Transfer PO number to SO

Hi,
How to transfer PO number to SO in the recording automatically.
thanks,
sekhar.

Hi do like this,
After doing recording 
Come to the screen Transaction recorder
In that one
Delete the entries in the field
MEPO_TOPLINE-ebeln
this one will transfer the value from PO to SO
Thanks & Regards,
       Prasad.

Similar Messages

  • Can I buy out my contract to transfer phone number to company account?

    Hello,
    Currently I have a droid phone under contract with Verizon, and I am eligible for an upgrade in June, 2015, but can buy out of the contract for $180.  I also am going to get a company phone for my job, but it is required that this be the iphone 6 and it can be either with Verizon or AT&T service.  Ideally I would like to just transfer my number to my company account and use the iphone full time, but unfortunately it's not that simple.
    Here are the options I've been informed I have:
    1) Have the company take over my account for no cost, but the company would have to pay $649 for a new iphone since I'm not eligible for an upgrade, and I'm not sure I can get this added cost approved.
    2) Get a separate company phone number and iphone that the company will buy for me (I think it will cost them $200).  Not ideal because I would either lose my phone number or I would have to keep paying for my phone and carry 2 phones around.
    Here's the option I want, but nobody can confirm it is possible:
    3) I buy out my old contract for $180, then transfer the phone number to my company phone where I would get a new contract and a new iphone.  I'd be fine paying the $180 out of my pocket since I'd make that up in savings in 3 months.  I was on hold with customer service while 2 service people were debating whether or not this was possible, but after 15 minutes of dead air I had to leave to attend a work meeting, so I don't know if it's possible.
    Here's the option I don't want to but may be forced to do:
    4) Start a new contract with AT&T through my company and have my number ported over.  I would then pay the $180 to Verizon to get me out of my obligation.
    In case anyone has actually taken the time to read all this, here are my questions:
    - Is Option #3 actually possible?  Has anyone done it?
    - Is Option #4 possible?  If it is possible, wouldn't Verizon just prefer I do option #3.
    - Are there any other options I'm not considering?
    Thanks for any input you can give

    Hello Kinquana,
    Yes, I'm available for Early Edge upgrade, but from what I can tell it doesn't really offer my company any savings versus them just buying the iphone up front at full price, and it probably just creates complications for the IT department.  Either way, it's an additional cost that I would have to get approved.
    So it sounds like my best option is to just move my number to AT&T and cancel my verizon account?  Seems like you would not want that to happen.
    I do not have any issues with my current phone, but my company requires that I get an iphone due to compatibility with email and security.
    Thanks for the quick response

  • HT201269 How do I transfer mobile number from iPhone 3Gs to iPhone 5?

    How do I transfer mobile number from iPhone 3Gs to iPhone 5?

    and then you ask your carrier to transfer the number to the new sim which is different form factor

  • DRQ:Credit Note not based on invoice should transfer reference number to JE

    according to SAP business one system behavior, only those credit notes that based on invoices are able to transfer customer/vendor reference no. field value to reference 2 field in journal entry. I would like to propose to enable AP credit note that is not based on invoice to transfer reference number field to JE as well.

    Even if it is possible, you would be better split the amount to individual credit note.  I have no idea why you need to split line in one credit note.
    Thanks,
    Gordon

  • Transfer Order number for Production order

    Hi,
    what is the best way to get the transfer order number (LTAK-TANUM) for picking for a production order?
    Picking can occur first in IM (via MB1A for example) or in WM (via LP10). Requirement Tracking Number cannot be used as it has only a length of 10 characters (production order number up to 12 characters).
    Reservation number (LTAK-RSNUM) is only filled in case picking is done from IM first.
    Cheers
    Mathias

    Hi,
    how are other companies handling this if they want to pick from the warehouse (e.g. using CO27) for a production order and the production order number has 12 characters? The bin (LTAP-VLPLA) and the requirement number (LTAK-BENUM) only have up to 10 characters.
    Is there a standard way in SAP to print out the complete 12 character number on the picking list? I could not find another field where the production order number appears.
    P.S. There are already some production order types in use that have a number range with 12 characters.
    Cheers
    Mathias

