Transfer posting Quality to Quality within plant ..mov type 323...

Hi All,
I am not able to process Transfer posting Quality to Quality within plant with mov type 323 through MIGO transaction.
Error : Change the inspection stock of material 936317 in QM only.(Change the inspection stock of material 936317 in QM only
Message no. QA495
Diagnosis
You want to make a stock posting to/from the inspection stock. This is not allowed for material 936317 because the quality inspection control has been activated by QM.
The following cases can occur:
The inspection stock should be increased, although an inspection is not foreseen for the current goods movement
The inspection stock should be released, although you can only do this using the QM transactions.
System response
You cannot carry out the stock posting.
Procedure
Check both the QM inspection setup data and the movement type for material 936317 in the quality management view of the material master.
Exception:
If you post a return delivery to a vendor with reference to a purchase order, or cancel a goods receipt, the stock indicator from the order is proposed.
Check and modify this proposal as required.
The stock may have been transferred already and is therefore no longer in inspection stock.
Kindly help me to resolve the issue.

Hi,
Please check the stock of material 936317 in MMBE , One lot will be in Quality Inspection.
Clear the lot to unrestricted lot
try now you will be able to do Transfer posting Quality to Quality within plant ..mov type 323
G.Ganesh Kumar

Similar Messages

Error while posting batch managed stock in 107 movement type?

Hi All,
Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
regards,
Sanjana

Hi,
spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
107     SGTXT
107     WEMPF
Check here 107 mvt type there or not if not then put.
101     CUSTNAME
101     GRUND
101     SGTXT
101     WEMPF
102     SGTXT
102     WEMPF
103     SGTXT
103     WEMPF
104     SGTXT
104     WEMPF
105     SGTXT
105     WEMPF
106     SGTXT
106     WEMPF
107     SGTXT
107     WEMPF
108     SGTXT
108     WEMPF
109     SGTXT
109     WEMPF
110     SGTXT
110     WEMPF
Regards
Rakesh

Transfer posting stocks from quality inspection to unrestricted, problem

Hello Guys,
kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
please advise me the correct way to settled this.
thanks and regards,

Hello Guys,
I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
Regards,

How to list the transfer posting document from quality to unrestricted

hi experts,
i can get GR documents by using MB51
but how to get list of documents from quality to unrestricted and blocked to quality tranferpostings
thank you
ganesh

You can get all the Details in MB51 by Selecting Proper Movement types.
For Eg: Gr Docs using 101, GR Blocked Using 103 and GR Blocked Released using 105 etc.
Regards,
Ashok

Transfer posting from Non-WM manage plant to WM manage plant

Hi Guru,
I want to trasfer FG from storage location of Non-WM manage plant to storage bin of WM manage Plant. I did this posting with Movt type 301 , in destination section WM tab is activated for WM manage plant but after posting , its not generating TR no which is necessary for TO while posting material to bin. But material is showing in storage location of WM manage plant.
what to do in this situation? I want this finish goods be in destination bin of storage type.
regds
neeraj

As I understand in OMJJ WM fields are allowed for IM-mvt 301 and you define the storage type and bin when executing the goods movement in IM.
If the system directly posts the goods into the destination storge bin why do you need TR and TO?
If you do not want to post the goods directly into the storage bin (=you do not define the values for the WM-fields of mvt 301) then you have to check your settings in SPRO > LE > WM > Interfaces > IM > Define Movement Types.
Here you can set TR creation for the IM-mvt and then you can create TO by processing the TR from LB10.
You can find several threads how WM-IM interfaces should be maintained.

Post extra goods recieved with 501 movement type

Hello experts,
I have a requirement that after PO, at the time of MIGO if extra quantity is received from vendor then that extra quantity should automatically get posted in background with movement type 501 and the actual quantity will work as normal.
Like: if purchase order is of 100 quantity and quantity received from vendor is 150 then at present when i am trying to post error message is coming "quantity exceeded by 50 quantity" but I want this 50 quantity should get posted with 501 movement type automatically in background.
How should I do this??
Please help.

