling RFC destination BC '
where SRM is the SRM log. sys. and BC the Business Connector log. sys.
Our EAI team is working on it, but if you have any idea, your are welcome !
Thank you in advance.
Regards.
Laurent

Hello Christian,
Thank you for your help. However, we abandoned this solution between SRM and Business Connector.
So, we followed instructions indicated in OSS note 883693 - "ECS: PO output determination in R/3".
Nevertheless, in order to restrict this behaviour for specific vendors and purchasing organizations, we added some filters.
It is working fine.
However, when the PO is modified in SRM, then order again, PO is modified in R/3 (by the RFC user from SRM) more than once.
As a consequence, we have as much messages as modifications of the order in R/3 (due to multiple RFC access with the SRM RFC user).
Does anybody have an idea to have only one R/3 output message when the PO is modified in SRM ?
One solution could be to check in the NAST table if the time creation of the last output message is lower than, for example, one minute.
If it is the case, we do not allow R/3 ouput message.
Any suggestions is welcome.
Regards.
Laurent.

Attachment transfer of PO from SRM to Back end for extended classic scenario

Hi Experts,
We are using the SRM 7.0 with EHP 701 and ECC 6 , we have a SRM requirement where we need to transfer the attachment of a PO to back end ECC. I tried to implement the note 1594966 , but it doesn't work . we are using Extended classic scenario. Please suggest some SAP notes or the procedure to be followed to achieve this.
Thanks ,
Aishwarya.M

As far as I am aware this functionality of transferring attachment is not supported in Ext classic scneario
http://scn.sap.com/thread/1873708
Also I suggest you should debug and see if its sending attachment from SRM if yes then
could be something missing at ECC side , To debug use this
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=340264144
You may also check in SXI_monitor and see if attachment is being recieved and sent from SRM and ECC respectively
Are you configuring this for the 1 st time or its an error which u encountered?
You must raise a NOte to SAP for the same till a solution is found .
This one is another which you can check ..
http://wiki.scn.sap.com/wiki/display/SRM/Transfering+shopping+cart+attachments+to+the+backend+system

Transfer PO from SRM to R/3 - Error in Process

Similar Messages

Maybe you are looking for