Transfer Posting with MIGO.

HI,
I need to do a transfer posting to post some of the materials using 541 mvt to my Subcontracting Vendor. When i am able to do it with MB1B , i am able to access with reference to PO whereas in the enjoy transaction ( MIGO ) with Transfer posting, i am able to see only reference documents such as material document, Reservation and Others.
If i want to add one more reference to the Transfer posting function how to go about.
Please expedite.
Regards,
RitiG

Hi RitiG,
                                                                                Unfortunately, as you have seen, the only two available references to post a Transfer posting with MIGO are 'Others' and 'Reservation'.
This is, it is not possible to post a transfer posting in MIGO with reference to a Purchase Order. This is the standard behavior and it cannot be customized.
If you wish this option to be available to transfer stock to your subcontracting vendor (using the movement type 541), then, you will need to make this posting via the business transaction 'A08 Transfer posting' - 'R10 Others', but then you will not have any reference to the Purchase Order.
Alternatively, you can use transaction ME2O, which uses this reference to the Purchase Order, or you can continue using MB1B.
Best regards,
Esther

Similar Messages

Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

Hi,
I am working with MTO scenario.
I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
Below steps are being follow:
Scenario is MTO ( special stock subcontracting)
1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
2. RM code - 61, available stock 100 TO & batch no.0000000127
3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
5. Item Data details tabs are blank.---This is the issue / error.
Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
Please have a look on attachment for SAP screen issue.
Regards
Mohit Jaiswal

Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

How to transfer posting with reference to Subcontracting Order?

Hi, Experts,
Regarding to the SAP SCM510 handbook, in the section of subcontracting,it mentions 3 ways to post the provision of components from own company to stock for vendor:
1.) Transfer posting with reference to subcontracting order
2.) Monitoring of Subcontracting stock(using t-code ME2O)
3.) Transfer posting without reference to PO(using movement tyep 541 + O)
For the items 2 and 3, I can understand the processes but for item 1, I don't know how I can perform Transfer posting with reference to subcontracting order? Anyone can explain me on the processes?
Thanks in advance.
Fanghua

Shetty,
Thank you for your help. I am really a new SAP learner. I wasn't aware of the transaction code MB1A, MB1B and MB1C etc. But I tried the way you mentioned, it works.
My initial conern on this is really from the Enjoy transaction - MIGO. I tried to select the tranaction - Transfer Posting but it doesn't have Purchase Order(or subcontracting Order) as reference.
How can I transfer posting with reference to subcontracting order in the transaction - MIGO?
Thanks.
Fanghua

Populate Tax Code in RKWA table while doing transfer posting through MIGO.

Hi All,
I have a requirement where for certain countries i have to pass the tax code to RKWA table while doing Transfer posting through MIGO transaction.
For certain countries which i have to pass the Tax code to RKWA table, basically will not be having the tax code. For this reason im looking for BADi/User exits where i can update the RKWA table with the tax code. If the tax code is not derived, im getting the error as 'No tax information found'.
Please suggest if any BADi/exits are available for this requirement.
Regards,
Santosh

Check the following SAP notes:
139176
579241
Regards,
Indranil

Similar with FB05,how should i process 'transfer posting with clearing'?

Hi my friends,
     Customers provide an excel file that contains detial of invoices paid(Doc No, Customer No, Invoice No, Payment Amount), then i need to implement FB05 Function and transfer posting with clearing.
      I'd like to use FM 'Posting_interface_clearing', but i am not clear how i should set two parameters: payment amount and rfopt-xrptz ( editing options->open items -> enter payment amount for residual items ).
     I refer to Program RFBIBL00, and who tell me how to fill value in the two table FTPost and FTClear.

hi,
use rfbibl00 with tcode FB05 and structueres <b>BSELK and BSELP</b>
-> look documentation with se38 to that report
A.