HI
Hi,
Is it possible if I ask abaper to debug the code and insert some code within.
Is it the right solution to insert programming lines within standard sap transaction code???
NOT possible
I have some question for you
1) What will be accounting posting for 501 it will same as 101 or different
it will different
2) system will generate two accounting document or one
If two how you will post MIRO ,because 501 not link with PO
Regards
kailas Ugale

Background posting in MIGO using 501 E movement type

Hi Experts,
I do have a requirement in which I have to post excess quantity to same batch , storage location and under same grid value by movement type 501 E after posting with 101 movement type is done.
I do need that after creation of a PO .
I have to do MIGO ,GR wrt PO by movement type 101.
Let PO Quantity(goitem-bsmng) be 100.
But when entered quantity in delivery note(150 ) is more than over delivery PO tolerance quantity(110) ,
then 110 should be posted as under movement type 101
and remaining 40 quantity should be posted to same storage location , batch and grid value under movement type 501 E and that too in background.
Any one if face the same situation , please help me out.
Thanx ,
Jeet
Moderator message : Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jul 25, 2011 4:51 PM

nilupriya wrote:
Hi Experts,
>
> Can you please brief me about the Accounting doc while using the 311 movement type. if there is involve the split valutation in internal purpose or external purpose.
>
> Regards
Hi Nilu,
See that Mvt 311 is trf betwn st.loc to st.loc, where the goods are not leaving any valuation area, hence there's no value change, which means Accounting Documents are not created as they are not necessary.
Hope its clear
Shiva

MB11/MB1C/MB1B post GL entry for tax for movement type 561 initial stock

Hi,
We want to bring in stock into new system using movement type 561. The usual account posting is:
Debit stock
Credit account in OBYC GBB
How can I add additional tax posting in the transaction? For e.g.
Debit stock
Debit input tax
Credit account in OBYC GBB
I tried to open up the Tax Code in the movement type field status but it doesn't show up in any of MB11/MB1C/MB1B.
Any customized BAdI/user-exit for this?
Any suggestions?
Thanks in advance for help!

hi,
you cant update the tax account directly using the 561 mov type.
please find below the link for more clarifications regarding the tax accounts.
http://forums.sdn.sap.com/thread.jspa?threadID=2126200
Regards,
velu

Stk posting change for Material received in movement type 101

Experts,
A material received in Mov type:101 / Inspection type : 01 and rejected during Inspection was posted in To Reserves instead of Return Delivery.
How to change the posting to Return delivery stock from Reserves stock.
Regards,
RPV.

Dear,
First check reservation is created against reserv stock of material.
You can check reservation with MB23.
If yes than delete it first and than create return delivery for material with MIGO.
Regards,
Mahesh Wagh.

Posting the account doc for the movement type 311

Hi Experts,
Can you please brief me about the Accounting doc while using the 311 movement type. if there is involve the split valutation in internal purpose or external purpose.
Regards

nilupriya wrote:
Hi Experts,
>
> Can you please brief me about the Accounting doc while using the 311 movement type. if there is involve the split valutation in internal purpose or external purpose.
>
> Regards
Hi Nilu,
See that Mvt 311 is trf betwn st.loc to st.loc, where the goods are not leaving any valuation area, hence there's no value change, which means Accounting Documents are not created as they are not necessary.
Hope its clear
Shiva

Transfer Posting Unrestricted to Quality Stock

Hello friends,
I need to move the stock from Unrestricted to Quality Stock. I dont want to use Movt. 322 as it is reversal of 321. Is there any other way out?
Regards,
Navin

Hi Navin
322 mvt is the better option. 322 is not only reversal of 321. also this will be used in many occassions to bring stock from Un restricted to Quality Inspection. for example in recurring inspection (09 inspection type), material will move from Unrestricted to Quality Inspection with 322 mvt type only.
Can you please explain why you dont want to use this mvt type tp bring stock to Quality Inspection?
regards
Srinivas

While doing MIGO transfer within plant batch no should not be changed.

