Transfer posting field Valuation type

HI, I´m doing a transfer posting in reference to a reservation or to others, and I need that when I complete the field Valuation Type in “From” (from which storage location), this field should automatically completed in “Destination”. This should be working the same way as when I enter the material number, that I press enter and the information of “FROM” is copied to “Destination”.
Thank you
Sofia

Rajesh,
Thank you very much for your answer. It was trying to do this for  933,934,935 and 936. But don´t worry about it because I had solved it. I changed the configuration of the field UMBAR in:
Materials Management
Inventory Management and Physical Inventory
Settings for Enjoy Transactions
Settings for Goods Movements (MIGO)
Field Selection per Mvt Type
The field was a required entry and I changed to Optional entry.

Similar Messages

  • Transfer Posting: From Valuation Type to Valuation Type

    Hi Guys,
    When i do Transfer Posting: From Valuation Type to Valuation Type  in same plant and same Storage location with mvt type 309 system gives Error as below
    "Stock to be removed from storage same as stock to be placed into storage
    Message no. M7104"
    Can any one suggest the solution
    Regards,
    Ashish Vats

    Hello Ashish,
    As you are trying to transfer same material but one val type to another type, the system checks the source location and destination location, but in your case both are the same it throws information/error message. You need to put the source valuation type and destination type as mentioned by Sanjay.
    Hope this will help.
    Regards
    Arif Mansuri

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

  • Field Valuation Type should be available on all PO's

    Hi,
    Would like the field Valuation Type (MEPO1211-BWTAR) available at all times on PO's but when I remove the "Invisible" indicator on the screen setting and activate+save it system just forget what was done and the field is marked "Invisible" again. Any idea to what my problem is?
    BR

    hi,
    The field valuation type becomes editable / uneditable depending on the customisation settings ie. tick the indicator while setting the SPRO settings for the valuation catagories...
    Its not possible to apply to the all PO's at once...it depends on the SPRO settings for each...
    Regards
    Priyanka.P

  • Error when making transfer posting for order type UB

    Hi Experts
    I have created a stock transfer order with order type UB, it's two differents plants within same company, but I got error message " purchase order contains no items for stock transfer" I have checked relevant configuration in OMGN, and also the purchase order, it didn't have problems, so what could be the problems?
    points will be rewarded if helps.
    thanks
    elly

    Hi Elly
    pls check
    1)Goods issue wrt to the STO in the supplying plant ( 351 mvt type).T code MB1B
    2)Good Receipt in the receiving plant ( 101 mvt type ).
    Check item category of item is 'U'
    Check settings in OMGN
    check in OMGN Assign delivery type and checking rule and see if UB is entered there for your supllying plant.
    Also check PO is not subject to release
    Vishal...

  • MB1B transfer posting Idoc/Message type for outbound and inbound

    Hello All
    Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
    Thanks
    Ricky

    Its WMMBXY

  • Valuation of subsequent Transfer Postings with Movement Type - 412 Q

    Hi,
    We are procuring raw material by raising Purchase order (without account assignment) and receiving it as unrestricted stock i.e. Plant stock.
    Whenever the material is required for a particular WBS element, then we are transferring the Plant stock to Project stock with Movement type 412 Q. That special stock is being used for Production orders which are created wrt that WBS element.
    Current valuation of Transfer posting with Movement type 412 Q is as follows.
    1. When we transfer the Plant stock to Project stock for the first time then System is valuating that stock at the Moving average price of raw material say Rs.50.
    2.After transfer posting, values are being updated in the Table QBEW as well as in the Report MBBS wrt Plant, Material and WBS element i.e Rs.50.
    3. Again, when we transfer the Plant stock of same material to Project stock for the same WBS element system is valuating the Project stock at Rs.50 instead of at the Moving average price of that material which is Rs.70 at that moment.
    So what we understand is that the system is valuating the further goods movements of that material (Project stock) is at the price of Rs.50 which was stored in QBEW table (which was updated at the first goods movement).
    So all consumption of that material (Project stock) is valuating at Rs.50, which is not resembling the Moving average price.
    Is there anyway to valuate the subsequent transfer postings of Plant stock to Project stock with the moving average price valid at that moment instead at the the price which is updated in QBEW table for the first goods movement?
    We can change through MR21, but it is not practically feasible to change the price at each and every time for Plant, WBS element and material. combination.
    Thanks & Regards
    Madhusekhar Gupta G

