Transfer posting to block stock through quality notification

Dear QM Experts,
I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
1.     Material is batch managed
2.     Storage location is managed by warehouse management and has storage bin.
3.     Material has split valuation
When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
I would be grateful, if someone can throw some light on this.
Thanking you,
Anand Rao

Which valuation category do you use in material master accounting view?
In my experience..
Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
Anyway try below..
At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
I'm not sure why your batch master does not have a valuation type.
Regards
Luke

Similar Messages

  • QM_move stock to block stock through Q2 notification type

    Dear QM Experts,
    u2022 I am creating quality notification type Q2 through QM01
    u2022 After doing necessary defect entry I want to post the defective material to block stock.
    u2022 For this I am using action box transfer posting unrestricted to block.
    u2022 By doing this material can be transferred to block stock of the same storage location
    Requirements,
    u2022 Is it possible to move the material to block stock of another storage location?
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    u2022 What type of setting needs to be done to achieve this effect?
    Thanks
    Anand Rao

    Hello
    u2022 Is it possible to move the material to block stock of another storage location?
       In notification action box you have the option of transferring the material from unrestricted to  block. In that you have the option inputting the storage location to which you want to transfer
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    - As said this can be done through a development or other option is that you can choose the same action box( Transfer  unrestricted to block ) and change the movement type to 311. It will allow to move material from  one storage location to another
    another solution is that you can use tak with followupaction as Goods movements. its available in the standard. when u save the notification it will take you to transfer posting but wherein you will have to key in all the details
    u2022 What type of setting needs to be done to achieve this effect?
    Its available in the action setting in the configuration of notification. you will surely require ABAP help

  • Delivery Block through Quality Notification

    Friends,
    Can you explain me the procedure and delivery block? (Integration with SD)
    Is it possible to block delivery through Quality Notifications?
    Pl. guide........

    hii sandy,
    Why do you want to block delivery through Notification only?
    pls illustrate, there might be some alternative solution.
    By the way;
    If you want a control over SD, for delivery you can use Control key 0005 in QM material master for a material. assign inspection type 10.
    you will get Insp. lot after Outbound Delivery creation by SD, and unless and untill you clear that insp. lot SD cant do PGI (Post goods Issue).
    regards,
    Amol

  • Able to post Invoice for Blocked stock from quality

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to  create  MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Please help
    Thanks
    Samuel

    Dear Jurgen
    Thanks for the reply,  master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
    Is there any normal config setting to stop it form geting picked during MIRO.
    Thanks

  • Stock posting in block stock after grn for source inspection

    Hi All,
    I have following scenario
    I am doing source inspection at vendor site i have maintained control key 0005 in material master & necessary certificate with certificate check required at GRN & UD stage
    i am creating a source inspection lot for a release po through t.code qi07 & then processing that lot before GRN
    Now when i am doing GRN for same PO it is giving me the following message  stage
    <b>A category ZC01(user sp. category) inspected certificate is required</b>
    Message no. QA312
    Diagnosis
    An inspected certificate must exist at the first goods receipt for a purchase order item.
    Procedure
    Check whether a suitable certificate exists for the purchase order and delivery, and create a certificate record with the status "Certificate checked and stored".
    If there is no certificate or no suitable certificate, this does not comply with the requirements in the material master record. If there is no inspection lot for this goods movement, the system posts the quantity to blocked stock or does not post the goods receipt.
    If you have created an inspection lot, the system marks the certificate check with the status "In lot". You must confirm the availability of an inspected certificate by the time you make the usage decision.
    after doing the GRN stock is being posted to block stock
    if i do not process the source inspection lot then the stock is posted to quality stock but this does fulfill the requirement of source inspection
    plz suggest soultion
    It's urgent
    Regards
    Ashutosh Shende
    9860681314

