Transfer posting between 2 StorLoc (Non HUM managed to HUM managed), MB1B

Hi,
I'm trying to figure out if after MB1B transfer posting (311 movement) an inbound delivery will be created automatically for the receiving StorLoc. This is for transfer of materials from a Non HUM StorLoc to a HUM StorLoc.
If a inbound delivery can be created automatically what costomizing steps do I have to do?
Thanks for you help.
Regards,
Alexander

Hi,
Check following link
can any body send HUM configuration settings
Thanks
Diwakar

Similar Messages

Transfer posting between plants

hi,
i tried to make a transfer posting between plants(301), we have WM in From-plant (1010), but we don't have WM also serial numbers in Dest - plant (1013). so how can i make this.
Now,in material master data for 1010- i assign serial number profile, on the other hand for 1013 plant i didn't assign a serial number profile. when i try to make transfer posting system give a message like "Serial number profiles differ".
could you help me...

you need to maintain serial number profie at both the plants.
Maintain serial number profile and make transfer posting.
Materail in one plant having serial number profile and you are maintiang serial numbers there.
In next plant where system maintain these serail numbers? so you need to maintain serial numbers in second plant also

Transfer posting between plant to plant

Dear Experts,
I tried transfer posting MB1B using movement type 301.
System is showing following error message
u201CFor object RF_BELEG 1010, number range interval 49 does not exist FBN1u201D
Message no. NR751
Please help me out to fix this error.
Thanks in advance.
Prasanna A P

Hey
Goto FBN1 and maintain the number range against 49
It will work.
REgards,
Raman

Transfer posting between storage location

Hi
2 questions: we are going to create a new storage location to make material movements:
1- We have to move stock between storage location.
Storage A(new): without WM
Storage B: under WM.
We would like to know wich is the best practice to do the transfer: MB1B? 301/311 movement type?
2 - If we decided to create a new storage location with WM. Wich are the recomendations or the points we have to consider:
Under the same Warehouse numer? A knew storage type? Wich are the activities in SPRo?
Thanks in advance for the help
Regards
Enzo

http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
If it is the same physical Warehouse you could use the same Warehouse, otherwise a new or no Warehouse.
If the Storage Locations are near by and stock doesn't cross public roads and it's manually initiated, suggest just use a one step as it's the simplest process.
If there's a significant distance but on-site use two-step or if stock transferred by public roads, use STO.

Transfer Posting between plant to plant under 2 company codes

Hello all,
I have 2 company codes 9002 and 2850.
Under 9002 there is a plant 9002 with storage location WHSE.
Under 2850 there is a plant 3105 with storage location WHSE.
Whenever I am moving a material from plant 3105 to 9002, I am getting the following error in the system:
No accts maintained for company code clearing between comp.cds 9002 and 2850.
The system clearly requires a configuration to solve this error. But my doubt is, is there any other way by which I can solve this error without making any new configuration??? My client does not need any configuration but wants this error to be resolved. Is there any way???
Kindly advise.
Thanks and Regards,
Umakanth.

This is absolutely a SAP standard error which can be easily solved by FI guys.
Though I dont remember the transaction code now but it becomes necessary to maintain clearing accounts between two company codes for accounting consistency.
Please convince your client and get it done from FI guys. You will have to show your consulting skills here.

Transfer Posting between plants of QI stock

Hi
Can one give me the procedure for transferring the stock between the plants of QI stock.
Thanks

Hi Mr. Gopal.
I belive you can help for this scenario....
If I make an Import PO on USD currency for 20000 Qty, when I receive the material from Import vendor I'll maintain the customs and excise duties conditions in PO by changing, then MIRO first i'll make payment to the planned delivery cost next for goods (import vendor) then i'll go to J1IEX and MIGO.
Now I want to map that if I receive the partial quntity like 5000 qty. for this I have to clear customs duty and I'll make J1IEX and MIGO.
After 15 days or 20 days I may receive another 15000 qty or partly...even for this I have to make partly payment.
Please give the solution for partly clearing the customs duties with respect to one single import PO and also I may maintain Frieght charges for different vendor (CIF gent) partly to the respective qty. and delivery. I checked that after making MIGO for partly received qty and if I change the condition in PO it cannot change. It says that MIGO have done".
In condition type for duties calculate type is maintained in percentage.
regards,
Madhu

Error in transfer posting between storage location

Hi experts,
while i am transferring the material from one storage location to other in MB1B by movement type 311 , while saving it shows the below error
Data for creating a delivery is incomplete (Vendor)
Message no. M7279
regards
arun

Hi,
Check mvmt type 311 is within plant how it is giving error on vendor.
Tahnks
SUresh

Transfer posting value limit from storage location to location

Dear Experts,
1. Is there any option to restrict the stock value that can be transfer-posted between storage locations ?
2. Any option to limit the maximum stock value a storage location can hold ?
Thanks

Dear All,
Thank you for valued feedback.
1. I was aware of the fact that stock is valued at plant level and it was not possible in standard. I was looking if anyone has done any innovative solution for this requirement.
2. Jürgen L - Thanks for the user exit, I was checking this yesterday and thought of check the Quantity in SLoc * Material Price to check the value before posting.
3.Joshua Albert - I had already configured EWS but business is not happy as there is no restriction only an exception email.
The issue is we are have a sales channel, where we created each Saleman as Storage Location and Transfer the stock to Salesman Storage Location and they do door to door selling to retail outlets and then after 2 days they come back with actual sales invoices which are recognized as sales which is consumed from their Sloc and again stock in transferred to their location, but there is no control on this.
I looked at changing the solution to customer consignment with credit management but credit management doesn't work for consignment fill up.
4. Sangeeta Khurana - Could you please give me more info on wht you hve suggested, was not very clear.
Thanks!