  • Transfer Order number in MSEG table

    Hi,
    I am a Technical team member and while preparing Technical Specification for a Report I came accross a problem that when we do a PGI the Transfer Order field in the table MSEG does not get updated.
    My requirement is to get the Transfer Order number from the Material document, and I don't understand why this field isn't getting updated in MSEG table with reference Transfer order when one does a PGI.
    Please let me know if there is any configuration I need to check with so that I can go with this info to my Functional team.
    Appreciate your help in this regard.
    Thanks and Regards,
    Saleem.

    Hi Saleem
    In MSEG you can find TR number (MSEG-TBNUM). Take MBLNR from MSEG and pass into LTAK table. There you can find TO Number (LTAK-TANUM)
    Hope it helps
    regards
    Srinivas
    reward if it is useful

  • Can I just transfer my number?

    I've wanted an iPhone since before I even had my iPod Touch, but I don't want to pay for a data plan. I'm not going to use it-I'll use wifi whenever I need internet if I can connect.  I know Verizon Wireless wont sell one to you without upgrading your plan, but what if I get it somewhere besides the Verizon store?
    So, my question is: If buy an iPhone from Amazon or where ever, can I simply transfer my number from my current cellphone (Samsung Bright-side on Verizon) over to an iPhone without a data plan? Will that work? Will it not work until I do get a plan or something?

    When you attempt to activate the phone on Verizon, they will see it is an iPhone and will require you to add a data plan. No way around it.

  • Moving can I transfer my number

    I'm moving soon.  My current number is being used for my consulting business.  The new location is in a different area code so I know I can't transfer the number, but I was wondering if I can continue to pay for the current number and have any calls to it forwarded to my new number. 
    I think I could do this in a round about way if I were to sign up and transfer this number to vonage, but was wondering if Verizon could offer the same service.

    Contact your local business office (phone number is on your phone bill) and ask about having a feature/service called "Remote Call Forwarding" added to you current/old phone number.  All calls originally destined for you current/old phone number will be redirected to you new number --even though the old phone line has been disconnected.  With this arrangement YOU will be billed for all charges for all calls forwarded.  (Sort of like establishing an 800 number for your customers, except that your customers continue to simply dial the number they have always used.
    Alternatively, if you simply disconnect your current/old phone number you should be presented with the choice to have calls to your old number intercepted and the recording will announce your new number, so that your customer can hang up and re-dial the new number --in this case your customer(s) will pay the charges associated with calling the new number.  You should also be presented with the option of having the intercept recording offer to automatically connect the caller to the new number --again for an additional charge in addition to the charges associated with calling the new number.
    Note that "Remote Call Forwarding" is a feature that will remain active for your number until/unless you cancel it.  The intercept announcement/connect arrangement will be automatically removed from your old number after several months, based on the demand for new telephone service (and numbers) in your area; or if the number of calls to the old number drops in volume.

  • Can't transfer phone number!!!

    I'm currently a sprint customer and I'm trying to transfer my number to AT&T in the initial stage of setting up my iphone and I get the message:
    "the phone number you entered cannot be transfered. You must uncheck the transfer number option and clear the information in the text fields to continue"
    I've done it 20 times now and checked my account number etc. more than a few times....
    Whats up?
      Windows XP  

    AT&T will say you cannot transfer your phone number if your old phone number is in a different service area than your current location/billing address. HOWEVER, there is a workaround.
    On the first screen of the activation step, you'll need to enter your old billing zip (i.e. a zip code that matches the area code of your current phone number). Later in the process you'll be able to enter your correct billing address.
    See this link for a full explanation..
    http://tinyurl.com/2aja4t

  • Transfer order number

    Hi...
    Can anyone tell me field name for Proposed Transfer Order Number in PP module.
    Regards,
    Sandy

    Hi Saleem
    In MSEG you can find TR number (MSEG-TBNUM). Take MBLNR from MSEG and pass into LTAK table. There you can find TO Number (LTAK-TANUM)
    Hope it helps
    regards
    Srinivas
    reward if it is useful

  • Transfer VOIP Number to SKYPE

    I currently have a VOIP number with BT in UK.  Can I transfer this number to be used in Skype?
    Solved!
    Go to Solution.

