Transfer posting from batch to batch using 309 or 311 issue

Hi Experts,
Need your help, I'm facing the following issue, I'm trying to transfer posting from batch to other batch using 309,
Using MIGO
the material, plant, storage location are the same but the batch number are different, I didn't get any message and when I save, there's nothing is changed, I checked the material document and found that the destination batch is same as source batch.
Using MB1B
the material, plant, storage location are the same but when I entered the source batch, the batch number is copied to the destination batch number and I got message M7104 "stock to be removed from storage same as stock to be placed into the storage" and I can't change the destination batch number.
Please advise how can I solve this issue or if there's any alternative way to transfer from batch to other by one step.
Regards,
Mohamed Mansour.

You can well use 309 movement type in MIGO or MB1B and also you can well change the receiving batch number during the transaction..
MB1B
MIGO
I think you can able to change the receiving batch.
What the status of receiving batch shows in MIGO or MB1B ?
Also check you field selection for movement type 311
Go to OMBW, double click on 311, then double click on Transfer Posting
It should be as optional entry.
Then try again MB1B.
Regards
Dev

Similar Messages

Transfer posting from Unrestricted to Quality using QM

Hi Team,
Im not expert in QM, I need your help.
Here is using the module QM for quality inspection, I have the following situation:
A GR 101 was done into a PO.
Quality release the material and stock moved from Quality to Unrestricted
The detect that the Qty of pieces are not correct and now they want to reverse the GR, they tried but was not possible. Error:; Deficit of SL Stck.in qual.insp 972 PCE : 004933000301 7601 9001
So What step I need to follow in order to move the inventory from unresticted to Quality.
I already try with Mov 322 but get this message: Change the inspection stock of material xxx in QM only

If you have QM then you cannot post stock with MM movement into Q-status.
But you can reverse the GR in MIGO, but not with cancel in reference to material document. You have to do a Goods receipt to purchase order but using then movement type 102 for cancellation. Then in the detail tab you can change the quality status from the proposed quality status to unrstricted status.

WMS Transfer posting from Q to unrestricted issue.

Hi All
Im having some issue in when I change from Quality inspection to Unrestricted stock.
When I GR using MVT 101, the stock will go into Interm Area 902 with Q status in the warehouse
I then use MVT 321 to post the certain material from Q to unrestricted.
When I use LS26 to check, the stock status of the material has changed from Q to unrestricted.
However when I create a TO, the status in the TO is still "Q". ( it should be unrestricted so when i do confirm the TO , it will be placed into the propose bin as unrestricted stock not Quality Inspection )
I check the TR that was created for that material and the stock status is still "Q".
Is there some setting im missing from my configuration , as the system should automatically change the TR from stock status "Q" to unrestricted after the transfer posting from MVT 321?
Thanks in advance !

Hi Frenchy
Thanks for the reply.
As explained before. When I do a MIGO from inbound, in the WMS warehouse it should go to a general receipt area ( 902 ) as it should not directly go to bin because its needs to pass IQC before it should be properly transfer from the general receipt area to the bin. In the warehouse via LS26. It's status is Q, and you are correct, when I create the MIGO it automactically creates a TR with the status. After it has pass IQC, ( via inspection lot QA11), a transfer posting is created to for the material ( by batch code ) to change to unrestricted stock. Again in WMS view via LS26. The stock with the batch code is changed to unrestricted.
Now, my question is, after MVT 321 for transfer posting, in WMS is there a linkage where it should automactially change the TR status to unrestricted so when i create a TO via material document of the GR, it should go to unrestricted instead?

MB1B: Transfer posting from material to material

hello,
I would like to add material validation mechanism in MB1B for transfer posting from material to material, that is we can define only particular materials can be transfer to receiving material and validate in MB1B with specified movement type, how to do this?
Is there any thing available in standard?
we can do this using user exit but I couldn't find any exit relevant for this scenario?
I appreciate your earliest responses.
regards,
Jawed Ali

well I have checked all these exits but none was called during the process:
                                                                                MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read From RESB and RKPF For Print List in MB26
MBCFC003            Maintenance of batch master data for goods movements
MBCFC004            Maintenance of batch specifications for goods movements
regards,
Jawed Ali

Transfer posting from material to material ( for blocked stock)

Dear All,
Whether transfer posting from material to material can be done for blocked stock also? because through 309 movement type i did not find any option, so let me know if there is any option
Regards,
Balakrishna R.V

Dear
Transfer posting of material can't be done if material is in Block Stock.
When block stock is inspected in quality test in inquality inspection stock then it goes to Unrestricted use stock.
finally Transfer posting is possible for unrestricted use stock material.

HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Transfer Posting: From Valuation Type to Valuation Type

Hi Guys,
When i do Transfer Posting: From Valuation Type to Valuation Type in same plant and same Storage location with mvt type 309 system gives Error as below
"Stock to be removed from storage same as stock to be placed into storage
Message no. M7104"
Can any one suggest the solution
Regards,
Ashish Vats

Hello Ashish,
As you are trying to transfer same material but one val type to another type, the system checks the source location and destination location, but in your case both are the same it throws information/error message. You need to put the source valuation type and destination type as mentioned by Sanjay.
Hope this will help.
Regards
Arif Mansuri

Transfer posting from storage to storage locn

Dear All,
I understand we can do the transfer posting from storage location to storage location through Mvt type 311.
The scenario is I have to transfer the goods from Storgae locn 1 unrestricted to storage locn 2 quality inspection.
Kindly let me know if it is possible.

Hi,
There is no direct movement type. You have to do this in 2 steps. 1st with 311 for St.Loc-St.Loc then 322 for Unrestr to QI.
Hope it helps
Shiva

All of sudden my Apple Mail won't transfer photos from Mail to iPhoto using the "add to iPhoto" feature in the drop down menu

All of sudden my Apple Mail won't transfer photos from Mail to iPhoto using the "add to iPhoto" feature in the drop down menu. Do you know how to fix this?

mmchisholm - just so you know you're not alone, I too am having the exact same issue as of latest software update bundle. Have to manually add each photo until Apple issues solution or minor software update.

Transfer posting from functional area A to functional area B

When running the F.50 transaction some currency gain/loss postings have been posted to the wrong functional area. Can somebody help me how I can do a transfer posting from one functional area to another if it's possible? Or do you know another solution to this issue?

Hello,
Please try once transfer posting with clearing through T.code F-51
and choose transfer posting with clearing.
Please try this once in development i tried this for other like changing of business area amount cost center like that..
Regards,
Sankar

Before lollypop upgrade I could transfer files from LGg3 to computer using the LG supplied USB cord. How do I fix this bug?

Before lollypop upgrade I could transfer files from LGg3 to computer using the LG supplied USB cord. How do I fix this bug?

Is the G3 not recognized by the PC? Or is it recognized and you don't see the ext SD card? Are you able to use the Wireless Storage feature to transfer? Do you have updated USB drivers from the LG support site?

HT204053 transfer photos from iPhone to mac using iCloud?

transfer photes from iphone to mac using icloud ?

Connect the iPhone to your Mac and launch iPhoto. It will detect the photos and indicate those that are not already in the library so you can import them.
Be careful in letting iPhoto delete the photos from the iPhone. It's best to delete them manually from the iPhone so you have more control over what gets deleted.
Once you have your iPhone and iPhoto setup with Photo Stream to automatically import all new photos taken with your iPhone it'll be a seamless transfer:
OT

Transfer posting from one plant to another plant

Friends i want to transfer goods from one plant to another plant of same company code and iam trying this one in transaction migo if post for this it gives an error
"posting only possible in periods 2006/05 and 2006/04 in company code" what error it is

Hi,
Use the MMPV to open the new posting period date.
here you have to use your company code & Current date , then execute to open the new posting period.
while running this transaction you ensure that GR open screen should be closed.
hope it helps....
manoj Singh

Transfer Posting from Vendor Ledger to Customer Ledger

Dear Experts,
We are in to service industry, most of our customers are also having vendor codes, we used to give some commission to them the is posted to vendor codes due to TDS posting, on periodical basis, the same needs to adjust with outstanding in customer accounts.
For this our users are processing through individual posting for each customer through F-04, as volume is very high and it is consuming lot of time to complete this activity. Is there any standard process available in SAP, so that we can process all the transfer postings from vendor ledgers to customer ledger in a single process on periodical basis.
Thanks & Regards
Madhava Raj

Hello Raj,
You can use BDC as stated by Mani.
BDC - POSTING_INTERFACE_CLEARING
Please check this link for more information related to this BDC.
http://scn.sap.com/message/3770202\
I hope it helps else revert us for any issues.
Thanks & Regards,
Lakshmi S

Transfer posting from Sloc to Sloc

Hi,
We do TF from storage location to storgae location with in the palnt using 311 mov. type against Reservation.It is taking 3days for the stock to receive physically in the receiving storage location.
Now the client wants the stock to be" in transit" till it reaches receiving storage location,for this we can use 313 and 315 movement types.
But client wants to do transfer posting form one Sloc to other Sloc only using "Reservation"
But the system is allowing to create reservation only using 311 but not with 313 movement type.
Kindly suggest me how to do 2 step TF from Sloc to Sloc using Reservation.
Thank you.

Hi,
Compare the configuration of movement type 311 & 313 will find two differences
1)Reservation category is defined as U for 311 & it's blank for 313.
2)Allowed transaction for movement type for both 311 & 313. For 311 MB21 is defined whereas for 313 MB21 is not defined.
Because of these reason you are not able to create reservation against 313 movement type.
If you want to create reservation against 313 movement type change configuration accordingly by comparing 311 movement type.
Regards
Ravi Shankar.

Transfer posting from batch to batch using 309 or 311 issue

Similar Messages

Maybe you are looking for