    Hello Ashutosh,
    In the material master you have defined certificate type with the customizing setting indicator for  'Enhanced Certificate Processing' active.
    If you set this indicator, extended certificate processing is active for
    this certificate type. You can then manage the inbox for quality        
    certificates independent of the goods receipt.                          
    The electronic inbox of certificates for the purchase order is only     
    possible if this indicator is set.                                                                               
    This means you have to create a certificate in QM (Transaction QC51),   
    before you can update your PO with cert. enclosed.  
    If you do not want the enhanced certificate processing you have change  
    the indicator into inactive.    
    Another problem known here is if you have activated the 05 Inspection type in the material master, that it is not activated in all plants relevant although QM in Procurement is set in all plants.                                        
    I hope that this resolves the described issue.
    Regards,
    Isabelle

  • Transfer Posting of Restricted stock Plant to Plant

    Hi,
    How to do transfer posting of restricted stock Plant to Plant
    Kunal

    HI
    One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
    2 step process is 303 and 305
    From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101

  • Transfer posting of subcontracting stock with mvt type 541 from project stk

    Hi,
    we run project MRP and the requirement is raised for subcontracting item also ,after converting the PR into PO when I try to transfer post material in MB1B using 541 ,system shows Error Purchase order does not contain any item even I have  material in my project stock,what may be the reason?
    Regards
    Kantha

    Hello Kantha,
    The components which you provide for a vendor are manged in a vendor-related special stock, O. This stock is updated at plant level, becuase material is actually not in your plant. If you want to provide stock to vendor the avialble stock types in subcontracting are from un restricted use and in quality inspection.
    When you provide componets to vendor via transfer posting this needs to go from only unrestricted use stock to the stock of material provide to vendor movement type is 541.
    So to execute the transfer posting for the stock of material provided to the vendor, you have to specify special indicator O, if not the transfer posting will not differ from normal transfer posting.
    Also T-code MBLB will help you in evaluating the stock of material provided. So you need to transfer the stock from project stock to unrestricted stock to carry out the transfer.
    Br,
    Tushar

  • Block for payment in MIRO if there is blocked stock in quality inspection

    Hi all,
    In quality inspection, if they put some quantity into blocked stock, then i should go for payment block in MIRO . Here
    the QA status may be Pass or Fail.
    my payment block will depend upon blocked stock in quality inspection but not on QA status.
    Thanks
    babu

    Hi Pabitra
    If the material is taken to QI, then no liability is created for the vendor during GR. Now if you pass it in QA, then the stock moves to Unrestricted stock. Now if you transfer from Unrestricted stock to blocked stock, this will not block MIRO, as the GR/IR has already been hit.
    if you bolck payment for these type stock, then you can take help of User Exit, in MIRO
    Regards

  • Vendor Return Delivery through Quality Notification.

    Hi Experts,
    I m doing vendor return delivery through quality notification with action box , after giving PO NO. & Material document no we are getting the  following error
    1) Could not create return delivery
    2) Deficit of PU IR quantity 2.000 EA
    For the GR based IV reversal after IR tick is not active.
    Kindly suggest possible reason for the same
    Thanks & Regards
    Rajesh

    Hi
    There is deficit of Quantity i.e the quantity lying in stock is less than 2. and secondly for GR based invoice verification the IR tick should be there in PO in Invoice tab.

  • Blocked Stock to Quality

    Dear all,
    Material is quality managed. I recieved the items and out of total 100 Nos , 50 Nos are moved to Unrestricted and balance 50 are moved to blocked stock thru usage decision in QA11.
    Now I want bring the 50 Nos in Blocked stock to Qualtiy or Unrestricted.. Is there a way ? (Now the blocked stock are checked again by quality and found them Ok)
    Is there any way we can edit the usage decision transaction ? Or usage once made is final ?
    Appreciate your help.
    Regards
    Banniar

    hi
    you can post the blocked stock to unrestricted stock using MB1B using 343 movement type .
    or cancel the inspection lot and cancel the PR by using movement type 102 ,then again do the GR for PO and make the usage decision
    regards
    thyagarajan

  • Sales Return through Quality Notification

    Hi Guru,
    when i am creating return sales order through quality notification I am not getting material by default in sales order screen.
    Can anybody help in resolve this issue.
    Santosh