    Please read the explanation about the design with 412 Q movement  in OSS Note 180503 - Val. logic during transfer posting with reversal movem. type

  • While doing transfer posting  in  Tcode MIGO,with moment type 413e

    I am doing transfer posting with moment type 413 ,E
    changing the stock from one sale order to another sale order .
    and  the material is not related to planning .mrp type ND
    I am getting  warning messege
    "sale order (sobkz= ) is not  for this goods moment "
    Can any body help me  to remove this msg
    thanks in advance
    Srinivas

    when a cost center is created with KS01 transaction, then the user has to enter a validity period.
    So this cost center is just not valid for the given date.
    Check in KS03 and ask  the CO consultant to do the necessary actions

  • Transfer posting Mvt type 415

    Hello All,
    While doing transfer posting vide movement type 415, I am getting one error as "Account 62000026 requires an assignment to a CO object". How to solve this?
    I have given Project / WBS element to which stock is to be transferred from unrestricted stock. This itself is a cost element.
    Please help.
    With regards.
    Sanjay

    Hello,
    Go to FS00 --> 62000026 --> Click on the edit cost element button, it will take you to cost element screen. If you have a cost element , enter the same. Otherwise create a cost element with KA01, give G/L account and controlling area, save.
    Prase

  • Canu00B4t use two step transfer with split valuation ?

    Hi people , i´ve activated split valuation for MaterialX , it has two Valuation types ( Production and Purchase ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
    Use one-step procedure for transfer posting to mat. subj. to valuation
    Message no. M7048
    Diagnosis
    In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
    Procedure
    Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
    The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, considering that having to create a transfer order for each movement will duplicate work and using a one step transfer won´t be practical. I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

    First of all , thanks everyone for the help.
    Csaba Szommer, Kunal ingale  , i read the OSS note and the pdf and indeed everything confirms it´s not possible to do the two step movement. So , i tried the stock transport order and something else appeared here. When creating this type of order , the system first ask for a Supplying Plant , then you can populate the material , quantity and the destination plant. But then it asks for the Valuation Type of the material involved, and it seems this field is Mandatory . Is it possible to make this field on the transport order as optional ? I couldn´t find this field at SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level .
    I need this field to be optional for the following reason. In my company there´s a relation between two plants , Plant A ( from where products are dispatched to the customer ) and Plant B ( where the material is produced with valuation type "Production" and sometimes is buyed from vendors with valuation type "Purchase" ) . The idea is to run an MRP which will generate the material needs on Plant A considering the Sales Orders. This need will be then transformed (automatically by MRP ) in Stock Transport Orders with Supplying Plant "Plant B" and receiving "Plant A". The problem here is that , at the moment of the transport order creation it´s no possible to know which will be the valuation type of the material that will satisfy the need. I mean , Plant B ( production and buying plant ) will check the list of needs for Plant A and then will decide which material ( with which Valuation Type ) they will provide considering the actual stock levels at the time of the MRP run.
    In a few words, i see the only way to do a two step transfer of a split valuated material is using Stock Transport Orders , is there a way to make the field "Valuation Type" optional ?. The idea would be to choose the Valuation Type of the material at the moment of the Good Issue.  Thanks a lot , once again.
    Edited by: Christian  Len on Jul 7, 2008 3:16 PM

