Transfer project/ SO stock between 2 storage locations of same plant
HI,
We have a requirement in which the we have to transfer project/sales order stock between 2 storage locations of the same plant.
Transfer between storage location.
311 Q - Project Stock
311 E - Sales Order Stock
Transfer between storage location to own stock
411 Q - Project stock to own
411 E - Sales Order to own
Similar Messages
-
Transfer between storage location to storage location within same plant
Dear Gurus,
We r doing storage location to storage location transfer within same plant through purchase order.
Due to excise requirement we have to raise excise invoice for the same for captive consumption purpose.
Is it possible to make it One step procedure so that GR will take place at same time as GI the way it works for plant to planrt.
In ECC 6.0 option is there for transfer between storage location. I configured but it is not working.
Please check the same.
Rgds,
SaurabhHi Saurabh,
The proceedure you are following is a bit wierd. But I think this is as per your business requirements.
You can continue to follow the same proceedure as this may not be possible through one step movement type.
Best Regards,
Prateksha. -
Stock valuation different for different storage location in same plant
Hi SAP Gurus,
Please provide me a detailed idea and solution for this.
My client has simulated several transactions in MM.
Say it has two storage location 1110 and 1120 under plant 1100
Now in 1120 there are stock movements pertaing to a project (includes stock transafers from 1110 and issues made to project)
Finally, the MB52 report is showing valuation of stock (unrestricted) at different rates for 1110 and 1120.
My client is raising issue, saying the value should be same for stock under a single plant as valuation is done at plant level.
Also, both the stock is under unrestricted category, so valuation should be same.
What could be the issue?
Any solution?
The auditors will raise issue over this.
Please help ASAP.
Regards,
SumitHi Sumit,
In valuation using the moving average price (price control u201CVu201D), the system valuates goods receipts with the purchase order price and goods issues with the current moving average price.
So, for Plant 1110 the rate could be the PO price used for procuring the material whereas for Plant 1120, it is the moving average price and hence the difference in rates.
However the auditors would look after the Material Valuation at the Valuation Area level which is the Plant.
Thanks,
Ankur -
Stock Transfer between Storage Location with Order
Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbaihi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal -
Stock transfer between storage location
Hi
I have following requirement.
I have material which is maintained in two different storage location in same plant at Storage location SLOC1 ( primary location) and ( Storage location SLOC2). This locations are physically separated by 10 Km.
My requirement is if stock at Storage location SLOC2 falls below then it should create stock transport order automatically
Please give all details to be put to maintain configuration and masterdata.Hi
Refer the Link :
http://www.sap-basis-abap.com/sappq003.htm
Storage Location included/excluded from MRP
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. 1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not. You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
Anand -
Transfer posting between storage location
Hi
2 questions: we are going to create a new storage location to make material movements:
1- We have to move stock between storage location.
Storage A(new): without WM
Storage B: under WM.
We would like to know wich is the best practice to do the transfer: MB1B? 301/311 movement type?
2 - If we decided to create a new storage location with WM. Wich are the recomendations or the points we have to consider:
Under the same Warehouse numer? A knew storage type? Wich are the activities in SPRo?
Thanks in advance for the help
Regards
Enzohttp://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
If it is the same physical Warehouse you could use the same Warehouse, otherwise a new or no Warehouse.
If the Storage Locations are near by and stock doesn't cross public roads and it's manually initiated, suggest just use a one step as it's the simplest process.
If there's a significant distance but on-site use two-step or if stock transferred by public roads, use STO. -
Define Shipping Data for Stock Transfers Between Storage Locations
Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage LocationsThe Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps. -
Stock transfer between storage locations and lead time
Hello,
We use stock transfer orders between different storage locations. Is it possible to maintain the transport lead time between storage locations somewhere or do in need to use routes and scheduling?
rgsd
GARHi,
Try using movement type 313 and 315
313 -- Transfer posting SL to SL --- Remove from issuing SL
315 -- Transfer posting SL to SL -- Placing in Receiving SL
Regards -
Stock transfer between storage location in IS -Retail
Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
LiorHello Lior,
in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
If you have further queries related to this, please do post them.