Bapi for Transfer posting with clearing

Hello,
please let me know the bapi for Transfer posting with clearing for transcation F-04 or FB05.
quick reply wil be helpfull.
Thanks,
ram

Hi
I don't know in release greater than 4.7, but there isn't that BAPI.
There's a BAPI to post a document, but the clearing is an internal transaction so I don't believe there's a BAPI for it.
Anyway you can try to create one using the std BDC RFBIBL00: it suppoerts that transaction.
Max

F-30 authorisation with transfer posting with clearing only

Dear Gurus,
In transaction F-30(posting with clearing), I want to give a user authorisation only for transfer posting with clearing.
that is, i do not want him to use outgoing payment, incoming payment and credit memo options but use the option posting with clearing only.
other users can use all options.
Pl let me know how this is possible.
Regards,

Hello,
Try using Screen variant and assign to that particular user or else use a User Exit which will immediately come out of the screen if that user tries to use any other postings. And the best option would be to control through authorizations for that particular user. Check with your basis consultant.
regards,
radhika

Transfer posting with clearing .with out clearing

Hi
How we do Transfer posting with clearing /with out clearing
whats the purpose
Many Tha

hi with clearing means u r paid that amount directly
for example first u can give/receive advace from customer/vendor thru f-29/f-48
purchase/sales the items theru fb6o/fb70
transfer the values from spl g.l to normal g.l f-39/f-54
normal a/c clearing is f-32/f-44
above process is called with clearing
without clearing means u have purchase/sales for one person
after that that amount is transferred another person that is called withou clearing
example
purchase/sales the items theru fb6o/fb70
transfer the values form one customer/vendor to another customer/vendro thru f-31/f-51 i think it will be helpful.

PROBLEM IN TRANSFER POSTING WITH REF. TO RESERVATION

Dear cons
I have been facing a problem in t- code- MB1B. I have configured for p.o field in mb1b . in screen layout of transfer posting I have done.because we want a p.o no. field in MB1B.So we generally transfer the material with reference to reservation. so we created a reservation with t-code- mb21 with movement type-415. after that we want to transfer with reference to reservation. but the system gives an error message that
CHECK TABLE XMRES : ENTRY 0000000000 0001DOESNOT EXIST.
MESSAGE NO. M7001
DIAGONISIS ; IN TABLE XMRES THE ENTRY 0000000000 0001 IS MISSING
PL. LOOK INTO THIS MATTER.
THANKS
NRK

Hi,
How you are configured the new PO field.
in OMJJ, the system given the what are the possible options, otherwise its very diffcult to configure.
So check at :OMJJ
regards

Transfer posting with MT 321

Hi PP/QM Expert,
I am facing a problem while Transfer Posting using M Ty 321...
Performance Assistance giving the solu as follows
The inspection stock should be increased, although an inspection is not foreseen for the current goods movement.
The inspection stock should be released, although you can only do this using the QM transactions.
so plz tell me the right way that how i will overcome the error.
Thnks in advance...
Nitu.......

Hi Nitu,
With what trx you are trying to post the stock through 321. 321 movement type is used to post the stock from QI to Unrestricted. Via Stock posting, the trx to be used is QA11. Otherwise it will give you the error.
Regards,
Shyamal

Auto transfer posting in MIGO

Dear experts,
Requirement is like, whenever we do goods receipt and save in MIGO(tcode), the transfer posting should happen after the commit work of MB_POST_GOODS_MOVEMENT. Could anyone suggest which is the correct enhancement-point to implement the code?
Thanks,
Adithan

Hi,
did you try to use this BADI: BADI_DIAD_GOODMVT_1. This is from BADI documentation
This BAdI enables you to initiate follow-up actions after a goods
movement. Using the number and year of the material document, the system
reads the goods movement data in the customer-specific coding and
triggers the relevant actions.
It has also sample code.
Cheers

