Transfer posting for RT packaging to unrestricted stock transfer.

Guys,
I am having some stock in RT Packaging (501 M) and now I wish to transfer this stock to normal unrestricted. Pl suggest.
Thanks in advance,
Parag Mahajan

Hi,
I'm afraid you cannot post the RTP stock (special stock "M") to "common" unrestricted-use stoc.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b921143ad11d189410000e829fbbd/frameset.htm
Which Goods Movements are Supported?
The following goods movements (and the respective reversal or return movements) are defined:
- Posting Other Goods Receipts to Returnable Transport Packaging (RTP) Stock
- Posting Returnable Transport Packaging (RTP) Quantities at Goods Receipt for Purchase Order
- Transfer Posting Between Storage Locations
The transfer of RTP stock to your own stock is not supported.
So, you can achieve your goal in two steps:
1. Eliminate the RTP stock (502M)
2. Receive it (e.g. 101; 501)
Regards,
Csaba

Similar Messages

  • Transfer posting for sale order

    I have Material A Received from customer A 100 mtrs, in Storage location 0001
    Customer is telling me to use only 20 mtrs. so i will raise sale order (for the rest of the 80 mtrs he will tell when to issue to prod)
    By this time i have to do transfer posting only for 20 mtrs and also i have to create a batch and keep it in 0002 storage location
    what is the correct movement type i have to use??

    Hi murugan,
    I am receiving material by raising PO, then i am doing GR
    For eg suppose customer is giving 10000 mtrs, i will raise PO for 10000 mtrs and take the printout of it and i give to him as Receipt that PO number is for eg 1000
    i will do GR for 10000 qty against that PO number 1000 and keep it in 0001 str location
    in stock i will have 10000 mtrs of customer material
    Later after 1 month he will tell me what design has to be printed on the Material
    that too he wont give for total 10000 mtrs he will be giving only for 2000 mtrs
    for this 2000 mtrs i have to create a batch and i keep it in 0002 str loc
    while receiving material the code will be CM01
    After receiving the design from the customer we have to do transfer posting for 2000 mtrs and the code will be BC01 batch - 1000b01(shows 1000 is the Tracking number(PO number) B01 Batch 01)
    so that we come to know how much material have been received from the customer and for how much metres we have received design
    How much is still lying in storage location, tracking will be easy
    My question is CM01(customer material at initial stage dont have batch number)
    After receiving design for partial quantity  to do TP matereial to material  for 2000 mtrs fromt received 10000 mtrs.
    Material to material TP at that time system should create Batch? sale order also will be created as soon as we receive the Design for 2000 mtrs

  • Suggest EnhanceMent For SALES area determination In stock Transfer.

    Suggest EnhanceMent For SALES area determination In stock Transfer.
    V02V0001 Sales area determination for stock transport order Doesnt Work,

    Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
    Create Purchase Order (ME21N)
    Create Delivery in background (VL04, VL10a, VL10C, etc)
    Change Delivery for picking / packing & PGI (VL02n)
    Create Billing Document (VF01)
    Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
    Incase of Inter-company, the process will be as under:
    Create Sales Order (VA01)
    Create Delivery (VL01N, etc)
    Change Delivery (VL02N)
    Create Billing Document (VF01)
    Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
    Regards,
    Rajesh Banka

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

  • Reset transfer posting for doubful receivables and its provisions

    Dear Expert,
    I have run f103 (transfer posting for doubful receivables) and f104 (provisions for doubful receivable) but the value is wrong.
    is it possible if i want to reset/cancel f103 and f104 and the rerun it? how can it be?
    Thx n regards,
    Marilyn

    SE93 add variant

  • Transfer posting for intercompany

    Folks,
    I have the following scenario:
    Company code 1, plant 1, SLOC 1 and WHS 1
    Company code 2, plant 2, SLOC 2 and WHS 2.
    Is it possible to do a transfer posting (for example 301) between plants that have a different company code?
    Regards,
    MdZ

    Hi,
    check this link
    Its not possible with 301 mvmt type
    [http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm]
    Thanks
    Suresh

  • You can only make a complete transfer posting for the quant?