Regards,
Smitha -
Transfer stock from Storage Location to Bin
Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
SumanDear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman -
MRP - Create STO for Stockk Transfer between Storage Locations
Hi Everyone,
I have a scenario where MRP run should create Planned Order as well as STO for a VSF Requirement. The reason is our Plant has got 2 Storage Locations. One is the Production Storage Location and the other is Warehouse Storage Location. The Planned Order should be for Production SLoc and STO should for Stock Transfer from Production to Warehouse Storage Location. Your suggestions are much appreciated to resolve this issue.
Thanks,
Jay.new releaes bring new features........
not all new features can run in old environments.
I know that companies did already Storage location to storage location STOs in 4.6c but they had z-tables to assign customer numbers at storage location level, and they had changed some coding to make it happen.
I am not sure if there is an OSS note that explains the steps and modifications needed......but try to search OSS. -
Project stock valuation storage location wise
Hi all,
I am developing a report for storage location wise as well as WBS element wise project stock valuation. I got a suitable table for project stock as per my requirement i.e. MSPR. Is there any table or any function module updating the value of the project stock for each storage location and WBS element.
Please help.You may look at Trx CNMM by giving project number and then select all wbs elements in the next screen. Then click on stock tab. You can see the wbs stock by storage location.
You can check this program for getting the logic.
Thanks,
Manohar -
What are the list of .stock by storage location
hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.
Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen. -
Stock transfer between stor loc. of same plant triggered by Sales Order
Hello everyone
I need some input regarding triggerring Stock Transfer between 2 storage locations of the plant from a Sales Order.
Sales Org: ABCD
Plant: WXYZ
Stor Location: 0001 & 0002
Now here 0001 is the Picking location for the Delivery Document.
However 0002 is where all the stock is stacked.
Physically they both are different buildings in the same vicinity.
The Business wants the Sales Order to trigger the stock movement from 0002 to 0001 on a daily basis.
So from a end user prospective, they will move the stock from 0002 to 0001 for all the items needed to fulfill the Orders due for Shipment for that day.
What options do I have for this ?
Thanks
VinWell actually the Selling Org ABCD is of a different Company code .. it is a typical case of Intercompany Sales .. where the Plant WXYZ is belonging to another company code.
I have setup the Intercompany Sales Process .. and want to trigger the Stock movement as mentioned above.
I have configured the STO for storage location - stor. location in a Plant. ...
However I am struggling to trigger a STO from a Sales Order.
I tried using the Schedule Lines to trigger a Pur. Req ... however the Supplying Plant field remains blank (which is the same in this case as it is a stock movement between 2 locations of the same plant).
The flow looks somewhat like this
Sales Order -
> Stock Transfer PR in Plant WXYZ -
> Delivery Doc for the STO --- > MIGO to receipt the inventory in 0001 -
> Delivery DOc for Sales Order -
> Invoice for end customer --- > Intercompany Invoice
If anyone has automated creation of a STO from a Sales Order .. please advice
Thanks
Vin -
STO Between Storage location configuration
Hi,
We are using STO configured for Plant to Plant stock transfer.
Now we wish to configure STO between Storage Location
We wish to know whether STO between Storage locations can be used along with STO between Plants.
We are in ECC 6.0.
Regards,
KiranHi Kiran,
Yes, you can use STO with plant to plant as well as STO with st.loc to st.loc. but the plants have to be differnet plants.
Check the customizing for st.loc. sto in ECC 6.0
Cheers,
Satish Purandare
Maybe you are looking for
-
Plug-ins not showing up in Aperture 3.1
I have been using Aperture for a past few days, and when i tried to instal two plug-in programs (photoshelter - it is a photo hosting site and the plug in allows you to upload photos directly to the site, and HSC edit - this is an edit tool I downloa
-
Hi, can anyone tell me how to change fonts in MacMail when composing new messages? Thanks, Bob Tomsak
-
Repetitive mfg - In-process inspection
Hi, Can we do in-process inspection in repetitve mfg. Regards, Sravan Kumar
-
Environment::CreateConnection(user,pass, constring);
I have this Error While trying To Complie OcciDesc.cpp "Unhandled exception at 0x6061f26f in test_10g1.exe: 0xC0000005: Access violation reading location 0x00133000." i 'm using VS++ 2005 and the libraries i'm using : VC6\oraocci10.lib with Vc6\OraOc
-
Installation für die Adobe CS6 DVD
Der Link für meine Installation ist leider falsch, ich bitte um hilfe