Transfer posting with reference to Material Doc and PO

Dear all,
Any Idea on how to use this function Transfer Posting wrt Material Doc/PO.
Basically there is a genuine requirement from client which seems quite logical. There are two PO to different Vendors. Goods are receipt and sent to Quality Inspection. Once visual inspection is done, material from one Vendor is sent to Unrestricted and other still lying to be inspected. Material is transferred to Unrestricted. How does we tag that Stock of Vendor 1 is sent to unrestricted and Stock from vendor 2 is still on Inspection.
There may be multiple Vendor in this case.
Secondly, there are more than 50 line items in the PO, I have checked all the items and decide to sent it to unrestricted. And, to save time and confusion, I need to refer the GR/PO.
No batch
Any input. And how does this new function (attached image) is helpful. It is not possible to refer the PO/Mat doc during TP though the option is there.
Regards,
Lakhya

Hello ,
Case 1- Remining quantity will not be taken and sent back to vendor.
you can just reject the quantity if you don`t want it any more.So only one invoice will be happened for the quantity which you have transfer
if you will be returning the remaining quantity then do the config for auto return in SPRO.
So steps will be like this,
1) create po for 100
2) do GR in Quality
3) post 90 in unrestricted and 10 in return while doing the UD in QA11
4) do the invoice it will be done for 90.
case 2 - remaining quantity will be taken in afterwards
if you want partial UD then it wont be possible , And you have to either plan your receipts to accommodate full quantity of item in single lot .
you can either do a enhancement to restrict the MIRO before UD is done using LMR1M001
hope this help.Search on net you will get thread for this requirement.
Thanks
Kunal

Transfer posting with clearing missing line item

we create a customer FI invoice 300 USD for one customer A, reconcill. account is 1019500, we do fb05 transfer posting clearing, thus another account is temporary account :1015600, the clearing document type is Z1,
(40) Dr: 1015600 300 uSD
(17)Cr: customer A 300 USD
in FBl3n for 1015600, we see line item 300 USD, in FBL3N for 1019500, we also see line item 300
but in FBL5N for customer, we can't see document type Z1 and line item 300, why this happens
my document type Z1 already set intercompany posting and customer account type allowed.
I tried post incoming payment, also can't see line item, but for invoice, we can see line item.
why clearing doc not appearing in customer line item?

I choose all items,
the funny thing is the invoice 300 USD is in cleared status, thus no open item, but the customer balance is not correct, it should be 0, not 300 USD.
why it is cleared , but bal is not zero and line item doesn't show this cleared doc?.

Transfer posting with clearing

Does anyone know how to transfer open item from one customer account to another customer account using TCode F-30.

Hi,
We can do the same through F-51 also. First specify the document header information. for the first line item specify the customer debit or credit posting key, customer number, and special gl if you want (Here you have to give customer number to whom you want to transfer) press enter
in this screen specify the amount. and go to Choose open items new screen will come
Specify the customer number and in additional selections choose document number and then click enter. the one line item only appear here then go for simulate. if required specify the narration by double clicking on the line item.
hope this is clear,
Regards,
Sankar

Transfer posting in MIGO- need BADI

Dear All,
i have this issue
Stock transfer From Material code: 736
Same storage location and Same Plant to material code: 9010 same storage location and same plant and same Quantity and same UOM and Addition UOM.
Example:
Material: 736
SLoc: CT16
Plant: 1100
Quantity: 100 KG ( KG only Base UOM)
Additional :
Transfer the material.
Material: 9010
Sloc: CT16
Plant: 1100
Quantity: 100 KG (KG only Base UOM)
Additional:
need to find the BADI. i have googled and checked with few badi's MB_MIGO_BADI;and MB_DOCUMENT_UPDATE.
but couldn't solve the issue.
Need to find the BADI and its corresponding method.
regards,

Hi Naren,
I will tell you four methods to find a BADI,
Method 1. If you think that it is a simple requirement then got SE18 and click on F4 and Iformation Systems. In the short description enter the short text and search.
Method2. Another simple method is to search with Package.
Method3. Put a break point in the FM SXV_GET_CLIF_BY_NAME and then run your transaction
Method4. Put a break point in the class CL_EXITHANDLER for METHOD get_instance. and then run your transaction.
Hope this material helps.
ThnX,
Bhargav.

Transfer Posting with MIGO.

Similar Messages

Maybe you are looking for