  • Defaulting Valuation type of header material in production order

    Hi PP users,
    I have a scenario where a Semi-finished material SF is subject to split valuation as per valuation type = In-House & Export.
    However, the production of SF is always done in MTS environment and client wants that each production order for this SF should be posted for GR (through order confirmation) with valuation type = In-House. When they will have the requirements for SF to be exported, then they will be doing MB1B/309 for SF from valuation type = In-House to Export and then sale from valuation type = Export.
    Now I have seen that for split valuated SF or FG, when you create production order then in the GR tab of order, a field is autoamtically made available for Valuation type. This field is not a mandatory one and hence can be left blank also.
    At the time of order confirmation for SF, the valuation type field is open for input under 'Goods Movements' details. So, even though it is intended to do GR for valuation type = In-House, user can by mistake put valuation type = Export.
    Is there any way in SAP whereby the valuation type (whenever applicable as per header material) field in production order is made mandatory or even defaulted with desired valaution type (in our case, valuation type = In-House)?
    Once either of the two options will become possible, I will be using transaction variant for order confirmation transaction to make the field Valuation type for Output only (not ready for input).
    Thanks in advance,
    PP_HKV...

    Hi
    The field - Valuation type can be made mandatory in T-code MIGO. There is a setting in customizing as Enjoy Setting in Material Management. Using this you can make the field mandatory in MIGO (GR).
    Similarly bu using screen variant you can also make the field mandatory in Order confirmation - Goods movement. (CO11N).
    For making the valuation type as default, there might be a solution in BAdI. Please check with your ABAPer.
    Regards
    Amit parkhi

  • Change field Stock Type in transaction MIGO

    HI Gurus
    My user wants to change the field Stock Type in good receipt after that good receipt has been created .
    Is there a way to change this field ? Using transaction  MIGO  can only display the good receipt .
    Thanks in advance

    Once GR has been done you can not change the stock type in display.
    Using MIGO at the time of goods receipt you can change the stock Type. Once you have posted to a wrong stock type then you need to do the transfer posting from stock type to stock type.
    Explain your requirment?
    Check [Stock types|http://help.sap.com/saphelp_46c/helpdata/en/a5/63393f43a211d189410000e829fbbd/content.htm]

  • Transfer Posting (MB1B): Account XYZ requires an assignment to a CO object

    Hi,
    Iam doing a Sales order to Sales order transfer using MB1B (Transfer Posting) and movement type 413 (E). However i get an error "Account 526020 requires an assignment to a CO object".
    Can someone advise as to where i need to assign the Costobject.
    Please advise.
    Thanks,
    Safi

    Do you really need to post something to a Cost Centre? If its a SO to SO transfer, what kind of cost is posting to the Cost Centre?
    I would suggest you analyse the GL Account (why it needs an assignment to a CO Object?) and consider changing the Field Status Group or assigning a GL that is not a Cost Element.
    If you really have to assign a Cost Centre, then OKB9 is your best alternative. Enter a Common CCtr that will collect the costs and maybe let you allocate the same later.
    Cheers.

  • Transfer Posting 412 E triggers transaction key AUM

    Hi everybody,
    I'm trying to do a transfer posting ( 412 E) , every data ("dest" and "from" as material, plant, batch and storage location ) are the same. But the system is triggering the transaction key AUM, and I dont know why. I 've checked the material price (MAP) and it didn't change.
    Pls your help!!!

    The transfer posting made with the movement type 412 E is a reversal movement type (for the movement type 412, T156-XSTBW = X; so the movement type 412 is a reversal movement). The valuation logic for transfer postings made with reversal movements is explained in the note 180503.
    The material, valuation type and sales order item has an entry in   table EBEW . Table EBEW stores the valuated sales order   stock, similar to   MBEW, but this type of stock has its own pricing. All goods movements   with movement type 411/412 special stock E (valuated) will be done   the price determination of table EBEW.
    As explained in the attached note 180503 when you make transfer  posting with movement type 412 and special stock indicator E into the  sales order stock from the valuated stock the  goods movement is now  valuated with the price of the receiving valuation segment of the   of the sales order stock and not with the price of the issuing valuation segment.
    The difference between the valuation in issuing segment to stock account and the valuation in receiving segment to stock account will be posted to AUM account.

Maybe you are looking for