    Dear All,
    The error message "You can only make a complete transfer posting for the quant"  displayed when I Create a TO in LT03 for a Delivery.  While the total available qty = 200, I am only creating TO for qty = 5.
    What settings need to be done to allow partial quatity?
    regards,
    Shetty

    Hi,
    Please check the below config in your system:
    LE>WM->Interfaces>Shipping>Define Shipping Control-->Shipping Control per Warehouse Number
    Here Put check for partial picking .
    Hope it will help you.
    Rgds,
    Kris.

  • Transfer Posting for Plant to Plant: Account Determination

    Dear all,
    I'm performing a standard transfer posting from Co. X Plant A (issuing plant) to Co. Y Plant B (receiving plant). Upon successful of the transaction, there are 2 accounting documents generated for both issuing plant and receiving plant, respectively.
    Alright, when I view the accounting document for the receiving plant, it's debit stock account and credit another account. I know that the configuration for stock account is under BSX. However, I'd like to know how the SAP system determine which account to be credited at the same?
    Thanks.
    Steven

    Dear all,
    Thank you for the answers so far. However, I apologize if I've caused some misinterpretation.
    Let me explain further. I'm not using STO. I"m doing a transfer posting of stock using movement type 301 between 2 interco. plants as explained earlier. My question is more on accounting document generated for the receiving plant. The following is what I get:
    Accounting Document for Receiving Co. Y Plant B:
    Debit - Account GLxxxx -> Spare parts (This is my stock account configured in OBYC - BSX) => OK, no problem here.
    Credit - Account Nxxx -> Co. X => My question: Where or how did the SAP system acquire this account information at the first
    place? I don't remember configuring this in SPRO.
    Thanks.

  • Transfer Posting for Line Items between Reconciliation Account

    HI,
    My customer want to transfer costing the line items between a old Reconciliation Account and a New Reconciliaton Account.
    For example, i have a Account Group Vendor with a old Reconciliation Account " Vendor CEE".
    This reconciliation account has the line items concern differents Vendors.
    Edit a new Account Group calling ( CEE) to replace a Old Account Group.
    After changing in Vendor Master data the Reconciliation account, we need to transfer posting the line items in the new account reconciliation
    In Sap system is there a report can do it? Can you help me?
    Regards

    Hi,
    Thank you for the answer.
    I did that, and exactly:
    - In Trx Obbw insert the reconciliation account and Adjustement account.
    - and execute the trx FAGLF101 in test but the sap system give me the following error:
      " Account determination for transaction A00 is missing for account 0205016001 ZM P001 "
       Message no. FR005
    Can you help me?
    Regards
    Edited by: Marika De Cesare on Oct 18, 2011 1:06 PM

  • Table for  the PO Date and Stock Transfer Order Date of a material no

    Hello Everyone!
    I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
    On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
    I am not getting the table through which I can get these two dates for a material.
    Please help me out.
    Its urgent.

    hi,
    see these tables:
         EKKO – Purchase Order Header Table
         EKPO – Purchase Order Item  Table
         EKBE – PO History table.
    reward if its useful

  • One P.O . for all plat in intercompany stock transfer

    Hi Experts
    In Intercompany stock transfer scenario
    Client demand to create Single P.O. for all plant,
    (one company code has 5 plant  for this 5 plant they procure goods form another plant which belong to deiffernt company code so here client want to raise single P.O. for this 5 plant )
    Is it possible ?
    if yes what is customization for that
    thanks in advance

    Hi ,
    As per my knowledge this is not possible , because you can enter only one plant in PO.
    you can have 5 PO's for 5 plants...
    Lets wait for others reply..
    Regards,
    Ramesh

  • Creating Single PO for all Sites in Intercompany Stock Transfer

    Hi Experts
    In Intercompany stock transfer scenario
    Client demand to create  Single P.O. for all stores ,
    Is it possible ?
    if yes what is customization for that
    thanks in advance

