Transfer Product Group to DM

Hi Experts,
Please help.
When I am trying to transfer product group to DM in MC76 facing follow warning message and even I transfer only one member number in Product group get transfer.
What to do to trasfer PG
This PG is not the MRP-relevant PG for all members
Message no. MA538
Diagnosis
You want to pass on product group member data to Demand Management. However, the product group you have specified is not the MRP-relevant product group for all materials.
System Response
A material typically has an MRP-relevant indicator if it is a member of more than one product group. You set this indicator in the product group from which you want the material to be transferred to Demand Management. This prevents planning data for the same material from being transferred to Demand Management multiple times from different product groups.
Procedure
Transfer materials to Demand Management from their MRP-relevant product groups.
Raja.

Dear Raja,
Please refer my reply I have given to you in your previous posting.
Also refer my reply from this link,
Re: Error During MC75
Re: SOP
Hope it will work for you.
Regards,
R.Brahmankar

Similar Messages

  • Can a same member be in two product group?

    hi,
    Can we plan for a member which is part of two  Product group.  Right now I see when transfer demand from Second PG,  the calculations and PIR out of first PG is getting overwritten.  My requirement is to add to existing PIR rather than overwriting it.   Is it possible?
    regards
    Rav

    I think you're confusing Albums and Projects.
    each time i connect my camera to the laptop, i import the photos to a new album,
    No you don't. You can't import to an Album, you import to a Project. A Project has a Box like icon. Projects are a reflection of the organisation if the originals on the HD. Move a shot from one project to another and the file moves too. You cannot have a photo in more than one project +without duplicating the file+.
    Albums, on the other hand, have an icon like a Blue Book. You can have Albums that refer within a single project and Albums that refer all over the Library. Create an album (File -> New -> Album) and drag the images you want to it. The Files remain in their respective projects and are simply linked to the Album. Photos can be in 100's of Albums with no duplication.
    I have previously created an album called 'the best shots of 2010',i now want to add some photos to this album
    Use ratings and a Smart Album and do this automatically.
    Regards
    TD

  • Not able to Create Product Group.

    Hi All,
    Not able to Create Product Group. I has to be solved urgently. The below message form SAP.
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) -> Locking Material Master Records.
    Thanks in Advance,
    Pherasath.

    Hi,
    Use thie below path for creating Product group.
    Goto SPRO >Enterprise Controlling>Consolidation>Consolidation Functions>Automatic Posting>Elimination of IU Profit/Loss in Transferred Inventory>Define Product Groups
    Regards,
    JS

  • Creating a new product group for SOP

    We have SOP set up in our system .When i am trying to create a product group with material as a member , i am getting error , what is this ? Any help
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) -> Locking Material Master Records.

    Hi,
    Check mandatory field and sales and purchase view in material master.
    Please check authorization for it aslo.
    Go to tcode OMSFIX and un check if any field is checked for lock relevant.
    this will open the field in MM01 and you can see the required field,
    You can unlock the material in transaction MM02 (You will find "Unlock" icon in the application tool-bar).
    Please refer this thraed,
    [Thread.|PRODUCT GROUP;
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Sep 11, 2008 10:02 AM

  • Error during Creation of Product Group

    Hi experts
    I am getting below error during creation of Product Group MC84,
    how to solve this
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

    Hi,
    Please refer the below thread,
    PRODUCT GROUP
    Regards,
    Senthilkumar

  • Procedure on Product Group and Versioning in MD61

    Hi,
    Can anybody send me a step-by-step procedure on how to execute the product group and versioning function in MD61at ching_pb @ yahoo com?
    Tnx.
    Regards

    Dear Ching,
    Are you working in an SAP version ECC 5.0 or 6.0?Then follow these steps.
    1.Create a material using material type PROD in MM01.
    2.Assign the materials to the product group in MC86.
    3.Create a plan for this product group in MC81 for an inactive version.
    4.Disaggregate the plan or create a production plan in MC76 for the same inactive version.
    5.Transfer the requirement's to demand management in MC76 from inactive version to active version 00.
    Check and revert back.
    Regards
    Mangalraj.S

  • SOP for product group

    Hi experts,
    I have a problem transferring planed Sales quantities by product groups to SOP.
    I did steps:
    1.     Planned sales quantities by material, KEPM.
    2.     Created product group with members material, MC84
    3.     Transferred planned sales quantities to SOP into inactive version, KE1E
    I can see or change SOP for material (MC88, MC89), but plan for product group is empty (MC82, MC83)!!!! Iu2019ve tried to create sales plan for product group transferring it from COPA (MC82), but it doesnu2019t work. Accordingly Break down PG plan (MC76) doesnu2019t work because plan for product group is empty and there is nothing to distribute.
    4.     Iu2019ve checked planning type SOPKAPA for info structure S076. Structure row Sales  has Aggregation method Total created. Iu2019ve tried to change planning type SOPKAPA, e.g. inserted new structure row. But for product group plan I see the same view, I mean there is no new structure row. Is it possible, that plan for product group used another planning type not SOPKAPA?
    The main question is u2013 how to aggregate/ sum planned sales quantities for product group?
    Thanks in advance!

