Transfer Posting of Restricted stock Plant to Plant
Hi,
How to do transfer posting of restricted stock Plant to Plant
Kunal
HI
One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
2 step process is 303 and 305
From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101
Similar Messages
-
Transfer posting of subcontracting stock with mvt type 541 from project stk
Hi,
we run project MRP and the requirement is raised for subcontracting item also ,after converting the PR into PO when I try to transfer post material in MB1B using 541 ,system shows Error Purchase order does not contain any item even I have material in my project stock,what may be the reason?
Regards
KanthaHello Kantha,
The components which you provide for a vendor are manged in a vendor-related special stock, O. This stock is updated at plant level, becuase material is actually not in your plant. If you want to provide stock to vendor the avialble stock types in subcontracting are from un restricted use and in quality inspection.
When you provide componets to vendor via transfer posting this needs to go from only unrestricted use stock to the stock of material provide to vendor movement type is 541.
So to execute the transfer posting for the stock of material provided to the vendor, you have to specify special indicator O, if not the transfer posting will not differ from normal transfer posting.
Also T-code MBLB will help you in evaluating the stock of material provided. So you need to transfer the stock from project stock to unrestricted stock to carry out the transfer.
Br,
Tushar -
Movement type 453 (Transfer posting to own stock from returns from customer
Hi all,
I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
it picking from from profit center from in material master under sales:general/plant tab but we need picking from based on account assignment group in the material maser sales org.2.
Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
K.SatishHi,
In Co controlling are the automatic account assignment is only the default and it on the Priority.
if you think what is picked up from the mm is wrong.
the best way out will be to go with the substitution rule.
based on the movement type use the rule.
hope this is clear , assign points.
With regards
Krishna -
Block posting for restricted stock
Dear all,
Currently when perform migo for restricted stock,system only show warning message.
How to block the system to perform any posting for restricted stock?
Thank youcheck the message number and change the message category form warning to Error at SPRO: MM > Inventory management and physical inventory > define attributes to system messages.
OR
take ABAP help -
Transfer posting under restricted condition
Hello people,
I was able to transfer post a document under batch restricted condition. This was the case with 3 to 4 documents. I do not know why the transfer posting was allowed because the system is supposed to throw an error when I try doing it. Now when I want to reverse this, the system is throwing an error message saying the this cannot be done under batch restricted condition.
The problem is that this has to be reversed somehow. Can someone please help me out on what might be the most probabale reason for this and how to go about fixing this issue.
Points will be rewarded to helpful answers.
Thanks,
DikshithaHI
One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
2 step process is 303 and 305
From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101 -
Material stock to be posted to restricted stock( urgent please)
Hi genius,
This is below my scenario, Please let me the solution .
1. Material to be received thro GR ( MIGO ) and which has to be posted to unrestricted stock.
2. Material will be reserved by the users as on when required thro MB21 T.Code.
3. Reservation does not allow the reservation qty over the quantity available present in unrestricted stock.
4. New Reservation should not allow to create more than available qty. which is taken into the account of already reserved.
5. Consumption should be blocked on actual objective.
6. Plant control/Indented items should be put to restriction on issuance only to indented department.
7.Less impact on account inventory qty and value reconciliation.
Please find anyother solution , Let me know, I am eagarly waiting for your valuable reply,
Regards
JeyaHi
1. Through movement type 101, stock will be posted as unrestricted stock.
2. Reservation is created via MB21 only
3 You are defeating the logic of reservation if in you scenario reservation should not exceed the quantity available in stock. If you are running MRP, it will take the reservation into a/c and if any deficit in stock in there it will draw an PR for the same.
4 Same answer as point 3
5 You can restrict consumption against reservation.
6 You can control this thru reservation.
7 Its matter od discipline. -
Transfer Posting from Own stock to customer stock
Hi ,
I have two storage location. Now i wanted to transfer stock from one storage location to other , but while transferring the stock should be received against a sales order in the receiving storage location.
For e.g.. i have a storage location in the plant and another one in port. I want to transfer stock from the plant one to the port one.So when the goods are received in Port storage location it is received against a sales order that is booked against a sales order. can this be done?
how to do this?
ram.try it with movement type 412, I can enter a receiving storage location different from the issueing storage location while doing the transfer posting own to customer stock
-
Transfer posting to block stock through quality notification
Dear QM Experts,
I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
1. Material is batch managed
2. Storage location is managed by warehouse management and has storage bin.
3. Material has split valuation
When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
I would be grateful, if someone can throw some light on this.
Thanking you,
Anand RaoWhich valuation category do you use in material master accounting view?
In my experience..
Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
Anyway try below..
At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
I'm not sure why your batch master does not have a valuation type.
Regards
Luke -
Mass Transfer Posting From Quality Stock to Return Stock with FI Effect
Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
DarveshHi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document -
MB1B transfer posting error "SL stock in transfer exceeded by 20 PC."
Hi All,
I'm doing a MB1B transfer posting for my materials from 1 storage location to another using movement type 311,
but some of the materials I encountered this error.
"SL stock in transfer exceeded by 20 PC : 'Material name' 'Plant' 'Stor. Loc' "
I went to MB5T to check the materials if it's in the stock in transfer, but they are not in the list.
I've also check in MMBE to check the stock value of these materials, it shows 100 in unrestricted use which is more than what I'm transferring.