    How do you proceed to create return sales order through notification?
    If using action item which is developed with 'Z~' function module, you have to ask your ABAPer.
    Check function module in configuration.
    SPRO > Quality Management > Quality Notifications > Notification Processing > Additional Notification Functions > Define Action Box > efine Functions for the Action Box
    Regards
    Luke

  • Movement type 453 (Transfer posting to own stock from returns from customer

    Hi all,
    I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
    it picking from from profit center from in material master under  sales:general/plant tab   but we need picking from based on account assignment group  in the material maser sales org.2.
    Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
    K.Satish

    Hi,
    In Co controlling are the automatic account assignment is only the default and it on the Priority.
    if you think what is picked up from the mm is wrong.
    the best way out will be to go with the substitution  rule.
    based on the movement type use the rule.
    hope this is clear , assign points.
    With regards
    Krishna

  • Block stock or quality inspection

    Hi,
         We usually block the stock through MB1B 321/322 or 343/344 movements types. But we cant indicate warehouse number and storage type:
    example: We have two units:
    Material A
    Batch: 1
    Quantity 2
    Storage type 010: 1 unit
    Storage type 011: 1 unit
    We need to block or put in quality control just 1 unit. We go to MIGO and we indicate:
    Material: "A"
    Bacth: 1
    Quantity: 1
    Movement type: 343.
    But we can not indicate that we want to block just the unit on the 010 storage type or 011.
    How can i do it? Through wich tcode?
    Thanks in advance for the help.
    Regards
    Enzo

    Hi
    When you perform the MB1B in IM you shou;ld create a Posting Change Notice in WM (this is a setting you should maintain in OMLR) you will also create a negative and positve in interim st type 922
    If you are blocking stock you will have a negative of unrestricted stock and a positive of blocked stock
    You will find the Posting change notice in LU04 (you can set the system to call the WM transaction immediately also in OMLR)
    You them create the TO for the PCN and specify from where you want to block the stock and the system will move the correct quantity of unrestrictede stock to 922 and move the stock in 922 to the bin where the unrestricted stock was and the process is cmp;lete (The TO will need to be confirmed and can be set to confirm automatically)
    This will correct the stock
    The system cannot 'assume' which bin you want to block the stock in and so you use the PCN, Just like a TR
    I hope that this helps
    Frenchy

  • Blocked stock to quality insp stock type

    Hi, scenario is as follows: received 10 qty of certain roh material from vendor. 8 has been accepted 2 kept in blocked stock. now vendor came to our company and he reworked those 2 blocked / rejected qty and checked by our quality dept and found ok and kept in unrestricted stock. pls advise how to map the above. how to move the 2 rej qty from blocked to quality stock, how system generates insp lot and how to process this. thanks a lot for your support.

    Hi,
    Just avtivate inspection type for your material ,
    MB1B transfer stock posting with movement 349 .Once you do that  new lot will get generated with inspection origin 08 .Now for this new lot you can give result recore & usage decision & again post it to as per your requirement.
    regards
    SANIL

  • Goods receipts blocked stock and quality inspection

    Hi,
    we want to create an inspection lot for an initial sample automatically as the goods receipts is posted. At the same time we don't want the amount to appear in the normal quality inspection stock or in the normal blocked stock but instead it should be posted in the goods receipt blocked stock.
    Is it possible to post it automatically to the goods receipts blocked stock?
    Is it possible to create an inspection lot automatically for this?
    Thanks,
    Marcus.

    This isn't something that is straight forward, like just running a report.
    You have to look at the field QALS-LMENGEZUB which is the quantity to be posted of he inspection lot.  Keeping in mind that you can have multiple inspection lots for the same batch, you'd have to get all qals records for the batch you are interested in.
    You then have to compare all the related MCHB records for the material and ln that table sum all the values in field CINSM.
    That should show you any inconsistencies between the MM and QM.
    I am assuming this is for batch managed, non-HU managed materials.
    If not, let me know and we'll take another crack at it.
    FF

Maybe you are looking for