Transfer posting for RT packaging to unrestricted stock transfer.

Guys,
I am having some stock in RT Packaging (501 M) and now I wish to transfer this stock to normal unrestricted. Pl suggest.
Thanks in advance,
Parag Mahajan

Hi,
I'm afraid you cannot post the RTP stock (special stock "M") to "common" unrestricted-use stoc.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b921143ad11d189410000e829fbbd/frameset.htm
Which Goods Movements are Supported?
The following goods movements (and the respective reversal or return movements) are defined:
- Posting Other Goods Receipts to Returnable Transport Packaging (RTP) Stock
- Posting Returnable Transport Packaging (RTP) Quantities at Goods Receipt for Purchase Order
- Transfer Posting Between Storage Locations
The transfer of RTP stock to your own stock is not supported.
So, you can achieve your goal in two steps:
1. Eliminate the RTP stock (502M)
2. Receive it (e.g. 101; 501)
Regards,
Csaba

Stock transfer posting MB1B

Hi gurús,
Im doing an stock transfer posting between two differents plants, and the system show me the following error message:
"No accts maintained for company code clearing between comp.cds XXX and XX1"
Wich configuration is missing in our system?
Thanks in advance for the help.
Regards
Enzo

your going to transfer one company code plant to another company code plant?
if yes
ensure the settings in Company code clearings through FBKP, Clearing between company codes

STO,Transfer posting and GI

Hi,
What is difference between STO,GI and Transfer posting? and Can we do the STO in MB1B Tcode?
Thanks,
Saran.

HI,
STO is transfer of stocks between plants.Which may be between Intra co.cd or Inter co.cd stock tansfer.
ME21N
VL10B
VL02N
MIGO(Receiving plant)
GI-The goods may be issued for production(261),Cost center(201) scrapping etc.
MIGO
Transfer posting-MB1B
Qulaity to unrestricted & vice versa
UR to blocked stk & vice versa
Quality to blocked & vice versa

Authorization Control for Transfer Posting's Storage Location

Dear Gurus,
Hi ! May I know is that SAP has any Authorization Object to control Transfer Posting (SAP R3 4.0B) ?
Let say in MB1B I only allow certain user to do transfer posting with P230 storage location, how should I control it ? With Authorization Profile?
I had tried remove all storage location P230 authorization M_MSEG_LGO from those user who are not allow to use, but sad to say that most of the user who allow to use transaction MB1B also able to do good receipt or transfer posting with storage location P230.
I had check those user's profile, actually in their authorization, there could not get P230 in their M_MSEG_LGO authorization object.
Thank you!
Warm regards

Hi,
I did not tried OLMB before, but I couldn't get the option you ask me to click.
Please refer to the screen, is it the Basis Administration is what you mention lately?
[http://www.pikipimp.com/pp/pimped_photo/s/image/40/552/543/OLMB-compiled.JPG?ts=1232093107390]
I had assign the storage location P230 to the authorize users, but the problem now was those unauthorized users also can use the storage location P230 to do Transfer Posting (MB1B) although I did not assign to them in PFCG.
Thank you.
Warm regards.

Transfer posting from HU managed SLOC to Non-HU managed SLOC.

I have some qty of stock available in HU managed SLOC (In blocked stock)
I need to transfer some qty from this location to a non-HU managed SLOC in the same plant.
I am able to transfer the stock from BLOCKED to UNRESTRICTED, in HU managed SLOC using VLMOVE T,Code. But i 'm not sure about the method to transfer the same to a Non-HU managed SLOC.
Please explain the steps involved here.
Thanks in advanve for your help.

Dear,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOHU/LOHU.pdf
Regards,
Syed Hussain.

Transfer posting - Production to Warehouse (HUM)

Hi,
I would like to do a transfer posting from the Production storage location to the Warehouse what is a Handling Unit managed storage location.
I think the following steps should be done:
MB1B(creation of transfer posting from production storLoc to WH storLoc) with a 311 movement type
an inbound delivery should be created at the warehoude (configuration needed)
or with
VLMOVE (a HU should be created at the source Non HUM storage location first).
Could somebody help me with this question.
Thanks
Regards,
Alexander

Hello Alexander,
I hope the information provided in the link will help you to do so.
[Re: stock transfer from non HUM storLoc to HUM storLoc (vlmove)]
In case you come across any issue while performing it then let us know
Cheers
Kaushik

The Question about stock transfer between HU-Management and WM-Management

Hi,
There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
So, My questions are:
1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
Best Regards
Boxer Du
I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

Hi,
Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
For Inbound delivery type 'HID' is maintained in this view.
Best Regards.
Some One want to discuss the details , can contact me. Thanks.

Transfer posting between 2 StorLoc (Non HUM managed to HUM managed), MB1B

Similar Messages

Maybe you are looking for