Transfer Posting Unrestricted to Quality Stock
Hello friends,
I need to move the stock from Unrestricted to Quality Stock. I dont want to use Movt. 322 as it is reversal of 321. Is there any other way out?
Regards,
Navin
Hi Navin
322 mvt is the better option. 322 is not only reversal of 321. also this will be used in many occassions to bring stock from Un restricted to Quality Inspection. for example in recurring inspection (09 inspection type), material will move from Unrestricted to Quality Inspection with 322 mvt type only.
Can you please explain why you dont want to use this mvt type tp bring stock to Quality Inspection?
regards
Srinivas
Similar Messages
-
Transfer Blocked stk to Quality stock & then post some quantity to sample
Hi all,
For one material, there is blocked stock. now user want , part of this stock to post to quality stock .
After the stock came to quality, they want to post some quantity to sample also. can anybody tell me
how i can achieve this ?
Thanks
pabiHello,
To post the stock from block stock to quality stock you can use movement type 349
Go to MB1B.
Enter movement type as 349, plant as per your setting and storage location.
Now press enter and enter the material and save. This will move stock from block stock to quality inpscetion stock
Now to issue stock for sampling you have to use movement type 331 in T-code MB1B
Br,
Tushar -
Transfer from unrestricted to quality
Dear Gurus,
I have a scenario that sometimse I need to transfer a certain quantity in the unrestricted stock to quality inspection stock and perform inspection to it.
I tried to transfer the quantity from transaction MIGO, but it didn't allow as quality is active on the material.
Keep in mind that this is not the case of recurring inspection, it is random.
How can I handle this issue?
Regards,
MaXHi
I will try to answer your question based on the little information provided by you.
As you have posted the stock already to the Unrestricted you can reverse the stock to quality using OSS note 175842.
Again if you do not want to reverse the inspection stock posting and ur business scenario allows you to create new inspection lot then you can use stock transfer inspection. Transfer posting ( Storage location to storage location) but create a Z movement type so that it will not effect your daily storage location transfers. Activate material for 08 Stock transfer inspection or new variant of 08, in QM view.
Post the material using MIGO
Regards,
Nitin -
Movement type setting to control blocked, unrestricted or quality stock
Hi All,
I am trying to find out what exact setting within a movement type controls whether the material goes in to unrectricted, blocked or quality stock. For example 101 and 103. Movement type 101 receives the material in to unrestricted stock while 103 takes it in to blocked stock. I compared 101 and 103 settings and found them to be similar. So I am trying to understand what exact setting seperates these movement types.
Regards,
KetanChecking in OMJJ is probably waste of time, as you cannot change such indicator.
As you probably know, you can only create new movements by copy of an exisitng movement, so you cannot really change the behaviour of a movement.
If you want to investigate in more detail, then check the enties in tables starting with T156 -
Movement type for transfer posting wbs to normal stock
which movement type used for asset trasferred from wbs(special stock) to normal stock
Dear,
i hope u have created asset as a material,
trasferred material from wbs(special stock) to normal stock--310 Q(Transfer posting project material to material - reversal)
312 Q(Transfer posting stor. loc. (one-step) - project - reversal).
Regards,
Gopala.S -
How to list the transfer posting document from quality to unrestricted
hi experts,
i can get GR documents by using MB51
but how to get list of documents from quality to unrestricted and blocked to quality tranferpostings
thank you
ganeshYou can get all the Details in MB51 by Selecting Proper Movement types.
For Eg: Gr Docs using 101, GR Blocked Using 103 and GR Blocked Released using 105 etc.
Regards,
Ashok -
Automatically Transfer from unrestricted to quality after oneyear
Hi expert
i have requirement that after every one year from the GRN i want the materiel goes to quality check automatically. now i am doing manually by Movement type 322.
regard
nabilQA07 can do this job. Precondition is either a shelf life date or a recurring inspection method in material master
-
Transfer posting for sales order stock questions. Propose BOM components?
Hello
We are working with a third party subcontracting scenario (SD item category TAB/sched line CB), where a Subcontracting PO (item cat L/acc assign M) gets generated.
At MB1B, I perform a 412E movement to issue components to a sales order.
When I issue components to the sales order, I need to manually enter the component and quanity. I would like the system to propose the component quantity, similar to when I do a movement 541 to a subcontractor.
Is this possible? Any advice would be greatly appreciated !!!
Regards
KenHi
Goto Transaction Code, VOV6--> Choose Sch.Line catagory, CB> Go in to detail--
>There you maintain PR Doc.Type as NB, Acc.***.Catagory as "M" and Itemcatagory as "L",then after completing the sale order, Automatically PR will be created with item cat L and acc assign M ....
Then create PO by refering this PR...
(Before that make sure that you have maintained the link bet. Acc.***.Catagory as "M" and Itemcatagory as "L" in OLME-->Accout Assignment--
> Define combination of Acc.***.Catagory and Item catagory
and also In OLME-->Purchase Requisition---->Define document types -
>you have to maintain the link for converting this PR into PO...)
If you have already maintained BOM, then in PO---> Material data tab---> the BOM will be automatically exploded.
Then you can issue these items to SC Vendor in Transaction code. ME2O
Hope I have cleared your doubts
Reward if useful
Regards
S.Baskaran -
Transfer posting to block stock through quality notification
Dear QM Experts,
I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
1. Material is batch managed
2. Storage location is managed by warehouse management and has storage bin.
3. Material has split valuation
When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
I would be grateful, if someone can throw some light on this.