Dear All,
While doing MIGO transfer within plant (movement type 311), any user is able to change the batch and can assign new batch no.The process is as under.
T.Code-- MIGO
M.type --311
Go in Transfer posting tab.
In "From selection",
Select Material and that material will be displayed in Destination selection automatically and can't be change.
Select Plant and that plant will be displayed in Destination selection automatically and can't be change
Select Storage location(from where material to be transfered) and we have to select storage location in "destination selection" where material is to be transfered.
Same way Select Batch No in from selection and indestination selection batch is not coming automatically and we can give any batch no.So we do not want to allow this change and the batch no must remain same as selected in "from selection".
Now how can i solved the problem and please suggest is there any role of abapers in this case and if yes then which concept we have to followed.This is standard program of sap so access key may be needed.So please guide me on above topics.
Regards
Shivam Pastagia.

Hi Sivam,
Sorry for asking the question to this old thread but I am having the same problem.
My requirement is also to populate the destination batch same as From Batch without allowing the user to change it.
Can you pleae let me know how did you solve it?
Regards
Narottam

BAPI_GOODSMVT_CREATE error - Duplicate Transfer Posting

Hello,
I'm using BAPI_GOODSMVT_CREATE for transfer posting with GM Code 04 and Movement Type 311.
But the posted material document is incorrect. Instead of 2 lines only, the line items becomes 4.
Could anyone please help me?
Thanks in advance!

