Transfer Postings with document no and document year

Hi gurus,
can anyone tell me in f-03 wheather I can assign document date against the document number.One of my user posts the document with reference to document no. when he gives the documnet no. system throws up all document nos available for the 2006 -2010. So is there any way to give doc.no and doc date in f-03 or else is there any other tcode to post this.
Regards,
mohdsams

Hi
You can get the doc. no. and doc date through assignment field in the document, the maximum length of that field is 18. If you want doc. no. which length is 10 and date which length is also 10 so total will be 20. It will be better if you will use 002 in short key in GL Master/Vendor master so that you can get doc. no & year in assignment field. However you can make a new sort key through OB16 by assigning BELNR & BUDAT to get doc. no & date but 2 character will cut as the limit is 18 of assignment field.
Hope it will help you.
Thanks
Jeetendra Tyagi

Similar Messages

  • Intercompany transfer asset with NBV 1 and zero

    Can SAP R/3 system do the transaction intercompany transfer asset with
    NBV 1 and zero value?
    Beside, can SAP R/3 system perform creation of asset with NBV 0 and 1?

    Firstly, had try to create the new asset by T-code AS01 but i need to provide the depreciation period with zero value as the asset is fully depreciated with zero life depreciation. However, system do not allow for input zero depreciation period in the new asset. Kind advice, any configuration need to been set ?
    Secondly, I had try using the ABT1N to do the transfer of asset however it prompt me for entering the intercompany account need to setup? Kindly advise using ABT1N do we need to setup the intercompany clearing account? What are the double entry inccur/impact by using ABT1N to transfer asset?
    For your information, due to the lack of knowledge using ABT1N. We had try to do the manual retirement of asset and manual creation asset and posting the asset using t-code F-02 as mention prevouis question.
    I hope to know how to solve in both method to rectify the problem more effectively.

  • Valuation of subsequent Transfer Postings with Movement Type - 412 Q

    Hi,
    We are procuring raw material by raising Purchase order (without account assignment) and receiving it as unrestricted stock i.e. Plant stock.
    Whenever the material is required for a particular WBS element, then we are transferring the Plant stock to Project stock with Movement type 412 Q. That special stock is being used for Production orders which are created wrt that WBS element.
    Current valuation of Transfer posting with Movement type 412 Q is as follows.
    1. When we transfer the Plant stock to Project stock for the first time then System is valuating that stock at the Moving average price of raw material say Rs.50.
    2.After transfer posting, values are being updated in the Table QBEW as well as in the Report MBBS wrt Plant, Material and WBS element i.e Rs.50.
    3. Again, when we transfer the Plant stock of same material to Project stock for the same WBS element system is valuating the Project stock at Rs.50 instead of at the Moving average price of that material which is Rs.70 at that moment.
    So what we understand is that the system is valuating the further goods movements of that material (Project stock) is at the price of Rs.50 which was stored in QBEW table (which was updated at the first goods movement).
    So all consumption of that material (Project stock) is valuating at Rs.50, which is not resembling the Moving average price.
    Is there anyway to valuate the subsequent transfer postings of Plant stock to Project stock with the moving average price valid at that moment instead at the the price which is updated in QBEW table for the first goods movement?
    We can change through MR21, but it is not practically feasible to change the price at each and every time for Plant, WBS element and material. combination.
    Thanks & Regards
    Madhusekhar Gupta G

    Please read the explanation about the design with 412 Q movement  in OSS Note 180503 - Val. logic during transfer posting with reversal movem. type

  • Very slow transfer speeds with Airport Extreme and MacBook

    I have been using a new Airport Extreme without problem at my home for the past six weeks. The speed and range was excellent with both my MacBook Pro and the MacBook which I purchased a few weeks ago. I came out to Greece with both laptops and a new AP Extreme box for my home network here. After set up I noticed that internet access was lethargic on the MacBook and file transfer between the two computers was extremely slow. The problem seems to be with the new MacBook (although it was working well in London). I've done some speed tests and the internet download speed is only 48 kpbs! I also notice that the range is very poor--in the room next to the router I am down to five bars. If I connect to the AP Extreme with cable I get the full 1Mbps I would normally expect here in Athens (ADSL nominal 2Mbps). The MacBook Pro has no problems with wireless access speeds or range, so I am assuming this has to be a problem with the AP extreme card in the MacBook. Is there anything I have overlooked? Perhaps something to do with setting up the new AP Extreme here in Athens?

    By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

  • How to transfer library with play count and top 25 playlist to another itunes library?