Thanking you,
Anand RaoWhich valuation category do you use in material master accounting view?
In my experience..
Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
Anyway try below..
At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
I'm not sure why your batch master does not have a valuation type.
Regards
Luke -
Hi Experts,
Can you tell me how we can how we can ditinguish unrestricted stock and qualiy stock in APO
In our sceneraio, Right now Business able to issue un restricted stock and quality stock both, thts problem
User able to issue both unrestricted and quality stock as well, thts part of problem
We don't want to users to use Quality restricted stock.
Can we do something in GATP to block stock for quality inspection.
Is there any way we can include Quality inspection in APO
Thanks in Advance
Thanks
SunilSunil
The different types of stock in APO can be distinguished using stock categories. As per standard APO, the unrestricted stock will have category CC , the stock in quality inspection will have category CF (i think that is what you are referring to as quality stock).
If you go to /n/sapapo/rrp3 and view a material branch, that carries both unrestricted and quality stock, then you can see that they appear under different categories (CC and CF). To exclude quality stock from your planning / GATP all you have to do is go to the category group ST1 and remove CF from that category group. But remember this will have impact on all materials and hence is a very critical change .
Thanks
Aparna -
Return delivery (122) after transfer posting
Is there way to do a 122 movement against a GR after you've done a transfer posting? Let's say I had a goods receipt for 10 items to plant 100. I then transferred those items to another plant (say 120.) If I discover than an item is bad and I need to send it back can I do the 122 from plant 120 since the original GR was down into plant 100? Do I first need to reverse the transfer posting to get the stock back to plant 100? We're trying to avoid that if possible.
Thanks!Hi,
The way you are processing is correct.
We can not send it back to vendor from Plant 120, since the Material was recevied from from vendor with respect to the PO for Plant 100.
Physically you may send it to vendor from plant 120 directly....
But in sytem , we have to follow these 2 steps..and the goods return note/rejection note should go to vendor from Plant 100.
Thanks,
Kumar arcot -
How to pick quality stock for a delivery in WM
Hi All,
I am working on a scenerio wherein stock is to be picked from unrestricted and quality stock type, wherver available. It has been acheived by making setting in availability check control "Include Quality Stock".
The scenerio and the issue is-
The storage location is WM linked. For testing I maintained stock only in Quality . While creating delivery for a sale order, the batch got determined which belongs to quality stock. But when I do LT03 for the delivery it tries to pick the stock from unrestricted use in WM.
How to make system search the stock in the Quality in WM.
Thanks in advance
VinodHi bmemq,
You can do this with the Equal? function found in the Comparison palette. You would have one Equal? function for each index that you're interested in- one input would be a constant of that number and the other input will be the index terminal of the for loop. Next, you can you a Compound Arithmetic found in the Boolean palette. The number of inputs of the Compound Arithmetic can be expanded to match the number of indices that you're interested in, and each input will be the output of an Equal? function. Finally, the output of this Compound Arithmetic will be in the input of the selector in a Case Structure where you will have a true and false case to toggle the Boolean.
Josh Y.
Applications Engineer
National Instruments -
Transfer posting stocks from quality inspection to unrestricted, problem
Hello Guys,
kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
please advise me the correct way to settled this.
thanks and regards,Hello Guys,
I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
Regards, -
Mass Transfer Posting From Quality Stock to Return Stock with FI Effect
Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
DarveshHi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document -
Weird Problem in QM stock posting from Quality Stock to Unrestricted
Hi all,
Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
for this material and puts the stock in to Quality stock (I checked in MMBE).
Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
Sorry for the long post. How to correct this? Please help me!
Thanks in advance,
VinodhI don't know why this happenned. Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on. That is usually greyed out and is set by having an inspection type activated. You can't manually set that once an inspection type is added. But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
I would try to first clear all your inspection lots first.
Then delete all the inspection types from the material. And I mean actually go in and delete them.
Then use QA08 to reactivate the ones you need.
Then see if this solves the problem.
FF
Maybe you are looking for
-
Apps don't work after upgrading to iOS 5
After having my new iPad 2 to iTunes, answered one million questions, upgraded to iOS 5 and restored my content, MY PAYED FOR APPS DO NOT START, ANGRY BIRDS ALL VERSIONS, GARAGE BAND, SKYPE ETCETERA. I am SOOOOOOO frustrated overklig tjis. I have PAY
-
i am trying to install os x on macbook pro and it keeps saying mac os x computer, and i don't have any backup to restore
-
Why No Face Detection for Mobileme Gallery?
I know to perform face detection, i goto Events, select a photo, then click the "Name" icon on the bottom toolbar, type in the name, and iPhoto will take care of the rest. But when i open the Mobileme galleries in iPhoto and select photos, there is n
-
Eth0 connectivity depends on eth1 being plugged in?
The problem is that if I pull the plug out on eth1 (PCI) then eth0 (onboard) connectivity stops. If I pull eth0 then eth1 continues to respond, while eth0 does not. I have seen this now on two different machines, so it seems to me to be a 'feature' o
-
FORMS APEX communication through Advanced Queuing
Hi there, I have to prepare a proof of concept for an APEX application and the customer asked me if it is possible to establish a communication between FORMS and APEX besides using an URL call. Would the usage of Advanced Queuing be a good practice f