Hi Gold Yap,
      I have done the Transfer posting by using BAPI_GOODSMVT_CREATE.
     Below i added my sample code. Please go through.
Report XYZ.
TABLES : mslb , mchb .
DATA : BEGIN OF i_stock OCCURS 0 ,
       matnr LIKE mslb-matnr ,
       werks LIKE mslb-werks ,
       charg LIKE mslb-charg ,
       sobkz LIKE mslb-sobkz,
       lifnr LIKE mslb-lifnr ,
       lblab LIKE mslb-lblab ,
       END OF i_stock .
DATA : BEGIN OF i_batch OCCURS 0 ,
       matnr LIKE mchb-matnr ,
       werks LIKE mchb-werks ,
       lgort LIKE mchb-lgort ,
       charg LIKE mchb-charg ,
       clabs LIKE mchb-clabs ,
       END OF i_batch .
DATA: BEGIN OF it_mess OCCURS 10,
      charg LIKE mslb-charg ,
      lgort LIKE mchb-lgort,
      lifnr LIKE mslb-lifnr,
      err LIKE bapiret2-message,
      flag,
      END OF it_mess.
DATA match.
DATA : header LIKE bapi2017_gm_head_01 . "OCCURS 0 WITH HEADER LINE .
DATA : code LIKE bapi2017_gm_code . " OCCURS 0 WITH HEADER LINE .
DATA : item LIKE bapi2017_gm_item_create OCCURS 0 WITH HEADER LINE.
DATA : i_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE .
DATA : matdoc LIKE bapi2017_gm_head_ret .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME .
SELECT-OPTIONS : s_matnr FOR mslb-matnr .
PARAMETERS : p_werks LIKE mslb-werks DEFAULT 'TPFB' .
SELECTION-SCREEN END OF BLOCK b1 .
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
    IF screen-name = 'P_WERKS' .
      screen-input = '0' .
      MODIFY SCREEN .
      CLEAR screen .
    ENDIF.
ENDLOOP .
START-OF-SELECTION .
CLEAR: i_stock[],i_stock.
CLEAR: it_mess[],it_mess.
CLEAR: i_batch[],i_batch.
SELECT matnr werks charg sobkz lifnr lblab
FROM mslb INTO TABLE i_stock
WHERE matnr IN s_matnr
    AND werks = p_werks.
DELETE i_stock WHERE sobkz <> 'O'.
DELETE i_stock WHERE lblab <= '0.000'.
IF i_stock[] IS INITIAL .
    MESSAGE 'NO Data Available In MSLB Table' TYPE 'S' .
ELSE.
    DELETE i_stock WHERE charg = 'COMMON' .
    IF i_stock[] IS INITIAL .
      MESSAGE 'Already Transfer Posting to Common Batch' TYPE 'S' .
    ENDIF.
ENDIF .
SELECT matnr werks lgort charg clabs
FROM mchb
INTO TABLE i_batch
WHERE matnr IN s_matnr
    AND werks = p_werks .
DELETE i_batch WHERE clabs <= '0.000'.
IF i_batch[] IS INITIAL .
    MESSAGE 'NO Data Available In MCHB Table' TYPE 'S' .
ELSE .
    DELETE i_batch WHERE charg = 'COMMON' .
    IF i_batch[] IS INITIAL .
      MESSAGE 'Already Transfer Posting to Common Batch' TYPE 'S' .
    ENDIF.
ENDIF .
CLEAR : header,code,matdoc .
header-pstng_date = sy-datum.
header-doc_date    = sy-datum.
header-pr_uname    = sy-uname.
header-header_txt = 'Transfer Posting'.
code-gm_code       = '04'.
SORT i_batch BY matnr werks charg.
LOOP AT i_batch.
    CLEAR: item[],item.
    item-material        = i_batch-matnr.
    item-plant           = i_batch-werks.
    item-batch           = i_batch-charg.
    item-entry_qnt       = i_batch-clabs .
    item-stge_loc        = i_batch-lgort .
    item-move_type       = '309'.
    item-move_batch = 'COMMON'.
    APPEND item .
    CLEAR item .
    match = 'X'.
    PERFORM bapi_run USING match.
ENDLOOP.
LOOP AT i_stock .
    CLEAR: item[],item.
    item-material        = i_stock-matnr.
    item-plant           = i_stock-werks.
    item-batch           = i_stock-charg.
    item-vendor          = i_stock-lifnr .
    item-entry_qnt       = i_stock-lblab .
    item-move_type       = '309'.
    item-spec_stock      = 'O'.
    item-move_batch = 'COMMON'.
    APPEND item .
    CLEAR item .
    match = 'Y'.
    PERFORM bapi_run USING match.
ENDLOOP.
IF i_stock[] IS NOT INITIAL OR i_batch[] IS NOT INITIAL .
    IF it_mess[] IS INITIAL.
      MESSAGE 'Transfer Posted Successfully' TYPE 'S' .
    ELSE.
      SORT it_mess BY charg err.
      WRITE:/2 'Batch',11'Location',20'Vendor'.
      LOOP AT it_mess.
        AT NEW charg.
          SKIP.
        ENDAT.
        IF it_mess-flag = 'X'.
          WRITE: /2 it_mess-charg COLOR 6, it_mess-lgort COLOR 3
                 INTENSIFIED OFF,it_mess-lifnr COLOR 2 INTENSIFIED OFF.
        ENDIF.
        WRITE: /10 it_mess-err.
      ENDLOOP.
    ENDIF.
ENDIF .
*&      Form bapi_run
      text
--> p1        text
<-- p2        text
FORM bapi_run USING match .
CLEAR: i_return[],i_return.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = header
      goodsmvt_code   = code
    TABLES
      goodsmvt_item   = item
      return          = i_return.
IF i_return[] IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
ELSEIF i_return[] IS NOT INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    LOOP AT i_return WHERE type = 'E'.
      it_mess-charg = i_stock-charg.
      IF match = 'X'.
        it_mess-lgort = i_batch-lgort.
      ELSEIF match = 'Y'.
        it_mess-lifnr = i_stock-lifnr.
      ENDIF.
      it_mess-err   = i_return-message.
      IF sy-tabix = 1.
        it_mess-flag = 'X'.
      ENDIF.
      APPEND it_mess.
      CLEAR it_mess.
    ENDLOOP.
ENDIF.
ENDFORM.                    " bapi_run
Regards,
S.C.K

Transfer posting vendor to vendor

dear consultant
Transfer posting vendor to vendor at which movement type using & T code
please guide
regards
mahesh

Hi Mahesh ,
No such movement exists .
What exactly is your business scenario ? Explain in detail.
Regards
Ramesh Ch

Accounting doc for the movement types

hi gurus
i want to know the accounting documents created while we transfer posting the stock in all possible movement types. and also tell me how many accounting documents created per transaction.
regards
Ram
09486627305

go to MB03 and enter the material document no and go inside go for finnancial document there in you can see the acc documents for that material document.
Only one acc document created for each material movement which are subject to account postings.
or try MB51 list of material documents once you run the list there in you can chaeck the FI document for each material document nuber dispalyed in the list.
Regards
Sujoy

Transfer posting Quality to Quality within plant ..mov type 323...

Similar Messages

Maybe you are looking for