May I know what have i missed checking?
Please help and thank you.Hi There
Seems you are trying to do the One step Transfer between locations (311), So it is not required to look into the 313, 315 steps (Stock in trasfer, Removal and palce in transfer)
From the Suppling location these Material and Batch is reserved for some purpose(261 or 201) and these material may under Dynamic Availability Check, In this case even if you have the stock in Location if it is hard allocated for some other purpose you cant use this qty
Please check the above settings.
Thanks
Senthil P -
Transfer posting to special stock sales order with different material
I am able to MB1B a material (Transfer posting) using mvt 412 E and transfer from own stock to sales order stock ,where Sales order belongs to a different material.
It should not allow posting to a "E" stock to a sales order of different material. (anyway system allows that without any warning/error?)
MB1B:Only stock type change (within same storage location).Hi ,
I tried replicating your Query and observed it as a standard Behaviour
When you use 412 E for posting stock to sales order , system is not validating whether the Material is available in Sales order or
Material Check is only happening against the Plant and storage location but not at sales order level
if you want the check to happen, may be you can try to put a code in this Include
MGV_MATNR_LAMA_SAPLMATL which will Read the Material
regards,
santosh -
Restricting Transfer Posting for Reserved Stock
Dear Gurus,
I have a scenario that the user should not be allowed to transfer material (SLoc to SLoc) that has been reserved. At the moment the system is allowing without any warning or error. Is it possible and do I have to configure any settings for it?
Regards,Hi,
Contact your Basis team and lock the movement type 311.
Reards,
Mahesh Wagh -
Transfer posting from consigment stock to subcotracting stock
Hi friends,
Is there any way I can do ME2O form consignment stock or transfer consignment stock material to subcontracting stock. Which movement type should I have to use?
Regards,
Manuel NunezHello Manuel,
As far as I know, in the SAP standard system, there is no such functionality. You can check more details regarding what types of movements and transfers you can do with consignment stock at the online help in the following link:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/48/85e15dddfa3987e10000000a421937/frameset.htm
Sorry not being able to help you further.
Best Regards -
Stock Transfer of Blocked Stock Plant-to-Plant
Hi..
I have an issue regarding Stock Transfer of blocked stock from one Plant-to-Plant.
I realize that blocked stock cannot be transfered directly.
But the issue here is that if we cannot transfer the blocked stock directly, that means we have to do transfer posting from blocked stock to unrest use then stock transfer using mov type: 301. Then in the destination plant, we transfer again to blocked stock.
If this is applied, then it will potentially raise other issues related to incorrect stock transfer by the other users once the material is released to unrest. use.
So, in short, that's why we need to have direct stock transfer scenario for this issue.
Kindly have your assistance
Thanks in advance
AlbertHello Albert,
You are correct. We can not transfer blocked stock from one plant to another and you have to follow the same steps which you already mentioned.
As per the business logc, We can not move "Blocked" (Business term: Rejected/scrapped/spoiled) material out of our business unit except Retrun to Vendor or Scrap it. so it is also not logical to move "THAT kind of Stock" to another plant.
Hope this helps.
Regards,
Arif Mansuri
Reward if answer is helpful. -
Transfering Subcon stocks to Other Plant of same vendor
HI i need your help.
We are transfering to a new company code, new plant.
On old plant we have materials issued to vendor for subcon.
Is there a way to transfer those stocks to other plant of same vendor?
Can you also help me on this process (subcon)
to send the materials in vendor i have to create subcon PO first,
then transfer the materials of the assembly to vendor using what tcode and what movement type?
Im new to this..
regards,
NajahHello
Here both Plant are under same company code, no need to configure the clearing accounts.
During transfer posting ,
The inventory value of the plant (valaution area) Transaction event BSX will be reduced and same will posted in the stock account BSX of the other plant.
Entries will be :
Example
Valuation class Value G/L account
Plant 1 BSX 3000 -XXXX 300000
Plant 2 BSX 3000 +XXXX 300000
If both plants are in different company codes, then clearing accounts will comes into picture when you transfer post with 301 'O'.
Warm regards
Ramakrishna
Maybe you are looking for
-
We have Lync 2013, Exchange 2010 and several AD servers in mixed mode 2003/2008. All user are unable to see their own profile photo either in the main Lync window, in the settings or in a chat although other user can see that their photo is there and
-
I have a 64 bit pc but Flash player and plugin container seem to be 32 bit. Is this relevant ? The CPU goes up to 60% for just these two processes within about 3 minutes of streaming some videos. The system effectively dies until I end one of the pro
-
Tolerance for Tax Amount difference
Dear All, In certain cases the tax amount given in the invoice is different from the tax calculated by the system. Please help me, where to make the configuration so as to accept a difference of 0.05 INR between the calculated tax amount and the tax
-
Button actions not called.
I have a fairly complicated edt page (lots of data entry components and 3 tables) with a save and a reset button. Somewhere along the line the button actions stopped being called when I click a button in the browser. The buttons' Events-Action proper
-
Compliance Calibrator Design - Roles and Profiles
Hi guys,as you know SAP's authorization concept involves generation of Roles into Profile before it can be assigned to a User. In CC, i wonder why is there a need to segregate Roles and Profiles into 2 seperate functions. Isnt it already sufficient t