    Hi,
    I would like to transfer all my music, with the play count and top 25 most played and other playlists to another iTunes library on a Mac. How would I go about doing this?

    What exactly are you trying to do?  You already have another library on the computer and wish to add items from another library?  This is not easily done and meeting all the requirements you have posted.  While it is possible to transfer play count I think it is one of the things that requires Applescripting knowledge.
    If you are just wanting to move a library from one place to another that is possible, though still tricky because you start encountering user permissions.

  • Does Lion work with Turbotax 2010 and prior years?

    Does the current year version of TurboTax work with Lion.  Also are there any "cut-off" prior year compatibility issues.  Intuit has not posted a confirmation on their website.

    Thanks baltwo.  I went to the Intuit discussion forum and found a tip which led to solving my specific problem discussed above.  I was able to resolve the problem by turning off the Resume function in TurboTax per the following link:
    http://osxdaily.com/2011/08/01/turn-off-resume-per-app-in-mac-os-x-lion/
    Specifically, I typed the following into Terminal:
    defaults write com.intuit.turbotax.2010 NSQuitAlwaysKeepsWindows -bool false
    I had to recover my original file from a backup, but now all is well with making changes, saving the file and reopening the file.

  • Overdrive transfer problems with new ipad and old ipod

    installed overdrive for ipad on pc (win 7) and ipad2 app.  downloaded book from library site and it allows 3 transfers to devices.
    hit "transfer" and get error message that overdrive is not able to connect to my device(s) yet itunes shows my device and syncs my other items.
    tried the manually manage idea in the help threads. i use firefox. i have installed all of the many itunes/ipad/ipod updates,  tried reinstalls, reboots and new attitude...but not getting anywhere.
    help needed -thanks

    Quote
    Originally posted by Wonkanoby
    1 the board will not accept nor load a drive with old chipsets drivers on it
     do a clean install or over install
    2 you have to set fsb to 166 with the xp 2500  in the bios
    3 if your using an old psu i dout its going to be good enough
    I am having a simular problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive and clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
         Thanks Bruce

  • How  to modified automatic batch number with plant and current year details

    hi all,
            i want tomodify automatic batch number with plant and current year details. if any one understand plz explain.
    thanks,
    radhakrishna.

    Hi,
    I am not clear what is u r requirement exactly?
    I  mean you don't want automatic batch no or modify the batch no.  with plant means and Current year details means.  Can give details more
    Regards
    Ganesh

  • Inventory postings with usage decision

    Dear Experts,
    What is the significance of Posting UD and what is the significance of this with repsect to Inventory postings with usage decision and how and where this can be assigned with the usage decision.
    Thanks,
    Vampire

    Hi Ram,
    The link between stock posting and UD is maintained in trx QS51.
    Here in the UD code under selected set (First see which UD code you selects while performing UD in QA11 screen, and then search out the same in QS51), there is the field name :Posting Proposal to UD". The value in this field determines where to stock should be posted according to the UD code.
    As you select the UD code in QA11, system come to know where the stock to be posted and segregate the stock accordingly when you click on the "proposal" button in QA11.
    Regards,
    Shyamal

  • My old mac screen broke down and I would like to transfer my photos and documents to my new mac. Is it possible to transfer it with the cable without fixing my screen?

    My old mac screen broke down and I would like to transfer my photos and documents to my new mac. Is it possible to transfer it with the cable without fixing my old mac screen? Please help!

    Sure! If the two Macs have Thunderbolt ports, attach a Thunderbolt cable between them. If they have FireWire, or if one has FireWire and one Thunderbolt, connect a FireWire cable (with a TB adaptor if necessary). Reboot the old Mac holding down the T key. Make sure it's connected to power. You'll now see its system drive appear on the desktop of the other Mac and you can use Migration Assistant to automatically transfer files, or drag them over manually.
    Matt

  • Clearing items with New GL and document split

    Hello gurus,
    When clearing 2 items with opposite amount and the same account assignment, the system generates 2 clearing items for the same account whereas I am expecting to have a clearing document without any item (as it is wotking without document split)! In such situation there is no reason to enlarge the credits and debits into the Balance sheet.
    Has anyone of you already faced such situation and have any solution for me?
    Thank you in advance for your help
    Best regards
    Pascal.
    Edited by: Sylvie EHM on May 27, 2009 10:33 AM

    Hi Abhijit and thank you for your first answer,
    I agree with you if more than one segment is used into the same posting but in my case there is only one segment !
    I think that this logic is applied for technical reason as explained into the OSS note N°950773.
    Does any one of you have a genious solution for me or know whether SAP has changed his standard solution?
    For french customers this technical postings are not acceptable since debit and credit variations has to be functionaly justified...
    Thank you in advance for your help.
    Best regards
    Pascal.

