Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

Hi,
I am working with MTO scenario.
I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
Below steps are being follow:
Scenario is MTO ( special stock subcontracting)
1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
2. RM code - 61, available stock 100 TO & batch no.0000000127
3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
5. Item Data details tabs are blank.---This is the issue / error.
Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
Please have a look on attachment for SAP screen issue.
Regards
Mohit Jaiswal

Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

Similar Messages

Error in Transfer posting for movement type 303

Hi Sir,
I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
Error in Function:
Order    not found or not permitted for Goods Movement.
I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
Transfer posting
Transfer posting without reference to a reservation
The following fields must be populated:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
Please help me .........
Regards,
Krishan

I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
With that said our system does require posting date, and batch. You might check that.   Also check that you've included all the required information in the header.
Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

Error in Goods issue with movement type 541

Dear Users,
I have created a Sub contracting PO. After that when i m issuing the goods to vendor with movement type 541, its giving the following error: Movement type 541 is not planned for this operation.
Please help me out

You can provide material to vendor either using Transaction codes :
1. MIGO - Transfer Posting - Other - Movement type 541
2. MB1B - Movement type 541 or
3. ME2O - Mention the vendor & execute
S. Kumar

Movement type 313 and 315 with special stock K.

Hi,
I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
it is possible a movement type 313 K or 315 K?
Thanks in advance.
Anna

Hi Anna Barnils ,
Not possible.
Read the below help:
SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
Regards
Ramesh Ch

Automatic Creation of MIGO for stock transfer order with movement type 351

I have used the BAPI - BAPI_GOODSMVT_CREATE_OIL to create the material document number. But the test ended with error "Goods movement not possible with mvmt type 351".
Is there any ways to eliminate the above error....
Friends need your help

351 Goods issue for a stock transport order (without SD)
The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without an SD delivery. A goods issue for a stock transport order with SD delivery is posted using movement type 641 or 643.
The transfer posting is also possible for materials valuated separately.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators: E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Valuation of subsequent Transfer Postings with Movement Type - 412 Q

Hi,
We are procuring raw material by raising Purchase order (without account assignment) and receiving it as unrestricted stock i.e. Plant stock.
Whenever the material is required for a particular WBS element, then we are transferring the Plant stock to Project stock with Movement type 412 Q. That special stock is being used for Production orders which are created wrt that WBS element.
Current valuation of Transfer posting with Movement type 412 Q is as follows.
1. When we transfer the Plant stock to Project stock for the first time then System is valuating that stock at the Moving average price of raw material say Rs.50.
2.After transfer posting, values are being updated in the Table QBEW as well as in the Report MBBS wrt Plant, Material and WBS element i.e Rs.50.
3. Again, when we transfer the Plant stock of same material to Project stock for the same WBS element system is valuating the Project stock at Rs.50 instead of at the Moving average price of that material which is Rs.70 at that moment.
So what we understand is that the system is valuating the further goods movements of that material (Project stock) is at the price of Rs.50 which was stored in QBEW table (which was updated at the first goods movement).
So all consumption of that material (Project stock) is valuating at Rs.50, which is not resembling the Moving average price.
Is there anyway to valuate the subsequent transfer postings of Plant stock to Project stock with the moving average price valid at that moment instead at the the price which is updated in QBEW table for the first goods movement?
We can change through MR21, but it is not practically feasible to change the price at each and every time for Plant, WBS element and material. combination.
Thanks & Regards
Madhusekhar Gupta G

Please read the explanation about the design with 412 Q movement in OSS Note 180503 - Val. logic during transfer posting with reversal movem. type

Material to Material transfer with movement type 321

Dear Experts,
Material to material transfer with movement type 309, the system create a price difference account if price control "S"
but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
Exp--- Material "A" with STD price 150
Material "B" with STD price 100
document is created
Material A A/c. Credit 100
Material B A/c. Dr. 150
My question is, the price difference where is adjusting, is finance and costing books of account will effect.
Kindly help to solve the issue
Thanks & Regards,

Dear Wasim,
321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
It's not used for material to material transfer.
Check and revert back.
Regards
Mangalraj.S

Error in BAPI_GOODSMVT_CREATE with movement type *261' after posting

Hi All,
After sucessfull posting of BAPI_GOODSMVT_CREATE with movement type *261' .
After posting ,while checking In mb51 document exists for it but checking in mmbe stock not reduced from resisticted stock.
Can you kindly tell the import parameter to be filled to over come this error.
Thank you.
Thanks,
AMS

Hi Himanshu/ Tejaswini Khante / Madhu,
Thank you all for your kind reply.
@Himanshu....I have tried with LWA_ITEM-STCK_TYPE = BLANK, Still it didnt work.
@Tejaswini Khante ...I checked the MMBE tcode, all the stocks are in 'Unrestricted use' only. The quality inspection, reserved fields are all blank. The materials are not Batch managed.
@Madhu...Yes, i discussed with the Functional, yet to find a possible solution.
Thanks & Regards
Rajesh

Problem on mb1b with Movement type 309

when I use the t-code mb1b to transfer posting with Movement type 309,the system give a hint 'Account 40000000 requires an assignment to a CO object'. I checked the configuration of omwb and obyc.It seems no problem.
So can anyone tell me how to solve the problem? Thanks!