    Hi,
    Greetings,
    I guess,you know the limitations while transferring COPA plan data to SOP in PP module.
    however,let me repeat 1.Unit of measure maintained in COPA module and PP module should be same.
    further,2.You can transfer planning data to SOP at the product level or the product group level. If you want to plan and transfer data at the product group level, you need to create a characteristic (or characteristics) to represent the product group levels in SOP when you maintain your operating concern. Since in SOP product groups are stored as products in the database, make sure the characteristic you create for the product group has the same type and length as the characteristic "Product" (CHAR 18).
    Kindly check these two limitations.
    Thanks  - GS Rao

  • SRM-MDM Catalog - Transfer Product masters

    Hi Guys,
    I am using SRM 5 and SRM-MDM 2.0. I have uploaded using MDMGX all the product groups, currencies, and UOMs successfully.
    Now I have set up XI and SRM for transferring Product masters, suppliers and contracts. When I run BBP_CCM_TRANSFER, I am getting confirmation with green light. However, I am not seeing any messages in SXMB_MONI. But when I send the suppliers, I could see messages in SXMB_MONI in SRM and Xi and both are with checkered flag (successful). But in MDM, I do not see any supplier entry. Where do I see?
    Also, why I can not see SXMB_MONI message for product master transfer.
    Any help is highly appreciated with loads of points.
    thanks,
    Surya

    Hi Masa,
    Thanks for your reply. I have configured Xi communication channel. I have put the FTP server entries and path to the ready folder in communucation channel as per the ftp server set up. But the file is not in Ready folder when I checked the ftp directory path. It didn't even show any entry in SXMB_MONI in SRM. Do I have to make an entry in "Define Backend Systems" in SRM for SRM-MDM catalog?
    Also, when I transferred the suppliers it is showing up in SRM and XI under SXMB_MONI as successful but was not there in MDM data manager. Do you know where I can find the supplier that I loaded through XI?
    Also, I would like to confirm that my FTP path in communication channel I have changed based on what we configured for our FTP server to the Ready folder and so is it OK or we have to leave it as it is. Is it possible to send me your commincation channel screen shot? I would really appreciate your help.
    I will give so many points.
    thanks,
    Venkata Nibhanupudi

  • Error while creating product group

    hi,
    i am getting error while creating Product group.
    Required parameters missing when calling up module
    Message no. M3749
    Please suggest me.. how to cop this
    Regards,
    amit

    Dear Brahmankar,
    I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
    Please suggest me , this process is correct or it will create any problem in any module .
    Thanks & Regards
    Prabhakar

  • Product Group capacity can not be seen in MF50 output

    Dear All,
    I can not see the product group in 'total capacity' subscreen in output of planning table MF50.
    In MF50 the input parameter i am entering is product group and plant.
    In the scheduling tab of input parameters detailed scheduling and capacity planning is tick.
    For some product groups i can see in output as "Product Groups / Total Capacity" and also in the rows below it shows "Prod.Grp XYZ" then requirement and available quantity rows. After which the production line rows follows.
    For some product groups when enter in initial selection screen of MF50 with same input parameters in output i do not see Product group but i can see "Total Capacity Data" and then the rows starts with production lines. But no information on capacity of product group.
    The setup of all product group is same and are created with MM01.
    Regards,
    Vero.

    Hi Rupesh,
    Thanks for reply.
    In 'Control Tab' i am not selecting any parameter. So in output i can see all materials  in 'Material Data' section which are included in product group  irrespective of requirements.
    I have issue in upper half section of 'Total Capacity Data'. I can see the different production line rows with Requirement / Available rows with capacity values in each period. Unit is %.
    But i do not see 1st row for Product group row with 2 subsequent rows (requirement / available) with unit KG.
    I can see these rows only for some product groups but not for all.
    For the product groups for which i do not see these rows have capacity requirement in selected periods which can be seen in same output in production lines rows. (where selection in input screen is product group and plant)
    Regards,
    Vero

  • Report for list of Product groups

    Hi,
    I wanted to have complete list of all the product groups (created thro MC84) and its members in one report.
    Is there any standard report avl in SAP.
    Regards
    Rishi

    Hi,
    Try using transactions - MC71, MC72 and MC73.
    Revert back.
    Rgds,
    Shrenik

  • Error While creating a Product Group

    Dear All;
    When running MRP, we would like to run it for specific materials only.
    To do so, we need to group the materials in product groups.
    While creating a product Group using T.code MC84, i get an error message
    "The field  is defined as a required field; it does not contain an entry
    Message no. MG144"
    Kindly advise me on how to resolve this.
    Regards;
    Richard.

    Hi,
    Refer below OSS note:
    Note 621753 - MC84: Error message when creating product group & it's related ones.
    Regards,
    Ram

  • Error while creating a product group--Batch input error 9

    Hi,
       While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
    Thks,
    Nilesh

    Hi Neel,
       As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
      Thks for yr help.
    Regards,
    Nilesh

  • Error while creating Product Group in SOP

    HI Gurus,
    When I am trying to create the product group in SOP in MC84 , I get follwoing error.
    "Product group cannot be created (batch input error 7)  Message no. MA218"
    how to slove this?
    Thanks in advance.
    RG

    Rajiv,
    Basically if there are mismatch in the Field selection and fields visible in MC84 you would get this error.
    The workaround suggested by SAP is to create a product group using MM01 with material type PROD, latter on using the change product group transaction MC86 you can assign its members.
    Regards,
    Prasobh

  • Error while creating the product group by MC84

    Hello Friends,
    I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
    Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
       Please guide.

    Dear,
    This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
    Try to create the product group as material of material type"PROD"
    Then you go on adding the memebers in SOP Transaction.
    In some of the versions of SAP it is the problem.
    I have also faced this problem in some versions.
    Regards,
    R.Brahmankar

Maybe you are looking for