    STO CONFIG:
    The following steps have to be followed in order to configure stock transport order
    between two plants.
    1. Create a vendor for the Company code of the receiving plant using account group 0007
    via T-Code XK01.
    2. In the purchasing data view assign the supplying plant and the schema group
    3. Create customer with the sales area of the vendor.
    4. The shipping conditions, the delivering plant and the transportation zone determine the
    route in the STO.
    5. In the pricing procedure determination relevant to the STO assign document pricing
    procedure and customer pricing procedure to get the pricing in the invoice.
    6. Maintain condition records for pricing condition.
    7. Maintain carrier as a partner in the customer master.
    8. In OMGN select the supplying plant and assign the company code and sales area.
    Similarly select the receiving plant and assign the company code and sales area (The
    company code to which the plant is assigned to).
    9. Assign the delivery type and checking rule to the document type.
    10. And finally, assign the purchasing document type to the supplying plant and the
    receiving plant.
    11. Create the STO using T-Code ME 21N and save.
    12. Check for release strategy if any and release using T-Code ME 28.
    13. Create delivery in background using VL10G.
    14. If delivery is created, it is an indication of correct configuration and master data
    creation.
    Stock transfer between two plants in deffernet company codes is known as inter company
    stock transfer.
    Material shoud be maintained in both supplying and receiving plant MM01
    Sotck should maintain only in supplying plant MB1C
    Create receving plant as a customer in suplying plants company code and sales area
    XD01
    Assign this customer number in receving plant detials OMGN
    Assign supplying sales area in supplying plant details OMGN
    Assign delivery tupe NB for in combination of supplying/ receving plants.
    Create STO ME21N
    As it is normal there in the item details wer should get shipping date i.e customer number
    Go for Deliveryy VL10B
    Shipping point *****
    Select PO go for execute
    then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
    Goods Issue VL02
    Delvy doc **********
    Click on picking
    enter the picking qty
    Click on PGI
    in the mean time check in the PO history you will get the details
    Goods receipt MIGO
    Stock overview the stock will be updated....

  • Error when making transfer posting for order type UB

    Hi Experts
    I have created a stock transfer order with order type UB, it's two differents plants within same company, but I got error message " purchase order contains no items for stock transfer" I have checked relevant configuration in OMGN, and also the purchase order, it didn't have problems, so what could be the problems?
    points will be rewarded if helps.
    thanks
    elly

    Hi Elly
    pls check
    1)Goods issue wrt to the STO in the supplying plant ( 351 mvt type).T code MB1B
    2)Good Receipt in the receiving plant ( 101 mvt type ).
    Check item category of item is 'U'
    Check settings in OMGN
    check in OMGN Assign delivery type and checking rule and see if UB is entered there for your supllying plant.
    Also check PO is not subject to release
    Vishal...

  • Restricting Transfer Posting for Reserved Stock

    Dear Gurus,
    I have a scenario that the user should not be allowed to transfer material (SLoc to SLoc) that has been reserved. At the moment the system is allowing without any warning or error. Is it possible and do I have to configure any settings for it?
    Regards,

    Hi,
    Contact your Basis team and lock the movement type 311.
    Reards,
    Mahesh Wagh

  • Transfer posting for sales order stock questions. Propose BOM components?

    Hello
    We are working with a third party subcontracting scenario (SD item category TAB/sched line CB), where a Subcontracting PO (item cat L/acc assign M) gets generated.
    At MB1B, I perform a 412E movement to issue components to a sales order.
    When I issue components to the sales order, I need to manually enter the component and quanity. I would like the system to propose the component quantity, similar to when I do a movement 541 to a subcontractor.
    Is this possible? Any advice would be greatly appreciated !!!
    Regards
    Ken

    Hi
    Goto  Transaction Code, VOV6--> Choose Sch.Line catagory, CB> Go in to detail--
    >There you maintain  PR Doc.Type as NB, Acc.***.Catagory as "M"  and Itemcatagory as "L",then after completing the sale order, Automatically PR will be created  with item cat L  and acc assign M ....
    Then create PO by refering this PR...
    (Before that make sure that you have maintained the link bet. Acc.***.Catagory as "M"  and Itemcatagory as "L" in  OLME-->Accout Assignment--
    > Define combination of Acc.***.Catagory and Item catagory
    and also In OLME-->Purchase Requisition---->Define document types  -
    >you have to maintain the link for converting this PR into PO...)
    If you have already maintained BOM, then in PO---> Material data tab---> the BOM will be automatically exploded.
    Then you can issue these items to SC Vendor in Transaction code. ME2O
    Hope I have cleared your doubts
    Reward if useful
    Regards
    S.Baskaran

Maybe you are looking for