  • I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

    I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • Document number in company code and fiscal year has already been

    Hello,
    While doing a PGI of a delivery in VL02N transaction, I am receiving a dump with the above message in the subject.
    Short text of error message:
    Document number 6200 4900000020 2010 was already assigned
    Long text of error message:
    Diagnosis
         Document number 4900000020 in company code 6200 and fiscal year
         2010 has already been assigned.
    System Response
         Termination of processing.
    Procedure
         Check document number range 49 in company code 6200 and fiscal year
         2010 and correct the number range status if necessary.
    I am not sure of the way the number range clearing in SM56. I need to know the object and subobject for the delivery number for the same.
    Does anybody knows about it ?

    What would be the object and subobject for a delivery number entered in VL02N transaction ?
    There are many objects present in VL02N transaction but I am not able to figure out the real one which is needed.
    Please help me with the same.

  • Need a table with asset number and document number

    Hi to all experts.
    Im in a support project. There is an issue in the customized report the total expense for february is coming 10,322 dollars which is 322 dollars extra it should be 10,000 .but i see the table ANEP the value is 10,322 dollars,when i check the corresponding document for the asset no in bseg table im unable to find any asset no ... what could be the problem ............

    Hi,
        In ANEk table ,check field BELNR . the number may be a material document no or Fi Doc no. if it is material doc no then try MIGO - Display -> doc info ->press FI Document.
    Or directly try with fb03.
    Or in BKPf table there will be field awkey. in that field give material doc no and material year combinely , then you will get FI Doc No. then go with bseg table.
    Regards,
    Ravi.

  • Get Material Document Number and Material Document Year

    Hi everyone,
    Right now, i'm developed idoc program. I need material document number (MBLNR) and material document year (MJAHR).  I have information only BAPI2017_GM_HEAD_01 and BAPI2017_GM_ITEM_CREATE. Is there any FM to get this value ? Thank you
    Regards,
    Satria

    Ok, i will explain with more detail about my problem
    Here my pseudocode :
    -  Get data with type BAPI2017_GM_HEAD_01 from Idoc (let we say this X)
    -  Get data with type BAPI2017_GM_CODE from Idoc (let we say this Y)
    -  Get data with type BAPI2017_GM_ITEM_CREATE from IDoc (let we say this Z)
    -  IF Y-GM_CODE <> "06" THEN
           CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
               EXPORTING
                   GOODSMVT_HEADER = X
                   GOODSMVT_CODE     = Y
               TABLES
                    GOODSMVT_ITEM      = Z
       ELSE IF Y-GM_CODE = "06" THEN
           CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
                EXPORTING
                     MATERIALDOCUMENT = ???
                     MATDOCUMENTYEAR = ???
                    GOODSMVT_PSTNG_DATE = ???
    I know that material doc and mat doc year is in table MKPF. But the problem is they are  the primary key, so how i use X,Y,Z in select operation to MKPF? or is there another way using FM ? Thank you
    Regards,
    Satria

Maybe you are looking for

  • Getting the value from a StationGlobal reference variable in TestExec User Interface Editor Mode.

    Hi, I am using the TestExec User Interface editor mode, in the SequenceFileLoad callback from my sequence an instance is made from a C# code module (the code module is located in another dll) , this reference is stored into a station global variable.

  • Trac (project management) and apache

    I'm having some problems setting up Trac as explained in this wiki article: http://wiki.archlinux.org/index.php/SCM_Example_Trac The problem is with Apache and its configuration. Im getting a 403 Forbidden when trying to access the trac web. Here is

  • What is better to buy a ipad 2nd gen or laptop

    what do you think is better an ipad or laptop? what are the differences between them? Andjonny

  • Fund Center

    Hi Sapiens, Where do we assign the Authorisation Group for a Fund Center in Fund center Master Data i.e.,Creation of Authoriasation group for a fund center. There are few WBS elements to be settle which are capitalised. I am unable to settle the same

  • Mpc in bash script

    hi, I am trying to write a little bash script for adding all songs with the same artist as the currently playing song. Here is what I already have: artist=`mpc -f %artist% | head -n 1` search=`mpc search artist "$artist" | sed 's|mp3|mp3"|g' | sed 's