Hi
Alternative to the above solution will tell u which should work,it seems from the error that you need to put the Cost Center or G/L account. But if you don't want
the system to ask you everytime you do the goods transfer, you have to setup
your Cost Element / CO object. Go to transaction KA02 and put the
appropriate CO or Cost Element (when the system gave you the warning,
normally it gives you the CO object that need account assignment) and
assign the Default Acc.Assigment to the CO/Cost Element.
But before you do that, I suggest you to contact your FICO people.
Good luck
Regards,
Susi

Automatic batch number in migo_tr with movement type 301

Hi!
I am trying to do a transfer from a plant to another with MIGO_TR movement type 301.
The thing is that I must enter manually the batch number in the destination plant.
Is there a possibilty to configure the system in order to copy in batch number field for destination plant the same batch number entered in the plant from where I want to transfer?
Thanks!

your system does not work like designed
please read this very old but release independend OSS note 555 - Batch treatment during stock transfer and transfer posting:
Key word: Transfer batch
If you enter materials for stock transfers or transfer postings with movement types 301 to 316 via collective processing and in this case enter the batch number for materials to be handled in batches, the system automatically sets 'Receiving batch' equal to 'Issuing batch'.
Additional key words
Cause and prerequisites
The collective processing screen does not provide space for an additional transfer batch in the two lines provided for a material movement.
Solution
During the stock transfer of material, the batch is usually retained. If you want to change the batch number, you have to enter the item in question step by step (F8=New item).

Different account posting for movement type 412 E ?How?

Account determination for the stock transfer from own stock to sales order stock:
When we transfer the stock from own stock to sales order stock, the amount which gets transferred from own stock to sales order stock is equal to quantity multiplied by the MAP of the item.
We have a scenario where there is a material A having MAP = 10.Quantiy of own stock for A is 100 EA .Now we have got a sales order for A with a quantity of 20 EA for a particular customer .We need sales order stock for this order at a special purchase rate say 8.
Next we have modified the movement type 412 E in such a way that when we transfer the stock from own to sales order stocks it will ask for the amount of the total quantity transferred. When I transfer 20 EA with movement type 412 E it prompts for the amount where we have provided the value 160(=20 X 8). Then save the posting. Accounting entries which happens are as follows:
Dr Stock    A/C u2013 310000       -
160
Cr Stock    A/C - 310000        -
160
In the process it recalculates the MAP of own stock. New MAP = ((100 X 10) u2013 160)/80= 10.5
We do not want the MAP to be effected in this process. We want a posting as below:
                  Dr Stock    A/C u2013 310000       -
160 (for sales order)
                  Cr Stock    A/C - 310000        -
200 ( for own stock)
                  Dr Gain/Loss account -       -
40
In this process the MAP of the own stock remains as 10.But this type of posting does not happen as long as you have own stock available. Is there any way to do the above posting with movement type 412 E . Reversal entry should be possible with movement type 411 E.
Regards,
Feroz Choudhury

Hi,
I am doing the reverse. Transfering Unrestricted stock to Sales Order stock. So it should appear in MBBS.
But in my case for example, if there is a sales order with 3 items, for 2 items posting is as follows:
Inventory account Dr. .....
Inventory account Cr. .....
But for 3rd item,
Cost of Goods Sold (COGS) Dr. .....
Inventory Cr. ....
So in MBBS, only first 2 items appear and not the third one.
Can u tell me what can be the reason for this.
Regards,
Niraj

Not able to create a material document with movement type 103

I am not able to create a material document with movement type 103,
The system is populating the value as 101 .
How do I create a matdoc with movement type 103?

What is the error you receive? Please specify with message number.
On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
I think the 101-103 and 103-101 mvmt type conversion message is standard error message

Movement type 501 in MIGO doing GR for FG Product

I am using movement type 501 in MIGO doing GR for FG Product, at that time its giving error 'no manual posting allow to GL Account'
We dont want to allow any manual posting in this GL . Can be configure this Movement type like that whenever we do GR for FG product it will be automatic posting to GL Account
Regards
Arun

hi,
you can use OMJJ trx for assigning the coreesponding stock G/L to the accounting modifier
In the selection screen give the mov type as 501 and then select the account groupng for mov.types,
there you will the find the account modifier
zob
iN OBYC, ASSIGN THE CORRESPONDING STOCK GL
REGARDS,
VELU

Transfer Requirement for Movement Type 262 to Reservation

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 to reservation?
When i execute a movement type 262 to Order, the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.
Edited by: Alejandro López on Feb 28, 2011 1:55 PM

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

Similar Messages

Maybe you are looking for