    Hi, Claywd,
    Skype Number 
    Instead of porting a number into Skype, start a Skype Number subscription.
    Anticipating your next question, a few caveats to be aware of so you can make an informed decision: while you can take out up to ten (10) Skype Number subscriptions per Skype account, call forwarding and voice mail function for the Skype account itself, not each individual Skype Number.  What people tend to do who require a facility to separate voice mail and call forwarding for each Skype Number is to start a new Skype account for each Skype Number they need.  The FAQ articles related to Skype Numbers remind us that Skype Numbers can not accept incoming SMS messages; these are routed to a mobile phone number instead.
    There may be other Skype-compatible add-ons as noted in the post, above, however I confess I have not researched anything like this lately.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How can I transfer my number onto an AT&T phone?

    I have already unlocked the phone from AT&T but not I do not know how I can transfer my number onto it, any tips?

    Do you have an account with AT&T?  Are are you trying to activate an AT&T phone on a Verizon account?  What model phone?  It may not be possible.

  • Transfer Skype number from Skype to British Teleco...

    If I were to use a Skype number and use it for six months. After this time I wanted to use BT instead of Skype could I transfer my number from Skype to BT?
    I have contacted BT and they said I will need a PAC code from Skype to transfer the number over. Is this a service Skype are able to provide?

    If I were to use a Skype number and use it for six months. After this time I wanted to use BT instead of Skype could I transfer my number from Skype to BT?
    I have contacted BT and they said I will need a PAC code from Skype to transfer the number over. Is this a service Skype are able to provide?

  • How to find out Transfer requirement number rom Transfer order

    How to find out Transfer requirement number rom Transfer order
    I have a TO number, I need to find out the relevant TR number.
    Is there a way to directly find out?
    OR
    Is there a table where I can check.
    Regards
    Alex

    Hi
    I think the table will be either LQUA or LTAP but if you display the TO and drill down in to it you will find the TR number and by using F1 on the TR number field you will find the correct table that contains the data.
    I hope that this helps
    Frenchy.

  • Transfer of number from talk talk

    Completed form to transfer mobile number from talk talk on Monday evening. Should have completed today but haven't received any notification that the process has commenced. How long should I wait?

    Hey , I'd recommend waiting until Friday to see if anything has happened. If not, get in touch with the customer service team  Here's how to get in touch with the EE Customer Service team:
    If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
    150 from your EE mobile phone
    If you're ringing from another phone, it's 01707 315000
    For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
    Titanium
    Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Maybe you are looking for

  • Path Selection issue in Table Test

    Hi All I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path.. Can any one suggest why the Path is not selecting ...? Appreciate your feed back. Regards, Sairam

  • We need help installing our new printer

    We bought a new HP Photosmart 7520e printer because our old one wasn't working with our computer.  We were assured by the salespeople that it would be compatible with Windows 8.  That doesn't appear to be the case!  We've used the CD that came with i

  • Audio stops playing partway into mpeg4 video

    I recently added an mpeg4 video into my itunes library. It plays just fine in itunes. However, when I try to watch it on the ipod, the audio disappears half-way through the video. The video does continue to play in its entirety, but without sound. An

  • Is it possible to recover a foler that was replaced?

    A problem has occurred and I was wondering if anyone might know how to fix it. This is what happened. -A folder with the same name existed on a computer and an external HD. These folders had different contents though (all image files). -The folder fr

  • HELP PLEASE...getting error message when downloading...

    unable to download extracted files...